Ginger Bread Man Ornament Card

GingerBreadManCard.stl

Auxetic Cubes // 18mm 4x4

Auxetic Cubes 18mm 4x4.stl

Screwball Puzzle

C.stl

Flexi Gingerbread Man

Flexi Gingerbread Man.stl

Auxetic Cubes // 20mm 3x3 rounded Fidget Toy

Auxetic Cubes 20mm 3x3 rounded.stl

Origami Inspired Tree Ornament #2

Origami Inspired Tree Ornament #2.stl

Origami Inspired Tree Ornament #1

Origami Inspired Tree Ornament #1.stl

SKEWBITS (v1) Puzzle Game for 3D Printing *OUTDATED*

Grid.stl

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Google Pixel 6A TPU BEEFCASE // MOO

6A_moo_B.stl

Google Pixel 6A LEANBEEF Hard Case // Flow

6A_LEAN_flow.stl

X-ACTO Knife (Gripster) Cap

A blade cover for the [X-ACTO Gripster Knife](https://amzn.to/405Yv5V) and the [No 11 Classic Fine Point Blade](https://amzn.to/3tk2EYC). This model is a personal favorite for its rubberized barrel that provides comfort and control.

This print has a small footprint, so I recommend printing with a wide brim for better bed adhesion, but that will ultimately depend on your printer.

This cap can also be softened with a heat gun to change the size to fit a regular metal X-Acto knife and some other models.



Photographed model was printed with [MatterHackers Yellow PRO Series PLA](https://bit.ly/PRO-PLA)

Zørp-O'-Lantern Head

Zorp_Head.stl

Zørp-O'-Lantern

Big Tippi Jack-O'-Lantern

Tippi_Big_JackOLantern.stl

Icosahedron Earth // Folding Polyhedra

large-full-land-all.stl

Snapmaker 2.0 TPU Clamp (for laser engraving & cutting)

Here is a simple part that I found to drastically improve my experience with the Snapmaker 2.0 laser module. Print in TPU to give the flex required to press fit into the laser bad and stay there. 

Unfortunately it seems like the other Snapmaker machines have different bed designs, so these might only work for the Snapmaker 2.0 models (350/250/A350T/A250T/F350/F250)

Hooman Googly Eyes

lashes.stl

RODE smartLav+ to Handheld Mic Conversion

lavmic-handheld2.stl

support free

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ginger Bread Man Ornament Card

Auxetic Cubes // 18mm 4x4

Screwball Puzzle

Flexi Gingerbread Man

View 10 new models

Origami Inspired Tree Ornament #2

Origami Inspired Tree Ornament #1

View 12 new models

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

Google Pixel 6A TPU BEEFCASE // MOO

View 17 new models

X-ACTO Knife (Gripster) Cap

Zørp-O'-Lantern Head

Zørp-O'-Lantern

View 16 new models

View 78 new models

View 21 new models

View 20 new models

View 66 new models