Creality K1 max glass lid and spool holder.

K1 max Glass lid holder 1.stl

Washi tape holder | Stash supplies inside with screw-on lid! | Fits 3 rolls of 16mm width craft tape

Washi tape holder_30mm x 16mm_3rolls_2_5mm_BASE_karenchaudesigns.stl

Gift Box Container (Dual Color Version)

lid-dual-wrap.stl

OP-1 BestCase Decksaver and Stand // Wicker

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

Minnie Mouse Pumpkin Bowl/Lid (+Bambu 3mf Files)

MinniePumpkin_Bowl.stl

Bottle cap/lid strap holder

A simple loop to attach the bottle lid/cap to. 

Printed in TPU

Nozzle Holder Tube

Nozzle Holder Tube.stl

Spider Web Hexagon Lid for Desk Grommet System | Halloween Desk Decor

Get ready for spooky season with this spider web lid for the [Desk Grommet System](https://than.gs/m/924318)

Watch the demo clip

Download more lids for the Desk Grommet System.

Remix these to create your own custom lids to fit your needs:
- (REMIX ME) Hexagon Lid: https://than.gs/m/924379 
- (REMIX ME) Round Lid: https://than.gs/m/924377


Lid for oil jar


 0 reviews
6
Arnav Purbiya
@ArnavPurbiya_933578
Made a little lid for the oil jar with a hole for spoon to stick out from

Shiba/Cat Style Twist Container

container_lower_part_kwerkshop.stl

Bear Style Twist Container

Round Lid (6-pointed) for Desk Grommet System

**Fits with:** 
Desk Grommet System | Base Screw & Nut: https://than.gs/m/924318

See other lids for the Desk Grommet System in my profile.

Traditional British Post Box Container

post_box_DISPLAY_ONLY.stl

Cheesy Box - No Holes

no_holes_FOR_DISPLAY.stl

Cheesy Box - Holes in lid

assembled_FOR_DISPLAY.stl

OP-1 BestCase // Simple Decksaver

Protect your OP-1 in the coolest way possible with a 3D printed case! Better yet, the OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

This case uses a friction fit designed for PLA, so materials that shrink more like ABS may be too tight.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these (also on eBay) or these.

 

Camelbak Mouthpiece Cover

I whipped up this cap to cover the mouthpiece on my [Camelbak](https://amzn.to/2CUjpPx) so it doesn't get dirty when I throw my bag around in the dirt.

As you can see I have a [mouthpiece conversion kit](https://amzn.to/2xeTn3B) that has an on/off valve and other neat features, but this print should work just fine with the standard mouthpiece. Simply take off the flexible bite valve, put this part over the tube, and put the valve back on to hold this in place.

After PETG and PET+ both failed on me after a few months of use, I've found that a flexible filament like [Fillamentum FlexFill](http://bit.ly/FlexFill) is the way to go! Pistachio Green is a great color :)

lid

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Creality K1 max glass lid and spool holder.

Washi tape holder | Stash supplies inside with screw-on lid! | Fits 3 rolls of 16mm width craft tape

View 16 new models

View 78 new models

Minnie Mouse Pumpkin Bowl/Lid (+Bambu 3mf Files)

Bottle cap/lid strap holder

Nozzle Holder Tube

Spider Web Hexagon Lid for Desk Grommet System | Halloween Desk Decor

Lid for oil jar

Shiba/Cat Style Twist Container

Bear Style Twist Container

View 12 new models

Traditional British Post Box Container

Cheesy Box - No Holes

Cheesy Box - Holes in lid

View 20 new models

View 66 new models

View 111 new models

View 10 new models

Fancy box