Citrus juicer “Boaty”

**A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.**
The spouts serve as a handle during the pressing process. Great for Oranges, Lemons, and Limes. The juicer is easy to clean, simply hold under running water.

Size:  130 x 164 x 64mm
This is the V3
Don't forget to post your makes!

**Print settings**
Required build volume: 130 x 164 x 64mm
Material usage: 60g
Print time: 6h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none

Check your Filaments if they are food save to print this product. If not, there are many companies that offer cheap and certified food save filament. E.g. Extrudr, Fillamentum, Filaments.ca, Makerbot. The cheapest one I found is the Extrudr NX1 or NX2 (matt) for 23,60 € / 1000g.

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

lemon squeezer

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Citrus juicer “Boaty”