Franken-Stein Flip Top Can Coozie

Frankenstein.Head.011.stl

Demon Mask -"Chomp" (Sculptober Day 17)

Demon Mask-Chomp.stl

Tessy and Chipper | Lock Ness Monster

In the depths where the mysteries reside,
Tessy, the Loch Ness youth did glide.
With a serpentine grace, through waters, she weaved,
A world of wonder, one might believe.

Among rocks and seaweed, where shadows did creep,
She met Chipper, the octopus, from a cleft so deep.
Timid and wary, his eyes did confess,
Yet bravery arose, amidst the distress.

One tentacle outstretched, a gesture so slight,
In the dance of the deep, under dim moonlight.
Suspended in seaweed, Tessy did seem,
Like a dreamer caught up in a deep-sea dream.

This model was created LIVE on INSPYR3D Stories LIVE Stream. Streaming on youtube and twitch. 

[Watch on Youtube](https://www.youtube.com/watch?v=t8AwuVgHwXA)

[Watch on Twitch](https://www.twitch.tv/inspyr3d)

Tessy and Chipper

poopman

eight-shaped tailed two headed pangolin and Re-edit

a eight-shaped tailed two headed pangolin toy for 3d printing

Large Carnivorous Plant

CarnivorousPlant_50_v01.stl

Huge Carnivorous Plant

CarnivorousPlant_80_v01.stl

Trash Eater - Otyugh

Garbage_Monster_01.stl

Cute Monsters (Ankle Biters)

Ankle_Biter_01.stl

Universal Monsters Coasters MMU/AMS - Wolfman

New MMU/AMS version of the original cute Universal Monster Coasters.

Cuten up your Halloween table with these cute monster coasters.

Wolfy will make sure you have a howling good time no matter what beverage you're drinking!

Designed for black (filament 1), white (filament 2) and brown or face color of your choice (filament 3).

0.2mm layer height
prints without supports
colorized with black, white, brown

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Loose Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Medium Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940296

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Medium Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Universal Monsters Coasters - Bride Of Frankenstein

Cuten up your Halloween table with these cute monster coasters.

Not even monsters should be alone, so we've created this cute Bride of Frankenstein coaster to go along with the set.

Multi-color Printing Tips (for 0.2 layer heights):
I started with white, then switched to black at 2.2mm, then switched to purple at 3.4mm

Example printed in Hatch box white PLA, Hatchbox Black PLA, & PolyMaker PolyTerra Lavender PLA on the Bambu X1C

Dragon Head - Bust 

Sandworm (Beetlejuice) -Little Big Head

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***
Check out my whole "Little Big Head" series!
Including [Barbara](https://than.gs/m/926955) and [Adam](https://than.gs/m/928950)!!!

Remix of Universal Monster Coasters - Creature from the Black Lagoon into a keychain

Cute Creature from the Black Lagoon Coaster designed for filament swaps.

Cuten up your Halloween table with these cute Universal Monsters Coasters.

Creatch just wants to be loved just like the rest of us. And he's great at mopping floors!

Multi-color Printing Tips (for 0.2 layer heights):
I started with white, then switched to black at 2.2mm, then switched to green at 3.4mm

Example printed in Hatch box white PLA, Hatchbox Black PLA, & Extrude Signal Green PLA on the Prusa MINI+

monster

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Franken-Stein Flip Top Can Coozie

Demon Mask -"Chomp" (Sculptober Day 17)

Tessy and Chipper | Lock Ness Monster

poopman

eight-shaped tailed two headed pangolin and Re-edit

Large Carnivorous Plant

Huge Carnivorous Plant

Trash Eater - Otyugh

Cute Monsters (Ankle Biters)

View 12 new models

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Universal Monsters Coasters - Bride Of Frankenstein

Dragon Head - Bust

Sandworm (Beetlejuice) -Little Big Head

Remix of Universal Monster Coasters - Creature from the Black Lagoon into a keychain

View 78 new models

Universal Monster Coasters - Creature from the Black Lagoon

Little Monster Zana

A Walk in the Graveyard Diorama