Loops Floramorph

Head pentamerous +Key slot T0,4.stl

Loops A T0,4.stl

3D model description
Simple to print and highly addictive, this beautiful fidget can be assembled in approximately 1 minute and requires no glue or additional parts to build

Featuring a brand new design previously unseen in past gear fidgets, this new gear fidget utilizes a brand new internal design making it simpler and quicker to build then ever before

Comes with appropriate STL files and optimised 3MF files to easily print your own, simply choose your colors and print in any filament

Can easily be printed on any FDM printer with an AMS however single color printers can print also easily in regular PLA (an AMS unit is required for silk filaments only)

Check it out here now on youtube - https://youtu.be/RriN1ewgIiw

3D printing settings
Download now, files includes 2x STL files and 3x 3mf files each containing 9 pieces to print (9 pieces creates one full spinner - 1x centre piece, 4x left pieces and 4x right pieces)

Can be printed in silk & regular PLA, an AMS unit is required for SILK as the joining section and centre piece must be printed in regular PLA (adds only a tiny amount of time to print and filament to purge)

You can print the outer section in any color of filament you desire but ensure to use regular PLA in the centre and on the inside of the gears (the first color printed touching the plate in regular PLA)

If printing from the stl files included please use the following and ensure to print 1 centre, and 4x of gear piece 1 and 4x of gear piece 2

To print and standard supports to the gears with the option touching build plate only enabled

Z-hop is required for the top section of the gears to massively boost print quality

Arachne walls enabled for improved quality

Gyroid infill enabled for better bed adhesion

Low speed printing is recommended and essential for silk (silk approx. 60mms)

The provided 3mf files are all optimised and ready for printing, simply select your colors and print (if changing the colors please double check z-hop remains enabled)

Once printed to assemble simply insert the gear pieces into the centre (the orientation is important but very simple, simply add a gear piece one using the push fit, and then a gear piece 2 next to the gear piece 1 and then another 2 next to the one etc... ensuring none of the same numbered gear pieces are next to one another)

When inserting the gear pieces i recommend not pushing from the 3 support struts but instead from the centre on the opposite wall of the insert to minimalize potential damage

I recommend using a small amount of grease in the centres holes but not essential

Once all 8 pieces and been inserted your new fidget is ready

Have fun & any issues I'll be sure to help as best as possible

Bare Gear Fidget Spinner Cube

CENTRE PIECE SOLID.stl

Anemone Floramorph 
fidget flower spinner toy.
fragile anther parts with this one. 

Anemone Floramorph

Anemone anther T0,4.stl

❗ *You may only use this file for personal purposes, and you are not authorized to sell either the file or any printed items derived from it.* 
❗ To legally sell physical prints of this and all other designs without paying individual licensing fees, an active monthly Patreon Subscription is required. [BNS3d Patreon!](https://www.patreon.com/c/bucklenshackle/shop?)

❗If you would like a one time purchase commercial license to sell [click here: ](https://cults3d.com/en/creations/dice-vial-modular-display-commercial-use-version)

- - -

Do you have a collection of Dice? Do you Sell Dice Sets at your Local Craft Shows? Download the Dice Vial Modular Display to showcase your collection or wares in an exciting way!

- - -

**Can be Set up in any combination you like.**

- REQUIRES an (8mm) Linear Motion Rod Length of your Choice.
- REQUIRES Test Tube Vials of atleast 1" (25mm) Wide that has a flange at the top or a cap that is wider than the tube. To fit 7 Dice (20mm), you need a vial that is atleast 5.5" (140mm) Long [A 2mm Tolerance is added to the inserts as some plastic tubes are not uniform]
- OPTIONAL 6x One Inch (25mm) Felt/Rubber Pads

**EXAMPLE IN PHOTOS:**

- 8mm x 350mm of 600mm Linear Motion Rod, (these can be bought in pairs of 2 on Amazon for around 10-15$), 

- 25mm x 140mm Plastic Test Tubes with flange at top (mine are 45ml)

Pieces Used for 350mm Rod: Base, 50mm, 12 Insert, 125mm, 8 Insert, Top Sign Holder, 2x D20 Sign.

Pieces Used for 600mm Rod: Base, 50mm, 24 Insert, 150mm, 16 Insert, 150mm, 12 Insert, 35mm, Top Sign Holder, 2x D20 Sign.

