Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Short Bony Basilisk: 
Coming Soon
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Long Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Print-In-Place, No Supports, Articulating Fidget Toy

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


Tolerance:
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Long Bony Basilisk: 
Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

Other Models:
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling Short Bony Basilisk:

Tight Tolerance Short Bony Basilisk: Coming Soon
Medium Tolerance Short Bony Basilisk: Coming Soon
Loose Tolerance Short Bony Basilisk: Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Print Settings:
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: https://than.gs/m/933823

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Loose* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933820

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


 Sleek-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


 Sleek-Eyed Bone Snake (Medium) - Articulated Snap-Flex Fidget

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget 

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: Coming Soon
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake - Articulated Snap-Flex Fidget 

Baby Basilisk (Short) - Articulated Snap-Flex Fidget 

This baby basilisk just can't wait to be king of the serpents.  Until then, he's content to lounge about and strike a pose for you and your friends.

This flexible, articulated fidget toy incorporates the unique Mimetics 3D Snap-Flex joint, allowing each body segment to wiggle freely OR snap into a fixed position to maximize your fidget experience.

This Baby Basilisk is the first in a line of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

Be sure to check back regularly for more exciting Snap-Flex models in the future.  I'd love to hear your feedback and how we can improve this model together moving forward.

This model is only available for personal use.
If you would like to sell physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Crystal Can Cup - Twist Fidget Can Cup

Crystal Twist Can Cup Outter.stl

Red Panda - Fidget Creature

This cute little Red Panda prints in one piece with chain link legs and a springy bouncy tail.

I have printed in one colour but this would look great as a multicolour print as demonstrated in the digital renders.

As with any articulated model, the tolerances are quite tight so make sure your printer settings are calibrated.

** Commercial License **
If you subscribe to my 'Print and Sell' subscription this model is eligible for commercial use.

sensory

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Short Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Long Bony Basilisk - Articulated Snap-Flex Fidget (Tight Joints)

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Round-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Baby Basilisk (Short) - Articulated Snap-Flex Fidget

View 12 new models

View 11 new models