XL Grinch, for larger build plates. It's here, The XL Grinch. For larger build plates, above 320x320x320 Standing at 36" or 91cm tall and printing in separate parts its the mush have model this holiday season. 🎄 XL Grinch Assembly Instructions This guide is for assembling The XL Grinch 3D model, designed for large build plates (above 320x320x320mm). The assembled model stands approximately 36 inches (91 cm) tall and prints in multiple separate parts. Makers & Finders ⚠️ Important Notes Before Starting     •    Glue Required: While most parts are stable, glue is necessary for elements that fight gravity, such as the left arm and hat tail, to ensure stability.     •    Dry Build: It is highly recommended to perform a test dry build first. Assemble the parts without glue to ensure everything fits and you understand the placement of all components.     •    Connectors: The model uses 6 different types of connectors. Spares of the main connectors are included.     •    Organisation: The arms are split into two sections each. Organise your parts (especially the arm components) before starting to make the assembly easier.     •    The head is the most supported object. because of the texture on the model the supports have little impact on the finish. the only part that may have a potential issue is just under the chin. but both my prints the supports came away super easy with setting the top z to 0.275.     •    one final point. in the 3 mf i have set the infill individually on various parts depending on the size. so smaller parts have more infill and larger less, down to 5%

    •    Step-by-Step Assembly Guide Follow the sequence below, generally working from the ground up: Step Component(s) Connector(s) Needed Notes 1. Base 4 Connectors Insert the 4 connectors into the base. 2. Boots Long Connectors Insert the long connectors through the boots and into the legs. (This improves stability over the original separate connectors). 3. Boot Cuffs connectors None Slide the boot cuffs onto the leg long connectors. 4. Legs 4 Connectors Slide the legs into place and secure them. 5. Bottom Jacket Fluff 4 Connectors Attach the bottom jacket fluff above the legs. 6. Belt 4 Connectors Attach the belt piece. 7. Main Body 4 connectors Attach the main body section. 8. Neck Fluff & Neck 2 connectors Attach the neck fluff, then slide the neck down and secure it with the single connector. 9. Head 2 Large, 2 Smaller Connectors Attach the head to the neck piece. 10. Hat Fluff 4 Connectors Attach the hat fluff above the head. 11. Hat Main 4 Connectors Attach the main hat section. 12. Hat Tail 1 Connector Attach the hat tail. 13. Hat Bobble 1 Smaller Connector Attach the hat bobble to the end of the hat tail. Arms and Accessories Assembly A. Right Arm (Top-Down)     1    Attach the top right arm section using the large connectors.     2    Connect the lower right arm section.     3    Add the cuff.     4    Attach the right hand. The hand has a connector that attaches it back to the main body. B. Left Arm (Top-Down)     1    Attach the top left arm section using the large connectors (The left and right arm parts are different and should be easy to distinguish).     2    Work your way down, attaching the remaining parts and the 3 connectors.     3    Attach the left hand at the end. C. Candy Cane (This is the same assembly as the XL Elf model.)     1    Slide each candy cane part in sequence (Red, White, Red, etc.) down the square connecting rod.     2    Use the smaller connectors at the bend of the cane.     3    Slide the assembled candy cane into the Grinch's hand. Glue is required for the candy cane. Final Details (Attach Last) These final pieces attach directly to the main structure: Detail Connector(s) Needed Attachment Location Notes Buckle 2 Small Connectors Belt Front Jacket Fluff 2 Small Connectors Main Body Nose 1 Small Connector Face/Head Eyebrows 2 Small Connectors (Each) Face/Head 4 Small Connectors total (2 for each eyebrow). Eyes None Face/Head Each eye part slides directly into the recesses. congratulations you have successfully completed the grinch build. Enjoy the build!

• NOTE FOR COMMERCIAL SUBSCRIBERS: This model is a fan art sculpt by me, im providing the files free to subscribers for personal use and due to licensing i cannot endorse the sale of this model by other. Any subscriber choosing to sell these items do so at sellers own risk.