The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 46 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

How to make
**(1)** Please print the following files: "Puzzle_Snake_primary_color.stl", "Puzzle_Snake_secondary_color.stl", 
I recommend adding a brim. No support is needed.
**

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!


Low Poly Snake Magnet Puzzle (No supports, no AMS)

Puzzle_Snake_primary_color.stl

3D printable model of **Messmer the Impaler Helmet from Elden Ring**– Shadow of the Erdtree DLC.

- The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ).
- All cut parts are placed on the print bed as we would print them to save you time.
- The Messmer helmet **replica is designed as a high-detail collector display piece or a highly accurate wearable cosplay** helmet.

**SIZE**
- Width 255 mm
- Length 310 mm
- Height 334 mm
- (rather smaller heads)

**THIS IS US!**
Hi! This custom model was created by **3Demon.** We're a team of 3D modeling and printing enthusiasts from Prague, Czech Republic.
With over a decade of experience, we specialize in crafting 3D-printable cosplay accessories and other unique designs. 
Explore more of our creations on Thangs and join our membership for exclusive access to our incredible library of models! 

Follow and tag us on [social media](https://3d-mon.com/links/) to stay in touch! 

Messmer the Impaler Helmet – Elden Ring

OBJ_Messmer_Helmet_3Demon.obj

**Print-In-Place, No Supports, Articulating Fidget Toy**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**
   
**Check out the latest Mimetics3D Model, [Little Lucky Rubber Ducky](https://than.gs/m/1024753)**

_A little snek who slithers so 
surveys the scene and says that though
the seasons slip swiftly away 
some other things are here to stay._ 
 

Slick the Snek is super excited to slip into the Snap-Flex collection.  

Slick was originally going to be showing off the new **Snap-Flex Twist** experimental joint, but his buddy **[Sly - Articulated Snake](https://than.gs/m/1025111)** is doing that instead.

Slick is the 20th creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

 
**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 
 
Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart
 
**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018173
**Medium Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018181
**Loose Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018185

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

This mini little monster is excited to bring a bit more love into your life

**Other Models:**
For another articulated Valentine's friend, check out this little Heart Axolotl:

**Tight Tolerance Alotl Love:**
https://than.gs/m/994472
**Medium Tolerance Alotl Love:**
https://than.gs/m/994480
**Loose Tolerance Alotl Love:**
https://than.gs/m/994484

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
**Good Bed Adhesion Required - Consider using glue stick** or a brim

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Slick - Articulated Snake Snap-Flex Fidget (Loose Joints)

Slick_articulatedSnake_Loose.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**
 
 
**Check out the latest Mimetics3D Model, [Little Lucky Rubber Ducky](https://than.gs/m/1024753)**  

_A little snek who slithers so 
surveys the scene and says that though
the seasons slip swiftly away 
some other things are here to stay._ 


Slick the Snek is super excited to slip into the Snap-Flex collection.  

Slick was originally going to be showing off the new **Snap-Flex Twist** experimental joint, but his buddy **[Sly - Articulated Snake](https://than.gs/m/1025111)** is doing that instead

Slick is the 20th creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

 
**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 
 
Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart
 
**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018173
**Medium Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018181
**Loose Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018185

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

This mini little monster is excited to bring a bit more love into your life

**Other Models:**
For another articulated Valentine's friend, check out this little Heart Axolotl:

**Tight Tolerance Alotl Love:**
https://than.gs/m/994472
**Medium Tolerance Alotl Love:**
https://than.gs/m/994480
**Loose Tolerance Alotl Love:**
https://than.gs/m/994484

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
**Good Bed Adhesion Required - Consider using glue stick** or a brim

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Slick - Articulated Snake Snap-Flex Fidget (Medium Joints)

Slick_articulatedSnake_Medium.stl

**Print-In-Place, No Supports, Articulating Fidget Toy**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints of your cool new friend.**
    
**Check out the latest Mimetics3D Model, [Little Lucky Rubber Ducky](https://than.gs/m/1024753)**

_A little snek who slithers so 
surveys the scene and says that though
the seasons slip swiftly away 
some other things are here to stay._ 


Slick the Snek is super excited to slip into the Snap-Flex collection.  

Slick was originally going to be showing off the new **Snap-Flex Twist** experimental joint, but his buddy **[Sly - Articulated Snake](https://than.gs/m/1025111)** is doing that instead

Slick is the 20th creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

 
**Snap-Flex Collection:**
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. 
 
Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

**Snap-Flex Instructions:**
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart
 
**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018173
**Medium Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018181
**Loose Tolerance Slick, Articulated Snake:**
https://than.gs/m/1018185

Please try out each to see what works best for you, and let me know which version you prefer!

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

This mini little monster is excited to bring a bit more love into your life

**Other Models:**
For another articulated Valentine's friend, check out this little Heart Axolotl:

**Tight Tolerance Alotl Love:**
https://than.gs/m/994472
**Medium Tolerance Alotl Love:**
https://than.gs/m/994480
**Loose Tolerance Alotl Love:**
https://than.gs/m/994484

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
**Good Bed Adhesion Required - Consider using glue stick** or a brim

**Suggested Material: PLA or PLA+**
**Note:** Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint.  Use silks at your own risk


**No Supports, Print-In-Place at 100% scale** 
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND **harder to pop**, so be sure to do a shorter test print to make sure it's not **TOO hard to snap into place.**

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


snake

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Low Poly Snake Magnet Puzzle (No supports, no AMS)

Messmer the Impaler Helmet – Elden Ring

Slick - Articulated Snake Snap-Flex Fidget (Loose Joints)

Slick - Articulated Snake Snap-Flex Fidget (Medium Joints)

Slick - Articulated Snake Snap-Flex Fidget (Tight Joints)