Unleash the power of Donatello's iconic Bo Staff from Teenage Mutant Ninja Turtles! This life-sized 1:1 scale replica is a meticulously crafted homage to the iconic weapon wielded by Donatello.

Build Video:
https://youtu.be/QTSDISMl-ms

Recomended Print settings:
infill: 10%
Layer Height 0.16mm
support: Yes
Brim: depends on your printer adhersion(i did use brim)

Scale: 1:1 (Life-sized replica)
Length:200cm

Donatello's Bo Staff - Teenage Mutant Ninja Turtle - 1:1 Scale

Donatello Bo Staff.stl

Unleash the power of Leonardo's iconic katana from Teenage Mutant Ninja Turtles! This life-sized 1:1 scale replica is a meticulously crafted homage to the iconic weapon wielded by Leonardo.

Build Video:
https://youtu.be/Y7V0i99ZJZo

there 2 types of blades , there is the edge blade and a rounded blade, as well as a wall mount for each type.

Recomended Print settings: 
infill: 10%
Layer Height 0.16mm
support: Yes
Brim: depends on your printer adhersion(i did use brim for handel wrap)

Scale: 1:1 (Life-sized replica)
Height:4.5cm
Length:76cm
Width:5cm

Leonardo Katana - Teenage Mutant Ninja Turtle - 1:1 Scale

Leonardo Katana TMNT.stl

3D model description
Step into the shadows with this exclusive ANBU Mask Collection – six iconic designs inspired by the mysterious operatives from the Naruto universe.

Whether for cosplay, display, or collectors of anime-inspired props, these masks bring the ANBU spirit to life.
Each model is optimized for FDM 3D printing with easy scaling to fit different head sizes.

⚙️ Recommended Print Settings

File format: STL (each mask separate)
Printer volume: 220×220×250 mm or larger recommended
Layer height: 0.2 mm (0.12 mm for high detail)
Infill: 10–15% (higher for durability)
Supports: Required (mainly for eye holes & curved surfaces)
Wall thickness: 2–3 perimeters for strength
Material: PLA / PETG (PLA recommended for easy finishing)

🛠️ Manufacturing & Post-Processing Instructions

Scale the mask to fit your head (usually 90–100% for adults, 80–85% for kids).
Print flat on the back surface for best support efficiency.
After printing, sand with 220–400 grit to smooth out layer lines.
Apply primer filler before painting.
Paint base coat white → then add red details with acrylic or spray paint.
Seal with a clear matte or gloss varnish.
Attach with elastic straps or embed magnets depending on cosplay setup.

ANBU Mask Pack 2 – FOX, BLOODFANG, SPIRALFANG, RAM, SPIRAL, ONI and CUBE

Anbu Spiral Fang.stl

3D model description
Step into the shadows with this exclusive ANBU Mask Collection – six iconic designs inspired by the mysterious operatives from the Naruto universe.

This bundle includes:

Viper – sleek fangs striking down the mask.
Claw – diagonal slashes across the eyes.
Fang – twin vertical streaks for a sharp, fierce look.
Cat – feline elegance, a true hunter’s mask.
Halfmoon – mysterious one-eyed crescent design.
Whisker – playful yet deadly, with sharp whisker marks.

Whether for cosplay, display, or collectors of anime-inspired props, these masks bring the ANBU spirit to life.
Each model is optimized for FDM 3D printing with easy scaling to fit different head sizes.

⚙️ Recommended Print Settings

File format: STL (each mask separate)
Printer volume: 220×220×250 mm or larger recommended
Layer height: 0.2 mm (0.12 mm for high detail)
Infill: 10–15% (higher for durability)
Supports: Required (mainly for eye holes & curved surfaces)
Wall thickness: 2–3 perimeters for strength
Material: PLA / PETG (PLA recommended for easy finishing)

🛠️ Manufacturing & Post-Processing Instructions

Scale the mask to fit your head (usually 90–100% for adults, 80–85% for kids).
Print flat on the back surface for best support efficiency.
After printing, sand with 220–400 grit to smooth out layer lines.
Apply primer filler before painting.
Paint base coat white → then add red details with acrylic or spray paint.
Seal with a clear matte or gloss varnish.
Attach with elastic straps or embed magnets depending on cosplay setup.

ANBU Mask Pack 1 – Viper, Claw, Fang, Cat, Halfmoon, Whisker

Anbu Claw STL.stl

Discover 3D model Leo - TMNT - Fan Art on Thangs.com, which brings your favorite pop culture character to reality. This meticulously designed model falls under the "Pop Culture/All" category and is a tribute to Leonardo, the iconic character from the Teenage Mutant Ninja Turtles series. Ninja Turtles series. With the attention to detail visible in the images, you can experience resonant imagery of Leo's stunning body structure, the distinguishing shell, and his trademark dual katanas. This 3D model manifests craftsmanship and is a must-own for pop culture enthusiasts and TMNT lovers. Prepare to be engrossed by this sublime representation of Leonardo, every detail of which reflects the beloved character. Keep looking for more such exceptional and intricate 3D modeling on Thangs.com.

If you like my work, find more here - https://www.myminifactory.com/users/printedobsession
If you want to support my work, consider joining Patreon - https://www.patreon.com/printedobsession
Want to know more about my process? I have tutorials on YouTube - https://www.youtube.com/c/PrintedObsession
Check out my website - https://www.printedobsession.co.uk
CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Leo - TMNT - Fan Art

Leo.stl

Unleash the power of Raphael's iconic Sai from Teenage Mutant Ninja Turtles! This life-sized 1:1 scale replica is a meticulously crafted homage to the iconic weapon wielded by Raphael.

Build Video:
https://youtu.be/iuajCoB0z6M

There 2 types of blades , there is the long blade and a short blade

Recomended Print settings:
infill: 10%
Layer Height 0.16mm
support: Yes
Brim: depends on your printer adhersion(i did use brim for handel wrap)

Scale: 1:1 (Life-sized replica)
Height:3.5cm
Length:42cm(short blade) 57cm(long blade)
Width:10cm

ninja

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Donatello's Bo Staff - Teenage Mutant Ninja Turtle - 1:1 Scale

Leonardo Katana - Teenage Mutant Ninja Turtle - 1:1 Scale

ANBU Mask Pack 2 – FOX, BLOODFANG, SPIRALFANG, RAM, SPIRAL, ONI and CUBE

ANBU Mask Pack 1 – Viper, Claw, Fang, Cat, Halfmoon, Whisker

Leo - TMNT - Fan Art

Raphael's Sai - Teenage Mutant Ninja Turtle - 1:1 Scale