**Introducing the Rat!** This articulated rodent prints in 3 parts and snap-fits together.  The head has a small pre-support that will have to be removed before it can be snapped into the body.  No slicer supports needed!

Here is a [**video demo**](https://youtu.be/h3b6mKVS7qw) of the model!

*Includes a multicolor 3MF that works in both Bambu Studio and PrusaSlicer

Please, share photos of your makes! I would love to see them!


**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my **[Patreon](https://www.patreon.com/matmire_makes)** or **[MMF Tribe](https://www.myminifactory.com/users/MatMireMakes?show=tribe)**.

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

**Printing Details**
-   **Head:** Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed.
-   **Body:** Print-In-Place. Snap-Fit to Head. No supports needed.
-   **Tail:** Print-In-Place. Snap-Fit to body. No supports needed.
-   **Multicolor 3MF:** includes a multicolor 3MF that works in both Bambu Studio and PrusaSlicer
-   5%-15% Infill.
-   3 Walls.
Here's a quick [Video](https://youtu.be/h3b6mKVS7qw) of the head and tail assembly.

Rat - Articulated Figure

MMM_Rat_Multicolor_v02_bambuEtc.3mf

MMM_Rat_Multicolor_v02_prusa.3mf

**Introducing my new Platypus design!** A true oddity of the natural world. The more you learn about these funny fellas, the weirder they get. My kind of critter.

It's fully print-in-place, and features a few mechanisms to allow the head to either move freely or pop into a slot that holds it in an upward looking pose. Here's a quick [demo video](https://youtu.be/SYsawWpqvkY) of how it works!

Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!

I hope you like it!

Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of MatMire Makes designs, you must obtain authorization by joining the "Merchant" Tier of either my [Patreon](https://www.patreon.com/matmire_makes) or [MMF Tribe](https://tinyurl.com/ye3tx7kb)

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.

Printing Details

-   **Platypus**: Print-In-Place, No additional support needed.
-   **3MF**: includes multicolor 3MF file (compatible with both PrusaSlicer and Bambu Studio)
-   5%-15% Infill.
-   3 Walls.

Head locking mechanism allows you to pose it looking up. Here's a quick [demo video](https://youtu.be/7H31dzezt44) of how it works!

This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.

Platypus - Articulated Figure

MMM_Platypus_Multicolor_v01_bambuEtc.3mf

MMM_Platypus_Multicolor_v01_prusa.3mf

***Updated!...*** Multicolor 3mf file now included!

**Introducing the Ghost Crab!!** I've been wanting to make a crab for quite some time, so it was a lot of fun to design this fella.

This one is a little unique in that most of the joints are designed to hold their posing. The legs do wiggle and flop when in their print position, but twist them around into the standing position and the joints tighten, allowing the legs to hold the body up in many fun poses!

I created a [Demo Video](https://studio.youtube.com/video/YmVHAsbuGNE/edit) of how all the joints work, and how you can replace the legs if you want!

Please, share photos of your makes! I would love to see them!

**PLEASE READ:**
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.

To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe ([myminifactory.com/users/MatMireMakes?show=tribe](https://www.myminifactory.com/users/MatMireMakes?show=tribe))

If you like this design, please checkout my Socials and give a follow. More designs are coming soon!

**Printing Details**
**"GhostCrab_Full" A or B:** These versions are print-in place and ready to go, all in one STL/print.
- The"A" version has standard sized tolerances in the Leg socket joint
- The "B" version has slightly wider tolerances, in case your machine/filament prints with tolerances that are too tight.

**"Separated Parts" folder (Optional):** In this folder you will find the Body and all of the Legs separated out into individual STL files that will allow you to:
- set the legs to print in another color/filament.
- make fine scale adjustments to the legs for better tolerances.
- print individual legs to replace failed parts.

**"Tolerance_Test_Print" (Optional):** [Video Demo](https://youtu.be/0amDkrg1N9c)
- A very fast print with both "A" and "B" leg tolerances. Print it to help choose which works best for you!

- **Multicolor 3MFs:** (Compatible with PrusaSlicer, Bambu Studio, Orca based slicers)
-3 Walls (when using 0.4 mm nozzle. 2 Walls with 0.6mm)\
-10-15% infill (I like Gyroid)

This should generally scale down to about 70% with full articulation, on a well calibrated printer. YMMV

**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*

matsmire

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Rat - Articulated Figure

Platypus - Articulated Figure

Ghost Crab - Articulated Figure