skeleton wolverine keychain

skeleton-wolverine-keychain-TheMakersLayer.3mf

Deadpool & Wolverine Best Friends Heart Necklace/Keychain

Wolverine Split Heart Necklace Layer Color Change Frikarte3D.stl

Lucky remix of Thor's Hammer Mk.II Keychain

shamrocks.stl

Ms Marvel Keychain

This is a keychain inspired by the Ms Marvel TV Series Logo. It's a simple design with the logo centered in the middle of the keychain.

You can find more keychains here: [Keychains Pack](https://cults3d.com/en/design-collections/Frikarte3D/keychains)

Ms. Marvel is an American television miniseries created by Bisha K. Ali for the streaming service Disney+, based on the Marvel Comics featuring the character Kamala Khan / Ms. Marvel. It is the seventh television series in the Marvel Cinematic Universe (MCU) produced by Marvel Studios, sharing continuity with the films of the franchise. It follows Kamala Khan, a 16-year-old fangirl of the Avengers, particularly Carol Danvers / Captain Marvel, who struggles to fit in until she gains her own powers. Ali serves as head writer with Adil & Bilall (Adil El Arbi and Bilall Fallah) leading the directing team.

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...
You can print it in a single color or do a color change after layer 7 or 1.4mm, for my taste it looks much better in two colors.
I recommend using:
[Yellow PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Purple PLA](https://s.click.aliexpress.com/e/_AsyiSZ)

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

She Hulk Keychain

This is a keychain inspired by the She-Hulk: Attorney at Law Logo. It's a simple design with the logo centered in the middle of the keychain.

You can find more keychains here: [Keychains Pack](https://cults3d.com/en/design-collections/Frikarte3D/keychains)

She-Hulk: Attorney at Law is an upcoming American television series created by Jessica Gao for the streaming service Disney+, based on the Marvel Comics character She-Hulk. It is intended to be the eighth television series in the Marvel Cinematic Universe (MCU) produced by Marvel Studios, sharing continuity with the films of the franchise. It follows Jennifer Walters, a lawyer specializing in cases involving superhumans, who also becomes the green superhero She-Hulk. Gao serves as head writer with Kat Coiro leading the directing team.

Tatiana Maslany stars as Jennifer Walters / She-Hulk, alongside Jameela Jamil, Josh Segarra, Ginger Gonzaga, Jon Bass, Renée Elise Goldsberry, Tim Roth, Mark Ruffalo, and Benedict Wong. She-Hulk was announced in August 2019, with Gao hired in November. Coiro joined to direct multiple episodes in September 2020, and Maslany was cast. By December, Roth and Ruffalo had joined the cast and Anu Valia was also set to direct. Filming began in mid-April 2021 in Los Angeles and Atlanta, Georgia, and lasted until mid-August.

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...
You can print it in a single color or do a color change after layer 7 or 1.4mm, for my taste it looks much better in two colors.
I recommend using:
[Sunlu Purple PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Sunlu Green PLA](https://s.click.aliexpress.com/e/_AsyiSZ)

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Marvel Keychain Round

This is a keychain inspired by the MARVEL logo. It is the typical emblem of the company: exchanging the red rectangle for the background of the keychain and with the usual white wordmark written on it.

Marvel's first logo, created in 1939, reflected the company's original name, Timely Comics, and was placed within a shield shape. The 1951 logo reflected the company's name change to Atlas Comics.

Marvel's visual identity was established in the early 2000s after its iconic red and white logo was introduced. For the Marvel Studios brand, the logo was slightly redesigned, adding the second part of the nameplate. Over the years the motto was changed and placed on and off the main insignia, although its rectangular red emblem with white lettering has never been changed since.

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...

You can print it in a single color or do a color change after layer 7 or 1.4mm, for my taste it looks much better in two colors.
I recommend using:
[Sunlu Black PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Sunlu Silk Silver PLA](https://s.click.aliexpress.com/e/_AsyiSZ)

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Iron Man Keychain

This is a keychain inspired by the Iron Man Helmet Logo. It's a simple design with the logo centered in the middle of the keychain.

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...
You can print it in a single color or do a color changes, for my taste it looks much better in three colors.
I recommend using:
[White PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Red PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Yellow PLA](https://s.click.aliexpress.com/e/_AsyiSZ)

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Thor's Hammer Keychain

This is a keychain inspired by the Thor's Hammer Logo. It's a simple design with the logo centered in the middle of the keychain.

Mjølnir is a powerful enchanted war-hammer forged by the Dwarves for the Asgardian Royal Family, and was used by Odin before he passed it down to Hela and then Thor. The hammer was used extensively by Thor as his primary weapon until it was destroyed by Hela in 2017. The broken pieces were eventually made into a tourist attraction in New Asgard.

