Trunk Pot (Prę Supported)

Trunk_Pot.stl

Gaia- Mother Earth Sculpt

Gaia- Mother Earth.3mf

Earth Lithopanes

This is a Earth Lithopane for you to remix.
There are different sizes 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 225, mm and 250 mm on there.
It's designed for an FDM printer with a 0.4 mm nozzle. You may be able to print this with bigger nozzles, if you use the layer height and width i recommend.
Print settings:
Domes are quite hard to print. I never printed this as a whole, I always cut it into pieces first.
Layer Height 0.2 mm
Layer Width 0.4 mm
No supports.
I always decrease the speed at the top of the dome (when the bridging occurs) to 50%. You can do this in Cura using the extension post-processing.
I use standard white PLA for these. If you are unsure if your filament works, just shine through the walls of the print with your phone lamp at something like 10% print completion. You should see the Lithophane effect.

Remember to add me when you remix this, I'm eager to see what you do with this. I made some ready to print lamps with this, you can check them out at my site.

If you used this, please consider buying me a coffee at https://www.buymeacoffee.com/Ri0m0

Earth Desk Lamp

Hey!
This is my Earth Desk Lamp.

You will need a lamp socket, and a bulb. I like to use a Multi color LED. These parts will only work with this Lamp Socket from Ebay. (it has an EU Plug)

EU Plug:

https://ebay.us/ASMco5

Bulb:

https://ebay.us/yB4Acp

You Support me by using these links!
US version coming soon!

Print Settings:
You only need to print the numbered files.
Earth: Use a 0.4 mm Nozzle! or a line height of 0.2 mm and a width of 0.4 mm.
Domes are quite hard to print. I always slow down the layers at the top to 50% print speed (at layer 670).
Use 100% infill with concentric infill, or set your wall count to something ridiculous like 40.
Any Basic white PLA will do the job just fine. I used Sunlu White PLA+ if that helps. Don't try Matte or glitter stuff, it will not work.
No supports!

Holder:
Print with supports.

That's it. Enjoy your Lamp. :D If you made one, please consider Buying me a coffee at https://www.buymeacoffee.com/Ri0m0
I'm a poor student in need of filament.

I also have other lamps on my Profile (or they are coming soon!) check them out.
Don't be afraid to ask if something doesn't work, or you have suggestions.

Please note, this is provided as a non-commercial license.

mother earth

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trunk Pot (Prę Supported)

Gaia- Mother Earth Sculpt

View 15 new models

Earth Desk Lamp