This is a snap-together soap tray system that is flexible and modular so that you can configure it however you need and also install it hanging from the glass wall or hooked onto the shower faucet or tap handle.  The inspiration for this is the increased use of soap bars rather than bottles for shampoo and conditioners and the resulting increased need for more soap bar storage.  But you can also use it to just hang one soap dish and or one razor holder.  

Because it is snap-together any size printer can be used to print the smaller parts and arrange them into a large assembly.  It can be assembled and disassembled to be configured however you want.  

100% printed - no hardware, fasteners, or adhesives required.  No additional print support is required.  Some print support is designed in.

Print Settings:

Material = I recommend PETG. 
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%


Shower Soap Trays

SoapDishSystem 1v00a_Soap Dish.stl

This is a snap-together modular key storage and organization system that addresses those keys we all have lying around, lost in coin trays, rattling around in a drawer, or falling into a gap somewhere.  Snap these together however suits you and then hang, hook or stand the key holder wherever convenient.   Now you know where your spare keys are and can see if one is missing.   

The key blocks contain a series of independent ribs which will hold any key inserted but allow it to be removed whenever needed.  The grip is designed to hold keys from about 1.4mm to 2.5mm in thickness.  If you want it for other sizes let me know and I will make it.

100% printed - no hardware, fasteners, or adhesives required. 

Print Settings:
I have tested this design on multiple printers using PETG and PLA.  Print settings can vary significantly between users so please note my settings and let me know if you are having difficulty.  I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues.
 
Material = I recommend PETG but any material should work.  
Nozzle = 0.4mm
Layer height = 0.2mm
Line width = 0.4mm
Wall count = 4 (1.6mm)
Infill = 40%
Ironing = OFF

All parts should be printed standing up without support.  The closet hook is a print-in-place hinged hook - the connector is printed upright but the hook itself is lying flat.  The loop end has built-in print support.  

This is related to my Magnetic Key Hider which you might also be interested in…
https://than.gs/m/1109021

See my blog for more details at… 
https://www.logicalplanet.com/




snap-together

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Shower Soap Trays

Key Blocks