**A loveably quirky articulated Opossum**, with a poseable mouth so you can make him scream in excitement (or anxiety)!

Here's a quick [demo video](https://youtu.be/MGKBbPxaGE4) of the assembly.

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!

Please, share photos of your makes! I would love to see them!

PLEASE READ:
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://www.myminifactory.com/object/patreon.com/matmire_makes) or [MMF Tribe](https://www.myminifactory.com/users/MatMireMakes).

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

**Printing Details**
-   **Head:** Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed.
-   **Jaw:** Snap-Fit to Head. Pre-Supported for easy printing. No additional support needed.
-   **Body:** Print-In-Place. No additional support needed.
-   **Tail:** Snap-Fit to BodyRear.
-   **3MF:** includes multicolor 3MF file that is compatible with both PrusaSlicer and Bambu Studio
-   5%-15% Infill.
-   3 Walls.

Here's a quick [demo video](https://youtu.be/MGKBbPxaGE4) of the assembly.

Opossum - Articulated Figure

Opossum_Head_v01R.stl

MMM_Opossum_MultiColor_v01_BambuEtc.3mf

MMM_Opossum_MultiColor_v01_prusa.3mf

**I hope you like my new Ferret design!** This fella has a new feature that adds another level of fun and posing, belly muscles! Well, not really... but if you simply add a rubber band to special channels along it's belly, it adds the tension needed to keep him standing with his belly off of the ground, yet he still remains super-flexible! Please watch [**This Video**](https://youtu.be/fj8n6YVZI5k) for a demonstration of the model and the proper way to string up the rubber band (it needs to be twisted between each link to work correctly).

In addition, he comes with optional belly extension links, so that you can make your Ferret belly as long as you want! I personally prefer one added extension. They come in two version, style A and B. Both are functionally identical, but have slightly different texturing so that the fur pattern doesn't repeat.

**Updated:* Newer Multicolor 3MF with more fur pattern detailing.

Please, share photos of your makes! I would love to see them!

**PLEASE READ:** All MatMire Makes Designs are protected under Copyright Law.Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my [**Patreon**](https://www.patreon.com/matmire_makes) or [**MMF Tribe**](https://www.myminifactory.com/users/MatMireMakes?show=tribe).

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
.
.
**PRINTING DETAILS**
A few of the parts have small connective "anchors" on the first layer to help with bed adhesion. You will need to trim them away before adding the rubber bands.

I use size #12 rubber bands (same size as used in my Bat design), [like these here.](https://www.amazon.com/dp/B0035GE3YA?asc_item-id=amzn1.ideas.1TNMBMGM4SU9F&th=1&qty=1&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&linkCode=ll1&tag=matmiremakes-20&linkId=41fc328f5170fec5d81f12c8c812723d&language=en_US&ref_=as_li_ss_tl)***

- **Head:** Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed. Remove the neck clip pre-support after printing.
- **BodyFront:** Print-In-Place. Snap-Fit to BodyRear or Extensions.
- **BodyRear:** Print-In-Place. Snap-Fit to BodyFront or Extensions.
- **ExtensionA & ExtensionB (optional):** Make the body longer by inserting these in between BodyFront and BodyRear! The only difference between the two is the fur texture, so that you can avoid a repeated fur pattern.
- **Tail:** Snap-Fit to BodyRear.
- **Multicolor 3MFs:** Compatible with PrusaSlicer, Bambu Studio, Orca based slicers. *(for Orca based slicers… it's often better to use File>Import rather than Open Project, so that it doesn't import any printer specific presets/settings.)*
- 5%-15% Infill.
- 3 Walls.
- This should generally scale down to about 65% with full articulation, on a well calibrated printer. YMMV

Please watch **[This Video](https://youtu.be/fj8n6YVZI5k)** for a demonstration of the model and the proper way to string up the rubber band.

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

***Paid Link. As an Amazon Associate I earn from qualifying purchases.


Ferret - Articulated Figure

Ferret_BodyFront_v04.stl

Ferret_BodyRear_v04.stl

Ferret_ExtensionA_v04.stl

Ferret_ExtensionB_v04.stl

Ferret_Head_v04.stl

Ferret_Tail_v04.stl

MMM_Ferret_MultiColor_v04_bambuEtc.3mf

MMM_Ferret_MultiColor_v04_prusa.3mf

**I hope you enjoy this articulated Crested Gecko!**
This design comes with two separate snap-fit tail options. In reality, Cresties drop their tails quite easily, and unlike many other lizards... theirs don't grow back. As a result, there are many many cresties out there without tails. I wanted that "frog butt" to be an option for my model too, so you can print either the full tail or the little nub and snap-fit it to the body.

I put together a short video demonstrating the model's features.
This includes the swappable tail options, head pre-support removal, head attachment, and leg locks. [[Watch Here](https://youtu.be/P9llZj7NBvs)]

Please, share photos of your makes! I would love to see them!


