This candy machine is small (only 10.5 centimeters and 5.5 centimeters) and fits right in your pocket. It works very well, and is suitable for almost all types of candy.

Need supports in the holes

mini candy machine

candy_machine (4).stl

The **Momentus Mind Camera** is a breakthrough device capable of capturing vivid memories and storing them directly in your brain. The incredibly satisfying and effective clicking noise triggers a Pavlovian response that your brain will come to associate with important memories. Made possible by navigating a narrow labyrinth of legal loopholes, you can now 3D print your own! So get out there and make some memories (at your own risk)!

This is the **PRO Kit**, which includes a bunch of styles and options for your custom mind camera. Try out a basic kit [for free here](https://than.gs/m/1076063?affiliateCode=MAKE).

---

**_Printing Guidelines_**

_Watch the attached assembly video for detailed printing and assembly instructions!_

- 0.4mm nozzle, 0.16mm layer height, 3 walls, 10% infill, 5 top and bottom layers.
- All parts were designed to work with PLA, and should hold up for hundreds of snaps but a more resiliant material like PETG or ABS may increase shutter life. I would avoid softer PLA variants like silk/matte, especially for the Trigger. As always keep PLA parts out of hot environments.
- _Front_loose.stl_ part is included to compensate for imperfect prints, but it's highly suggested to use a tuned printer that works with the default parts for best operation.
- If using a softer filament or want an extra finger workout you can print the _'firm'_ and _'stiff'_ versions of the Trigger, but the standard one should work well for most cases.
- For the multicolor version of the back, make sure to use the correspondening strap type (_'noStrap','StrapA', or 'StrapB'_) for both the _face_ and _main_ STLs.

- Designed to work with my printable [Keychain Loop](https://than.gs/m/1076066?affiliateCode=MAKE) or any [standard keychain](https://amzn.to/4bGq5wJ).
- No adhesives should be necessary, but if you want to glue parts together for extra strength, I suggest [E6000](https://amzn.to/3UIOdso).

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Bambu Lab PLA](https://bit.ly/bamFIL).*


*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 

Momentus Mind Camera PRO // Fidget Clicker + Memory Device

Multi_Front_Main.stl

This latest addition to the **VESUVIUS Collection**, is a small cylindrical pot/container featuring the same dense herringbone ribs that increase part strength while creating a dramatic form.

VESUVIUS 003 is 50 mm tall and 94 mm in diameter. This was designed for use with my [140 mm Floating Drip Tray](https://than.gs/m/1036823?affiliateCode=MAKE) to catch excess water runoff.

**_Printing Guidelines_**

The **VESUVIUS** series of prints are designed to be printed in vase/spiral mode in your slicer. For full scale I suggest printing VESUVIUS 003 with a **0.8 mm nozzle width** (even with a 0.4mm nozzle) and 1.2mm of solid bottom layers. No top layers. **Make sure your slicer is not set to close small gaps.** In BambuStudio I set the _'Slice gap closing radius'_ to 0 mm

For the 'wHole' version of the vase mode print, use the maximum number of solid bottom layers before the holes are covered to avoid interfering with the spiral printing. You can also print the version without holes and simply drill/cut your own drainage holes in the bottom after printing if you plan on growing live plants.

I've also included a 'Solid' version for standard printing, with roughly 1.2mm thick walls. This will be extra strong, but uses much more material, and I've found the vase mode version to be preferable.

---

Photographed models were printed on the [Bambu Lab X1-Carbon 3D Printer](https://bit.ly/MA_X1C) using [Fillamentum PLA Extrafill Sky Blue and Signal Red](https://bit.ly/FM-xtra) (also at [MatterHackers](https://bit.ly/xtrafill)).*
*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_

VESUVIUS Pot 003 // Small Cylinder Vase Mode Planter

VESUVIUS_003_1.2mmSolid_wHoles.stl

The first [Rejected Animals](https://www.instagram.com/rejected.animals) model designed for resin printing is Mozz!

About 5.5" tall assembled 

The photographed base was custom modeled by 3D pen, but I've included a simple base with pegs connecting to the feet. Feedback is appreciated, and I will do my best to make any necessary improvements!

[Relevant Video](https://youtu.be/-Gukk_KGTgc)
 

tiny

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

mini candy machine

Momentus Mind Camera PRO // Fidget Clicker + Memory Device

VESUVIUS Pot 003 // Small Cylinder Vase Mode Planter

Rejected Animals // Mozz