Thor Odinson is the Asgardian God of Thunder, the former king of Asgard and New Asgard, and a founding member of the Avengers. When his irresponsible and impetuous behavior reignited an ancient war between Asgard and Jotunheim, Thor was denied the right to become king, stripped of his power and hammer Mjølnir, and banished to Earth by Odin. While exiled on Earth, Thor learned humility, finding love with Jane Foster, and helped save his new friends from the Destroyer sent by Loki. Due to his selfless act of sacrifice, Thor redeemed himself in his father's eyes and was granted his power once more, which he then used to defeat Loki's schemes of genocide.

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...
You can print it in a single color or do a color change after layer 7 or 1.4mm, for my taste it looks much better in two colors.
I recommend using:
[Black PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[White PLA](https://s.click.aliexpress.com/e/_AsyiSZ)

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Hulk Hand Keychain

This is a keychain inspired by the Hulk Hand Logo. It's a simple design with the logo centered in the middle of the keychain.

Doctor Robert Bruce Banner, M.D., Ph.D., is a renowned scientist and a founding member of the Avengers. Highly respected for his work in biochemistry, nuclear physics and gamma radiation, Banner was commissioned by Thaddeus Ross to recreate the Super Soldier Serum that created Captain America. However, Ross elected not to inform Banner what he was creating. During the experiment, Banner was exposed to dangerous levels of gamma radiation (rather than vita radiation). As a result, the mild-mannered scientist found that when angered, provoked, or excited, his body and brain would transform into a huge, rage-fueled, primitive-minded creature known as Hulk.

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...
You can print it in a single color or do a color change after layer 7 or 1.4mm, for my taste it looks much better in two colors.
I recommend using:
[Green PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Purple PLA](https://s.click.aliexpress.com/e/_AsyiSZ)

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Captain America Keychain

This is a keychain inspired by the Captain America Comic Logo. It's a simple design with the logo centered in the middle of the keychain.

Steven Grant Rogers, more commonly known as Steve Rogers, is a fictional character primarily portrayed by Chris Evans in the Marvel Cinematic Universe (MCU) media franchise—based on the Marvel Comics character of the same name—commonly known by his alias, Captain America. Rogers is depicted as a World War II-era super soldier who was given a serum that provided him with superhuman abilities including enhanced durability, strength, and athleticism. During his fight against the Nazi secret organization Hydra, he became frozen in the Arctic for nearly seventy years until being revived in the 21st century. Rogers becomes a founding member and leader of the Avengers. Following internal conflict within the Avengers as a result of the Sokovia Accords and Thanos initiating the Blip, Rogers leads the team on a final mission and they successfully restore trillions of lives across the universe and defeat Thanos. After returning the Infinity Stones to their original timelines, he remains in the 1940s with his lost love Peggy Carter; they marry and Rogers lives a full life. Upon his retirement, Rogers chooses Sam Wilson to be his successor and passes his shield and the title of Captain America onto him.

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...
You can print it in a single color or do a color change after layer 7, 12 and 17 or 1.4, 2 and 2.4 mm, for my taste it looks much better in two colors.
I recommend using:
[White PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Red PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Blue PLA](https://s.click.aliexpress.com/e/_AsyiSZ)

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Black Widow Keychain

This is a keychain inspired by the Black Widow Logo. It's a simple design with the logo centered in the middle of the keychain.

Natalia Alianovna Romanov (Russian: Наталья Альяновна Романов), more commonly known as Natasha Romanoff (Russian: Наташа Романова), is a fictional character primarily portrayed by Scarlett Johansson in the Marvel Cinematic Universe (MCU) media franchise—based on the Marvel Comics character of the same name—sometimes known by her alias, Black Widow. Romanoff is depicted as an expert spy and hand-to-hand combatant, trained in the Red Room from childhood to be a KGB assassin. This brings her under S.H.I.E.L.D.'s radar, and Clint Barton is sent to kill her but instead spares her life and recruits her into the organization. When Nick Fury activates the Avengers Initiative, she becomes a founding member. Following the fallout related to the Sokovia Accords, Romanoff becomes a fugitive and eventually reunites with her adopted family, including sister Yelena Belova, and they work together to destroy General Dreykov's Black Widow program. After Thanos erases half of all life, Romanoff leads the Avengers for five years until she sacrifices herself, successfully helping the Avengers restore trillions of lives across the universe.

You can use any material to print this keychain: PLA, ABS, TPU, ASA, PETG, PVA, Nylon,...
You can print it in a single color or do a color change after layer 7 or 1.4mm, for my taste it looks much better in two colors.
I recommend using:
[Black PLA](https://s.click.aliexpress.com/e/_AsyiSZ)
[Red PLA](https://s.click.aliexpress.com/e/_AsyiSZ)

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

marvel keychain

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

skeleton wolverine keychain

Deadpool & Wolverine Best Friends Heart Necklace/Keychain

Lucky remix of Thor's Hammer Mk.II Keychain

Ms Marvel Keychain

She Hulk Keychain

Marvel Keychain Round

Iron Man Keychain

Thor's Hammer Keychain

Hulk Hand Keychain

Captain America Keychain

Black Widow Keychain

The Avengers Keychain