clearance tolerance tester 

Unlike most clearance testers, this one goes in 0.05 mm increments. While it isn't very fancy, it's easy and cheap to print, and doesn't suffer from inaccuracies from elephant's foot or difficulties with overhang.

If you're looking to implement hinges or other similar features to your prints, this tester will help you find the perfect fit  

Improved clearance tester 

XYZ_CallibrationCube.stl

This is a small and simple XYZ calibration cube for checking the dimensional accuracy of your printer.   The cube has X, Y and Z written along their respective axes.

Once printed either use an accurate ruler or callipers to measure the dimensions of the print. The original model size is 20mm*20mm*20mm however you may wish to resize it to be bigger (or smaller). 

Once you have measured your dimensions you may want to adjust the steps or steps per mm for each axis in your printers firmware - This may or may not be possible depending on your printer. 

To do this you will need to find your current Steps per mm, and then have your observed dimension and expected dimension.

To calculate the new Steps per mm you will need to do:

(Expected/Observed)*Current Steps per mm = New Steps per mm

It is also good as just giving a gauge of how well your 3D printer works with small over hangs and flat faces to check for Z-Banding or ghosting!

Pill Organizer Bullet — Pill fit tester

Bullet Casing.stl

Fit and Tolerance Reference Tester

Fit and Tolerance Rectangular Whole.stl

Voyager kailh choc tester (original by ZSA)

voyager_tester_left.stl

Wizardizer 2020

wizardizerWhole.stl

The Phoenix Printer Test

TortureTest v1.stl

Ripple Benchy - Test Print

RippleBenchy.stl

8 Slot Keycap And Switch Holder/Tester

Keycap And Switch Holder R 5pc.3mf

tester

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

clearance tolerance tester

XYZ_CallibrationCube.stl

Pill Organizer Bullet — Pill fit tester

Fit and Tolerance Reference Tester

Voyager kailh choc tester (original by ZSA)

Wizardizer 2020

The Phoenix Printer Test

Ripple Benchy - Test Print

8 Slot Keycap And Switch Holder/Tester