Floating Eye Tealight Stand or Wall Mount

FloatingEyeballStand.stl

Coathanger S-Hook

S_Hook_35mm.stl

EZPZ Pegboard Hook // 15mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Deadpool Katana | No AMS, No Support, No Glue

Deadpool Katana 3MF (For Bambu Printers).3mf

Candy Cane Dagger – Dagger Kit (No AMS, No Support, No Glue)

Lava Red.stl

Pickle Tickle

Pickle TickleR1.stl

Springo Gift Box (Single Color Version)

One cool thing about Springos is that you can hide little trinkets inside of them. That is especially appropriate with this gift box springo!

Print at .15mm layer height and make sure the coil part is printed solid. 3 shells/outlines have given me good results. No supports required!

This is the single color version of this model. You can find the split model for dual color/material printing in my Holiday Springo set [here](https://www.myminifactory.com/object/3d-print-80142).



SKEWBITS v2.0 Puzzle Game // Premium Set + Problems 001-010

bit_A_red.stl

Santa's Sleigh Flatpack

sleigh_flatprint.stl

Auxetic Cubes // 18mm 10x10 Stacked

Auxetic Cubes 18mm 10x10 stack(PREVIEW ONLY).stl

Tetrahedrons // Folding Polyhedra

tetrahedronbig-wire.stl

See No Evil Frog

OnlyFrogs_006.3mf

PLEIADES Soap Cover // 57x83x103

PLEAIDES Soap Cover 57x83x103.stl

Small Hook // Peg Anything

A little hook I made to hang my rulers, but it'll work great for lots of things. Very quick print. Print solid. Give it a try and share how you used it!

Made for standard pegboards with 1/4" holes.

Baby Springo

This tiny Springo is more 'springy' than the larger ones. It has the same tolerances as my larger models so it's a good quick test before printing larger Springos.

Ideally, you should not scale this model and print at .15mm layer height. I carefully split the layers apart using an X-acto knife. They should come apart quite easily without having to cut through plastic, you are simply pulling apart the weak bond between the rings. 

If your layers aren't separating, try lowering print temp./increasing print speed. Quick layer cooling helps so use your cooling fan at 100%.

2+ shells, 100% infill.

support free

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Floating Eye Tealight Stand or Wall Mount

Coathanger S-Hook

EZPZ Pegboard Hook // 15mm Reinforced Hook

Deadpool Katana | No AMS, No Support, No Glue

Candy Cane Dagger – Dagger Kit (No AMS, No Support, No Glue)

Pickle Tickle

Springo Gift Box (Single Color Version)

SKEWBITS v2.0 Puzzle Game // Premium Set + Problems 001-010

Santa's Sleigh Flatpack

Auxetic Cubes // 18mm 10x10 Stacked

Tetrahedrons // Folding Polyhedra

See No Evil Frog

PLEIADES Soap Cover // 57x83x103

Small Hook // Peg Anything

Baby Springo

Holiday Nunchaku – Chained Kit (No AMS, No Support, No Glue)

Mini Christmas Dragon Keychain

75mm PERSPEKTIVA Cube

He-Man Cellphone Dock | No AMS, No Support, No Glue

Auxetic Cubes // 18mm 4x4 Stacked