Jolly Frosty Vase for Festive Decor

Jolly Frosty.3mf

Travel hygiene case set

soap holder SMALL bottom.STL

Bobby the Bob-Omb Christmas Ornament!

Bob_Omb_Ornament_V2.stl

Christmas Countdown - Christmas Day 1

countdown-body.stl

Annoying Easter Egg

annoying_easter_egg_bottom.stl

Open Lattice Christmas Bell

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**EASY PRINT**
If you just got your first 3D printer, this might not be the first thing you print, but it can be one of your earliest prints. Using the settings I recommend below, you should be able to print it with little difficulty.

**SUMMARY**
Here's a fun, quick, simple print to brighten up the holidays. The design is clearly a bell, but it also references Renaissance architecture. 

**COMMON PRINTING PROBLEMS**
Assuming you use the print settings I recommended below, here are some common problems and possible fixes:
* Mushy print: Reduce print temp.
* Comes off bed: Increase raft size. Reduce print speed.
* Print looks rough: Reduce print speed.
* Breaks during printing: Reduce print speed and print temperature. If you can, increase cooling. 

**PRINT TIME**
With my settings, it took about 3 hours.

**PRINT SETTINGS**
*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.8mm. If you want to go thinner to reduce weight, consider using Cura's “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer. That may prevent gaps in the print.
* Top/bottom thickness: 0.3mm

*Infill*
This doesn't need any infill. Seriously. 

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce chance the bell is pulled off the plate curing printing.

* Overall: 60mm/s
* Outer wall: 30mm/s
* Inner wall: 40mm/s
* Travel Speed: 65mm/sec

*Build Plate Adhesion*
The first layer of the bell is just a thin circle. I've found that a thin (4mm extra margin) raft works well to provide bed adhesion. It also separates more cleanly than a brim for this model. The raft only adds about 10 minutes to the print time.

*Supports*
I recommend printing with supports to ensure the roof of the bell prints cleanly. Ok, it doesn't show when it's hanging up, but I'm a perfectionist. With these settings, you'll only get supports where you need them.

* Support placement: Touching buildplate
* Support overhang angle: 71 degrees (this really is all you need)
* Support pattern: Gyroid
* Support wall line count: 1
* Support density: 15%

Not So... XL Elf,

Not so.. XL Elf.3mf

Twisted Christmas Tree

Twisted Christmas Tree.3mf

Snowflake Ornaments - Christmas Day 2

snowflake-ornament-1.stl

Geometric (Easter) Egg

1 of 8 eggs I've made for Easter/Spring celebrations, neat little things for decorating or for egg hunts etc.
You can find the rest on my profile, they're also shown in the pictures

Shouldn't need supports - the models pictured were printed without

holidays

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Jolly Frosty Vase for Festive Decor

Travel hygiene case set

Bobby the Bob-Omb Christmas Ornament!

Christmas Countdown - Christmas Day 1

Annoying Easter Egg

Open Lattice Christmas Bell

Not So... XL Elf,

Twisted Christmas Tree

Snowflake Ornaments - Christmas Day 2

Geometric (Easter) Egg

Snowdragon 2025

Kirby_Ornament_V1.3mf

The Toy Factory (Bundle Version)

Not So XL Grinch

Not Soo XL Santa

Peppermint Ornament - Christmas Day 11 - Candy

Santa Hat Flexi

Not So XL Easter Bunny - for smaller build plates

Not So XL Rudolph

Mini Gingerbread Cookie Dragon