Fluffy Beard // Lil'Hats'N'Stuff

Fluffy Beard.stl

Ringchaku Spinning Fidget Toy

Christmas Chain V1.2 - Ringchaku Ring.stl

Polipo | Jewelry holder

polipo.stl

Emoji Ring

Heart_eyes.stl

KeyCube

Demo_KeyCube_1_2.stl

EATADICKKEYRING.stl

A keyring that says what you are thinking, use it to say what you wont. 

Giant Snapping Key Ring

A big prop key ring for all your [spooky keys](https://than.gs/m/942487)... or whatever purpose you find for it! Prints separated so there's a good friction fit, although I wouldn't trust it with my lambo keys ;)

Donut Factory Puzzle // 2x2 Twisty Marble Puzzle (24mm & 35mm inner cube)

What's better than a donut? SIX donuts!

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Donut Factory Puzzle // 2x2x2 Twisty Marble Puzzle (24mm inner cube)

Elipse Ring

A simple but interesting ring made of intersecting rings! Supports required.

3D Printer Doorbell Mount Mod

Mount Extended.stl

Fidget Print-in-Place Gyro Rings || Experiments

Little print in place gyro ring fidget toy experiment. To make it really pop, add a filament change at the middle of the model!

---

Please consider following my profile so you don't miss out on my next projects!

You can also check out my Instagram and YouTube channel for more interesting stuff!
https://www.instagram.com/jaatinen3d
https://www.youtube.com/@Jaatinen3D

Cute Octopus Keychain - Holoprops

Octopus__Keychain_Holoprops.stl

Aux Headphone Jack Plug 3.5mm

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

---

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

----

Photographed model was printed with [MatterHackers Light Blue PRO Series PLA](https://bit.ly/PRO-PLA)

Handle Bar Mustache // Lil'Hats'N'Stuff

18mmbighandlestache.stl

Follow Focus Ring

Follow_Focus_Ring_58mm.stl

The Queen Ring Holder

Introducing “The Queen Ring Holder” – a stunning and unique 3D printed ring holder designed to display your precious piece of jewelry.

My wife uses it to place her rings before doing the dishes or washing her face.

Gridfinity Center Pin Holder

2x2 Center Pin Holder.stl

Diamond

Hi friends, I created this diamond that can be scaled in size and printed both in resin, to be inserted in your jewels, and in fdm as I did. They can be used as decoration or as gems. I will be uploading an updated version in a ring shortly. 
I printed it in transparent pla to give it a realistic effect. 
Hope you like it.

ring thin v2.stl

Kawaii Sprinkle Ring Cookie - Valentine Cookies

Ring Cookie Top.stl

ring

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 10 new models

Ringchaku Spinning Fidget Toy

Polipo | Jewelry holder

Emoji Ring

KeyCube

EATADICKKEYRING.stl

View 17 new models

View 78 new models

View 18 new models

View 21 new models

Fidget Print-in-Place Gyro Rings || Experiments

View 46 new models

View 66 new models

View 111 new models

Follow Focus Ring

The Queen Ring Holder

Gridfinity Center Pin Holder

Diamond

ring thin v2.stl

Kawaii Sprinkle Ring Cookie - Valentine Cookies