Print of KWG-03 Mach Massive from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. Horns will need to be printed 2 times, and Hammer Pins 3 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Mach Massive

Mach_Massive-Head_White.stl

Print of KWG-01 Rokusho from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. The "collar" part on the lower arms will need t be reversed when assembling left and right arms. None symmetrical parts will also be labeled with "R" or "L" in their filenames. Horns will need to be printed 2 times, Hammer Pins 3 times and Knee Rivets 4 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Rokusho

Rokusho-Head_Main_White.stl

Print of KBT-03 Kantaros from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. Leg "Plug" part will need to be printed 10 times and go into the circular slots along the shins and waist. Arm "Barrel" and "Back Barrel" parts need to be printed 3 times, one for the right arm and 2 for the left arm. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4" (100mm) tall at the top of the head and and 4.5" (120mm) at the top of the horns.

Kantaros

Kantaros-Head_Main_Yellow.stl

Print of KBT-01 Metabee from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in zip file based on what color filament they are to be printed in. Height of assembled model is approximately 4" (100mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

seperated

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mach Massive

Rokusho

Kantaros

Metabee