**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Flustra (Fluss-truh) Pendant Light brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the ripples underneath evoke a more dynamic sense of motion.


**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**



**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

The Flustra - Vase Mode Pendant Light (Large)_Bambu by Mimetics3D.3mf

The Tsugite Cube has reached unprecedented extremities with this 4x4 version of the confounding puzzle cube series. 

Join all 31 pieces in the correct order and orientation to create a continuous loop in the form of a solid 4x4 cube. The Kawai Tsugite joint connects in 3 different orientations, so this isn't your average packing puzzle! 

As a helpful hint, no like colors will touch when printed in 6 colors... Consider that a part of the puzzle since it's already difficult enough, but if you feel like an even more extreme challenge, you can print it all in one color.

This download also includes a flashy Special Edition 4x4 Stand, along with the default cube stand. There is also an STL of the entire assembled puzzle if you need help solving, or check out my full [Solution Video on YouTube](https://youtu.be/yZwMSwlxIy0).

---

**_Printing Guidelines_**

Print at 0.16mm layer height with 3 shells and 0% infill, 5 top and 5 bottom solid layers. No supports required! The puzzle parts are divided into 6 groups, where no like colors will be touching for the solved puzzle. You can split the models into parts within your slicer if you wish to print/color separately, or need to rearrange parts for whatever reason.

The SE_Stand is a somewhat difficult print without supports. I used fuzzy skin with 0.2mm thickness and point distance to hide any wobble artifacts near the top and as a general aesthetic. I printed with 4 shells, 0 top layers, and 15% lightning infill. You may also need a brim or minimal supports to improve printability. The basic stand is much easier to print!

math

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

4x4 Tsugite Cube Puzzle