Storage Box Corner Support

storageBoxCornerSupport01.stl

Travel Companions Battle Base

travelCompanionsBattleBase.stl

TABLETOP TRAVEL DICE TOWER (SIMPLE)

dice tower V2.stl

Ultralight Indoor Glider Reinforced Sailplane

HTG-Shootable-V1.stl

Cigar Case

Travel case for two cigars. Should hold cigars up to 6.25 x 54. I printed it in PLA+ on an Ender 3 v2 using the default dynamic quality settings in Cura with support turned off.

Of course this isn't a humidor substitute, just a case to provide crush protection in travel.

Travel Toob

TravelToobBase(Large).stl

Space Transport

spaceTransportBody.stl

Universal passport case

Tight-fitting universal passport case to protect any passport.

Collapsing cribbage board

Cribbage board.STL

Boom Supersonic Overture.stl

This is the Boom Supersonic Overture Jet, scheduled to fly in just a couple years.  It's the successor to the famous Concord, but will be faster and more efficient.  

This model is a rough version of the Overture and is relatively to scale.  It's a fun print for painting and displaying.  



House of Blues Orlando Water Tower  (Disney Springs) Hueforge

OrlandoBlues_Front_100x125_S.stl

Drinkware Lid Rack Organizer Bundle – Fits YETI lids

Yeti Rambler medium v2.STL

EPCOT Monorail HueForge

Another HueForge - a photo of the Monorail passing through EPCOT

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Stone Blue Transmission Distance: 0.5
	PLA PolyLite Pro Light Blue Transmission Distance: 1
	PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #7 (0.64mm) swap to Stone Blue
	At layer #12 (1.04mm) swap to Light Blue
	At layer #14 (1.2mm) swap to White for the rest.


Washi tape holder | Stash supplies inside with screw-on lid! | Fits 3 rolls of 16mm width craft tape

Washi tape holder_30mm x 16mm_3rolls_2_5mm_BASE_karenchaudesigns.stl

OP-1 BestCase Decksaver and Stand // Transcends [Red Eye Series] 

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

This design comes from my Red Eye Series, which consists of 3 original art pieces inspired by sleepless nights spent searching for inner peace while making tunes.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

A1A Sign.stl

The famous A1A sign that dots the road along the coast of Florida.  This is a beautiful drive, skirting the ocean in a some spots within just a few feet.

Designed so that you can print it solid or you can pause and switch colors.

Enjoy this piece of American culture and nostalgia.

Route 66 Santa Monica.stl

The legendary Route 66 was THE way to travel across the United States before the Interstate System was built.  Route 66 ends at the ocean in Santa Monica, California.  In fact, it ends right where the pier begins, and there lies the End of the Road sign representing the conclusion of Route 66.

Enjoy this replica, designed so that you a pause printing if you like in order to change colors.  Or print the whole thing in white and use a Sharpie to finish out the black parts.

Enjoy this classic piece of American nostalgia.

Cute Octopus Keychain - Holoprops

Octopus__Keychain_Holoprops.stl

Camelbak Mouthpiece Cover

I whipped up this cap to cover the mouthpiece on my [Camelbak](https://amzn.to/2CUjpPx) so it doesn't get dirty when I throw my bag around in the dirt.

As you can see I have a [mouthpiece conversion kit](https://amzn.to/2xeTn3B) that has an on/off valve and other neat features, but this print should work just fine with the standard mouthpiece. Simply take off the flexible bite valve, put this part over the tube, and put the valve back on to hold this in place.

After PETG and PET+ both failed on me after a few months of use, I've found that a flexible filament like [Fillamentum FlexFill](http://bit.ly/FlexFill) is the way to go! Pistachio Green is a great color :)

d20 coaster

A coaster in the design of a 20-sided die! Catches all the condensation from your (and your guests') drinks to protect your games and tables!

**Like & follow for more free 3D models!**

---

**Interested in selling physical prints?**
[Become a member for a commercial use license](https://thangs.com/designer/karenchaudesigns?plans=true)

**Related model:**
Meeple dice tray: https://than.gs/m/917413


travel

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Storage Box Corner Support

Travel Companions Battle Base

TABLETOP TRAVEL DICE TOWER (SIMPLE)

View 24 new models

Cigar Case

View 48 new models

View 23 new models

View 24 new models

Collapsing cribbage board

Boom Supersonic Overture.stl

House of Blues Orlando Water Tower (Disney Springs) Hueforge

Drinkware Lid Rack Organizer Bundle – Fits YETI lids

View 14 new models

Washi tape holder | Stash supplies inside with screw-on lid! | Fits 3 rolls of 16mm width craft tape

View 78 new models

A1A Sign.stl

Route 66 Santa Monica.stl

View 46 new models

View 66 new models

d20 coaster