- - -

**Personal Use Version Includes:**

- Dice Vial Modular Display - Base (With Bucklenshackle.com  Branding) 8.1/8.3/8.5mm Tolerance Versions
- TOLERANCE TEST
- Dice Vial Modular Display - 10mm Cylinder
- Dice Vial Modular Display - 15mm Cylinder
- Dice Vial Modular Display - 25mm Cylinder
- Dice Vial Modular Display - 35mm Cylinder
- Dice Vial Modular Display - 50mm Cylinder
- Dice Vial Modular Display - 75mm Cylinder
- Dice Vial Modular Display - 100mm Cylinder
- Dice Vial Modular Display - 150mm Cylinder
- Dice Vial Modular Display - D20 Sign - Blank
- Dice Vial Modular Display - Top Sign Holder
- Dice Vial Modular Display - 8 Vial Insert - 27mm
- Dice Vial Modular Display - 12 Vial Insert - 27mm
- Dice Vial Modular Display - 16 Vial Insert - 27mm
- Dice Vial Modular Display - 24 Vial Insert - 27mm
- Dice Vial Modular Display - 8 Vial Insert - 29mm
- Dice Vial Modular Display - 12 Vial Insert - 29mm
- Dice Vial Modular Display - 16 Vial Insert - 29mm
- Dice Vial Modular Display - 24 Vial Insert - 29mm
- Dice Vial Modular Display - D20 Sign - No Words
- Dice Vial Modular Display -  D20 Sign - Pick Your Poison Vial of Dice $5
- Dice Vial Modular Display -  D20 Sign - Pick Your Poison Vial of Dice $10
- A 3MF Painted File Dice Vial Modular Display -  D20 Sign - Pick Your Poison Vial of Dice MMU PAINTED.3MF

___

**Updates:**

May 7th - I have added another set of Vial Inserts with Larger Holes to fit wider Test Tubes. It can be used with some Test Tubes that are upto 25mm or 27mm Wide that either have a flange or have a Cap that is larger (so they don't fall through)

June 5th - I have added a new $10 Sign and updated the MMU.3mf File

**What's Compatible?**

Test Tube Vials of atleast 1" (25mm) Wide that has a flange at the top. To fit 7 Dice (20mm), you need a vial that is atleast 5.5" (140mm) Long  [these are generally marketed as 45ml]

Test Tube Vials of atleast 1.06" (27mm) Wide that has no flange at the top its just a cap that is wider than the tube. To fit 7 Dice (20mm), you need a vial that is atleast 5.9" (150mm) Long [these are generally marketed as 65ml]

[A 2mm Tolerance is added to the inserts as some plastic tubes are not uniform]

Only 8mm Linear Motion Rods can be used in any length. Print the tolerance test first to ensure the rod is secure in the base.

___

Designed by Buckle N' Shackle

- - -

**License and Modifying:**

- You are authorized to: Print this item for personal use, give away a printed as a gift, or donate to charity.
- Only the D20 Signs can be modified with Text/Logo

- What is not allowed: No Selling, No sharing of files, No Adapting or remixing of my file, no modifying this file with any Text & Logo.

If you would like a one time purchase commercial license to sell [click here: ](https://cults3d.com/en/creations/dice-vial-modular-display-commercial-use-version)

- - -

**Adding Attributions:**

*Printing my item? I would really appreciate it, if you tag me and credit me @bucklenshackle on Socials.*

Please do one or all of the following: Add Buckle N' Shackle, tag my socials @bucklenshackle, add a link to this cults3d page or my website*

- - -

**Authorized Sellers** For a list of all their socials [Click Here: Authorized Sellers List](https://www.bucklenshackle.com/authorized-sellers)

*Authorized Sellers will be listed on my website when you purchase the commercial license. Please contact me to get your details added.*

- - -
*Printing my item? I would really appreciate it, if you tag me and credit me @bucklenshackle on Socials.*


Dice Vial Modular Display - Personal Use

Dice Vial Modular Display - 8 Vial Insert - 27mm.stl

Zephyrus Floramorph

Zephyrus stamen.stl

Revolver cylinder fidget spinner toy with bullets that magnetically and satisfyingly pop in and out. Spinner, loader, toggler and clicker in one stylish package!

&nbsp;

---
**Printing tips:**
The parts are already oriented optimally. No supports needed for any parts!

If you're using Orca Slicer or Bambu Studio, a handy project file is included that has my print settings and painted parts ready to go!

&nbsp;

---
**Assembly:**
You need 6x2mm magnets for the cylinder, and either 6x 6x3mm or 12x 6x2mm round magnets for the bullets. The bullet tip has enough room for one 6x3mm or two 6x2mm magnets.

See the included assembly video!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

spinner

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Loops Floramorph

Bare Gear Fidget Spinner Cube

Dice Vial Modular Display - Personal Use

Revolver Cylinder Fidget Spinner Toy