Set the first layer to 0.10mm for better color infusion (if you are using filament like **Esun PLA-Silk Mystic** ,whic i used.)
For the rest of the print, set the layer height to 0.22mm.

**Add a pause at layer 3** to lay down the fabric and secure it with magnets.(https://www.amazon.com/dp/B096G9JN3X)

**Add another pause at layer 16** to place the magnets.
The magnet size is **20x10x2mm**. When the print pauses at layer 16, place the **4 magnets** for the lid.(https://www.amazon.com/dp/B0BMTZX4ND?th=1) 
**Ensure all magnets are placed facing the same direction; otherwise, the lid will not close properly.**

You can use the plate included with the file to cut the inner fabric of the bag (https://www.amazon.com/dp/B0BXSKQRZ4?th=1)
Once the fabric is cut, place it inside the bag accordingly and glue it using **Pattex Contact adhesive (plastic version) or E6000.**

Before assembling the side parts of the bag, press the tip of a sharp knife into the hole to make an opening for attaching the D-ring. You need to pierce the fabric from the inside of the bag outward. If you try to pierce it from the outside in, the fabric might come apart—though I haven't tested this myself. It's best to follow the method I used.
After making the hole in the fabric, you can super glue the side parts of the bag together. Once the bag is assembled, you will need these parts: https://www.amazon.com/dp/B0BM7D31RP?th=1    https://www.amazon.com/dp/B0CSN9CY8Y?th=1 


**I would like to extend my special thanks and respect to Kaizen3DPrints, who inspired me to create this model and allowed me to sell it as a model. I saw the clutch bag video on YouTube, and until that moment, the idea of 3D printing on fabric with an FDM printer had never crossed my mind. He showed me an entirely new ocean.**

The video I added is the video of **Kaizen3DPrints** assembling the bag, and my version goes through the same steps. By watching his video, you can also assemble this bag, which will also help his videos get more views. The main reason I added his video is that my speaking isn't fluent. If I could speak more fluently, I would have made my own video. (At this point, I'm saving your ears from the pain)










Polka Dot And Square Pattern Clutch Bag

3d clutch bag obj.obj

This is the pattern for a hood to be either sewn directly onto an existing hoodie, or to be used as a standalone hood / cloak. I like using a powermesh for these prints to increase flexibility. 

The file contains 2 different sized diamond patterns for a hood. One hood will take 4 separate prints on a 256x256mm build plate.  My settings are saved in the 3mf file, with the pause included at the beginning of layer 2. You can also download the individual STL files and add your own parameters. I print with a .24mm layer height for a total of 3 layers.

Once the prints are finished, you'll have to trim away the excess fabric on one end fold over the opposite side's fabric to attach with UV resin, like the other design illustrated in the general printing guide. You'll then be able to use this as your pattern to cut out your base material of choice. Sew the two pieces, separately, right sides together and unfold. Place the sewed inner lining inside of the assembled 3D printed mesh hood, and sew along the base of hood before sewing along the sides. You can also sew this onto an existing hood, although hoodie sizes may vary.

Visit https://kaizen3dprints.com/products/magnetic-p-flat-300mm-x-300mm for magnetic PFLAT options to change up the holographic effects.


holographic

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Polka Dot And Square Pattern Clutch Bag

Diamond Hood