Low Poly Eevee | Pokemon 3D Model

**Low Poly Eevee Model
**
I present my first go at a Low Poly Pokemon! I plan to do many other Pokemon (specifically the originals) and figured who better to start off with than Eevee.

Dimensions: 50mm (X) x 30mm (Y) x 50mm (Z)
Approximate Print Time: 1.5-2 hours depending on settings

I decided to create my own series of Low Poly Pokemon to add to the already amazing selection already available by other designers.

This is somewhat of a start to an ongoing exercise for me to improve with Low Poly modeling and mesh manipulation in Blender, but my overall goal is to capture unique poses and positions with as many Pokemon as I can!

Feel free to give me a follow to catch the next releases, and tag me on Instagram @thinair3dprints. I would love to see your print!

This file is uploaded with a non-commercial license, but if you wish to sell this or my other designs you can join my Patreon!

Patreon.com/thinair3d

**3D Printer Setting Used:
**
I suggest using whatever standard settings work best for you for simple decorative pieces, the model prints very easily. Here are the particular settings I used:

Nozzle Size: 0.6
Layer Height: 0.2
Infill: 5% (Adaptive Cubic)
Perimeters: 2
Support: None

Scaling: I would suggest only scaling up, but not scaling down any further, otherwise you may have issues with the ears being too thin.

You can lower your Layer Height to get better quality than the 0.2 LH I used!

Low Poly Jolteon | Pokemon 3D Model

Low Poly Jolteon Model

This is my second attempt at a Low Poly Pokemon! I created Eevee first, and have plans to create as many Pokemon as I can over the course of time.

This model is scaled as small as I wanted to print it (FDM), but can be scaled as you please (just be careful going smaller)! I also have a planter version of this model available to my Patreon supporters.

This is somewhat of a start to an ongoing exercise for me to improve with Low Poly modeling and mesh manipulation in Blender, but my overall goal is to capture unique poses and positions with as many Pokemon as I can!

Feel free to give me a follow to catch the next releases, and tag me on Instagram @thinair3dprints. I would love to see your print!

This file is uploaded with a non-commercial license, but if you wish to sell this or my other designs you can join my Patreon!

Patreon.com/thinair3d

3d Printing Setting used:
I suggest using whatever standard settings work best for you for simple decorative pieces, the model prints very easily. Here are the particular settings I used:

Nozzle Size: 0.6
Layer Height: 0.28
Infill: 5% (Adaptive Cubic)
Perimeters: 2
Support: None

Scaling: I would suggest only scaling up, but not scaling down any further, otherwise you may have issues with the ears being too thin.

You can lower your Layer Height to get better quality than the 0.28 LH I used!

pokemon 3d

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Low Poly Eevee | Pokemon 3D Model

Low Poly Jolteon | Pokemon 3D Model