Dragon plant climber

Yellow Front Loader with Movements

mad science.stl

Magnetic Corner Print-in-Place Spiderweb Halloween Decoration

CornerWeb_12x4_200.stl

Fixum Dude Motors PiP Concrete Truck

Print in place concrete truck with rotating wheels and mixing drum. 

Introducing the FDM (Fixum Dude Motors) print in place concrete truck. The wheels and the concrete mixing drum rotate right off the build plate.

Prints on its side without supports. Sample printed in Hatchbox Blue PLA on the Prusa MINI+ in .25LH Draft mode, with 4 top/bottom layers, 3 perimeters and 10% gyroid infill. 

Yellow Pickup Crane Version 2

Box with a lack

stronger hing for smaller box.stl

Strong paracord hook

One can learn to tie the Prusik (not related to Prusa) knot or use my ingenious clamps for securing objects. I have created two versions of the clamps:

Outside Hook - This version is simple to print and is my personal favorite.
Inside Hook - This version is slightly more stylish and features a protected inner hook. This design reduces the risk of injuries, especially for children. However, it is not as strong as the outside hook version and may be a bit more challenging to print.
Both versions are designed to accommodate three common paracord diameters:

Cord 550: 4mm (according to specifications)
Cord 550: 3.8mm (dimensions of some brands)
Cord 750: 5mm (also commonly used for various other ropes)
You can scale the clamps proportionally to ensure a proper fit for your specific cord.

These clamps are much stronger than typical clothespins. Their strength doesn't rely on springs but rather on the design of the side lips. When under stress, the cord is prevented from slipping through the lips due to their orientation to the pulling force:


When I tested them, they were able to hold over 20 kg when printed in PET-G. The actual strength may vary depending on the material used and the specific dimensions of the paracord.

Printing Instructions:

Materials: ASA, PET-G (Note: PLA can degrade over time and the clamp is intended for outdoor use)
Print orientation: On its side, as shown in the attached picture. For increased strength, the print lines should follow the spring mechanism.
Wall count: Use at least 4 walls for added durability.
Brim: Optional but can be useful to improve adhesion.
Supports: No supports are needed.
 

Enjoy

550 4mm Outside.stl

Pencil Pencil Holder

Pencil Pencil Holder Top.STL

Yet another flux Dispenser

Candy Propeller Plane

Spiral Pencil Holder.stl

A spiral pencil holder that you can hook keychains onto the horizontal circles.

Square Pencil/Pen Cup.stl

PENCIL/PEN CUP.stl

Customizable Filament Sample

This is a Customizable Filament Sample, which can be modified in Autodesk Fusion 360. Fits well Filament Sample Box created by Extrutim.

---

**Modification instructions**

1. Open .f3d file in Fusion 360.
1. Edit Sketch - Text.
1. Edit created text.
1. Enter desired information such as: brand, material and color.
1. Finish sketch.
1. Export created body as a mesh.

---

**Recommended print settings**

- layer height: 0.1 mm
- solid layers: 10
- fill angle: 0°
- seam position: **aligned**

Small & simple desk organizer - Print in place

Free for the first week only! Organize your desk or fire up your 3D Printing business with an easy profit piece*

*For commercial license subscribe to thangs membership

Easy print without supports, make sure to like and follow!

Playstation 5 Crystal Dock - Disc Edition - No support

Crystal_Dock_PS5-front_Holoprops.stl

3/16" Shelf Support Peg

LX-810 platen knob

Printer platen knob for an Epson LX-810 dot matrix printer. It should work with any printer using a 7 mm hex shaft for the knob mount.

HP G2 Mini Drive Mounts

office supplies

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Dragon plant climber

Yellow Front Loader with Movements

mad science.stl

Magnetic Corner Print-in-Place Spiderweb Halloween Decoration

Fixum Dude Motors PiP Concrete Truck

Yellow Pickup Crane Version 2

Box with a lack

Strong paracord hook

Pencil Pencil Holder

Yet another flux Dispenser

Candy Propeller Plane

Spiral Pencil Holder.stl

Square Pencil/Pen Cup.stl

PENCIL/PEN CUP.stl

Customizable Filament Sample

View 15 new models

View 46 new models

3/16" Shelf Support Peg

LX-810 platen knob

HP G2 Mini Drive Mounts