EZPZ Keyring 1" // Keychain Ring

EZPZ_ring_1in.stl

Big Snappy Indicator Switch

BigSnappy_CaseBack.stl

Spiralized Octet Truss Modular Snap Struts

Display Only.stl

Ryobi Battery Holder

Ryobi Battery Holder V1.1.3mf

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Icosahedron Pyramids // Folding Polyhedra Pack No.1

folding-polyhedra-pack-03-icosahedron-icosahedron-pyramids.stl

6 slot needle file holder for multiboard 

file-holder-multiboard-6-slot.stl

Pop Garland

Pop Garland Display only Do Not Print.stl

Dastardly Dovetail Box (Round Magnetic)

DDround_Bottom_Magnetic.stl

EZPZ Pegboard Hook // 20mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Rhombic Triacontahedron Spore // Folding Polypanel Pack No.1

Rhombic Triacontahedron Rhombictriacontahedron. _Rhombic Triacontahedron Rhombictriacontahedron._ **Rhombic Triacontahedron Rhombictriacontahedron** ... say that three times fast!

Don't worry, this awesome shape is way easier to print than it is to pronounce. It prints flat and then folds and snaps into place. Super cool!


This is a freebie from my [Folding Polyhedra Pack No.1](https://www.myminifactory.com/object/3d-print-folding-polyhedra-pack-no-1-81865)

Rhombic Triacontahedron Rhombictriacontahedron Spore // Folding Polypanel Pack No.1

GEN2 Decor Gridfinity Magnet Drawers - LARGE

GEN2 2x1 Decor Gridfinity Magnet Double Drawer - LARGE.stl

GEN2 Decor Filament Drawer - 185 (STANDARD)

prusaslicer-filament-chip-dividers.3mf

EZPZ Pegboard Hook // 15mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

snap

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

EZPZ Keyring 1" // Keychain Ring

Big Snappy Indicator Switch

Spiralized Octet Truss Modular Snap Struts

Ryobi Battery Holder

EZPZ Pegboard Hook // 10mm Hook Type B

Icosahedron Pyramids // Folding Polyhedra Pack No.1

6 slot needle file holder for multiboard

Pop Garland

Dastardly Dovetail Box (Round Magnetic)

EZPZ Pegboard Hook // 20mm Reinforced Hook

Rhombic Triacontahedron Spore // Folding Polypanel Pack No.1

GEN2 Decor Gridfinity Magnet Drawers - LARGE

GEN2 Decor Filament Drawer - 185 (STANDARD)

EZPZ Pegboard Hook // 15mm Hook

Multiboard - Hardell Rotary Tool Holder v2

Foldable Pokeball Low Poly Box Decoration

Multiboard Snap Wall Support

Multiboard - Snap Improved

GEN2 Decor - Faceplates - Classic Series

Snap Latch Connector - For Your Projects