Ogre - Tabletop Miniature

Ogre_01.stl

Minotaur - Tabletop Miniature

Minotaur_01.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Medium Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Sprout, Baby Wood Dragon - Articulated Dragon Snap-Flex Fidget (Tight Joints)

Sprout_tightJoints.stl

bracken

I mean. It is what it is. 
It's the flower man from Lethal Company.
I used terrible blurry screenshots and the power of love as reference.

Sly - Articulated Snake, Snap-Flex TWIST

Sly_ArticulatedSnake_SnapFlexTwist.stl

Little Lucky Rubber Ducky - St. Patricks Day Duck

LittleLuckyRubberDucky_StPatricksDuck.stl

Bulbasaur - Valentines - Pokemon - Fan Art

bulbasaw - Valentines.stl

Slick - Articulated Snake Snap-Flex Fidget (Loose Joints)

Slick_articulatedSnake_Loose.stl

Urban Monster - Labubu Inspired

S-Urban Monster - Labubu Inspired.3mf

Wraith - Tabletop Miniature

Base_Flying.stl

Crystal Dragon

Crystal Dragon V2.3mf

Snick - Articulated Snake Snap-Flex Fidget (Tight Joints)

SmoothSnake_ArticulatedSnake_Tight.stl

St Patty's Flexi Gnome - Articulated Fidget Toy

StPatricks_StPattysGnome.stl

VENOM PUMPKIN WITH TENTACLE / HALLOWEENDECOR / HOMEDECOR

VENOM-PUMPKIN_WITH-TENTACLES.stl

Hook Horror - Tabletop Miniature

Hook_Horror_02_32mm.stl

Alotl Love, Little Heart Axolotl - Articulated Snap-Flex Fidget Toy (Loose Joints)

AlotLove_LooseJoint.stl

Mimic can holder

Mimic can holder.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

**Loose Tolerance**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the **Witch Hat Snappy Cat**.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940295
**Medium Tolerance Witch Hat Snappy Cat:**
https://than.gs/m/940296

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Chonky Dragon

ChonkyDragon.stl

monster

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ogre - Tabletop Miniature

Minotaur - Tabletop Miniature

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Sprout, Baby Wood Dragon - Articulated Dragon Snap-Flex Fidget (Tight Joints)

bracken

Sly - Articulated Snake, Snap-Flex TWIST

Little Lucky Rubber Ducky - St. Patricks Day Duck

Bulbasaur - Valentines - Pokemon - Fan Art

Slick - Articulated Snake Snap-Flex Fidget (Loose Joints)

Urban Monster - Labubu Inspired

Wraith - Tabletop Miniature

Crystal Dragon

Snick - Articulated Snake Snap-Flex Fidget (Tight Joints)

St Patty's Flexi Gnome - Articulated Fidget Toy

VENOM PUMPKIN WITH TENTACLE / HALLOWEENDECOR / HOMEDECOR

Hook Horror - Tabletop Miniature

Alotl Love, Little Heart Axolotl - Articulated Snap-Flex Fidget Toy (Loose Joints)

Mimic can holder

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Loose Joints)

Chonky Dragon