**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use.  You do NOT have permission to resell or redistribute those digital files in ANY way.  This includes altered or "remixed" versions of the designs.  Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.

**Printing Details**
- Body: Print-In-Place.
- Head: Snap-Fit to Body. Pre-Supported for easy printing. Break off pre-support after printing. No additional support needed.
- Full Tail: Print-in-place. Snap-fit to Body
- Nub Tail: Print-in-place. Alternate tail option. Snap-fit to Body
- 5-15% Infill.
- 3 Walls.
Here is a quick video showing the easiest method for snap-fitting the head onto the body: https://youtu.be/P9llZj7NBvs?t=57

This has been test printed as low as 60% with full articulation, on a well calibrated printer. The "full tail" is the part most likely to fail at small sizes, so if you go with the "nub" it can likely scale down even further. YMMV

*Good bed adhesion is a must for successful printing. If you find you are having adhesion issues, use a brim/raft or use the model variants with the custom brims built in. If the custom brim shapes aren't showing up in your slice, try lowering your Initial/First Layer Height.

***This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional SLA results. Resin print at your own risk.**


Crested Gecko - Articulated Figure

mmm-crestedgecko-body-v03r.stl

**Introducing the articulated Bunny Rabbit!!**

**_UPDATED: Multicolor 3MF files now included!_**

I'm excited to share this new design! This is 100% Print-in-place, where one body part pre-supports another as it builds upwards. No additional supports needed! Once printed, you just have to wiggle the joints to break the small contact points and free up the articulation (see video).

Please watch This Video on the best way to free up the joints after printing! Be use extra care when printing in more brittle filaments like silks. Please use 3 walls if you use a 0.4mm nozzle! 

Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.

**Printing Details**
-Print-In-Place. No additional supports needed. Several joints must be wiggled and "cracked" free in order to articulate them. Be Extra careful with brittle filaments, like silks
-Pre-supported version included for extra print stability (recommended). Support is connected to the front legs that must be removed and discarded.
-Multicolor 3MF: Compatible with PrusaSlicer and Bambu Studio
-15%-20% Infill.
-3 Walls when using a 0.4mm nozzle <--This is very important!
-Please watch This Video on the best way to free up the joints!

This model has been successfully printed down to 50%. Below that the joint function may start to become compromised. YMMV

Bunny Rabbit - Articulated Figure

BunnyRabbit__Presupported_v05R.stl

BunnyRabbit__Presupported__MultiColor_v06_prusa.3mf

BunnyRabbit__Presupported__MultiColor_v06.3mf

***UPDATED:  Multicolor 3MF files now included!***
Includes a 4 Color version for most AMS printing, as well as a5 Color version(which more closely matches my hand painted example) for those with multiple AMS units or a 5 tool head printer.

**I'm really excited to share my Articulated Bat!** It makes a really fun fidget toy on its own, but... add a #12 rubber band to each wing and it become really dynamic! (Size #12 rubber bands have been tested from 70%-100% print scale. Outside of that range, different sized bands may be required)

This model is Pre-Supported *(no added supports required).*

For a walkthrough of the model, including how to add the rubber bands, watch this video
For additional info on attaching the head, [watch this video](youtu.be/dbuXpUTG3Dc)
Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use.  You do NOT have permission to resell or redistribute those digital files in ANY way.  This includes altered or "remixed" versions of the designs.  Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

**Printing Details**
- *Body with Custom Brim:* Print-in-Place, Brim geo is built in so no need to generate one.
- *Head with Custom Support:* A small pedestal support is built into the model.  Snap it off when complete.  ***No Additional Supports Needed***
- *Multicolor 3MFs now included:*
- *4 Color:* for most AMS printing
- *5 Color:* for those with multiple AMS units or a 5 tool head printer (like the Prusa XL).
- 10-15% Infill.
- 3 Walls.

*Good bed adhesion is a must for successful printing. If the custom brim shapes aren't showing up in your slice, try lowering your Initial/First Layer Height.

Scale to your liking!  100% creates a model with a roughly 10" wingspan, so that will make it easy to scale it to your desired size. (80% = 8",  75% = 7.5", etc.)  Depending on your printer tolerances, you should be able to print close to 60% before the joint function may start to become compromised. Your mileage may vary

***This model was designed for FDM printing.  It was not designed for Resin printing, and I cannot guarantee good/functional results.  Resin print at your own risk.**

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Bat- Articulated Figure

MMM_Bat_Body_builtinBrim_v04R.stl

MMM_Bat_Head_builtinSupport_v04R.stl

snapfit

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Opossum - Articulated Figure

Ferret - Articulated Figure

Crested Gecko - Articulated Figure

Bunny Rabbit - Articulated Figure

Bat- Articulated Figure