Snowflake Ornament Variant 10

Christmas House

You can scale it up or down , you can check more of my designs on my instagram https://www.instagram.com/emx_performance/

Christmas ornament cookie man

Christmas ornament House

Santa Claus Ornament

Merry Christmas Tree

Empty Christmas Ornament

Mistletoe Variant 1

This is a Christmas Ornament, a Mistletoe. It prints within an 80mm by 80mm square, it is also 3mm tall. 

Xmas Tree Star⭐

This mini 3D printable Xmas tree star can fit most real and artificial trees. I work hard on these designs, so if you like my designs, a follow would be very helpful. Let's try to reach 150 downloads by the end of 2022.

Xmas Tree Star🎄🌟

Articulated Print-In-Place Christmas Nutcracker v1

Nutcracker TOP.stl

Mimic Christmas Present Decoration

It's just a present, how can a Christmas present hurt you?

Santa's Sleigh Ornament Variant 1

Santas Sleigh Ornament Variant 1, with back, it's a Christmas ornament that will print in an 80 by 80mm square, it's 3mm tall.

Christmas Tree🎄

This isn't really meant for anything in particular other than being a great decoration for putting tiny ornaments on. I work hard on these designs, so if you like my designs, a follow would be very helpful. Let's try to reach 150 downloads by the end of 2022.

Spiral Christmas tree with Star - Print in vase mode

Arvores Natal Espiral.stl

Christmas Tree WIth Star - Print in Vase mode

Arvores Natal Spikes.stl

Christmas decoration frame

Rahmen.stl

Recessed Spindle Ornament

Vintage Retro Inspired Spindle Christmas Ornament with Starburst Indent.

Prints standing straight up with a 50% build plate only support.

Creative Commons License BY-NC-ND 4.0

RetroMaker Recessed Spindle Ornament

Cone Trees

cone trees

Star Christmas Tree Ornament

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**WHAT IS IT?**
This is a fun Christmas tree ornament that would also make a fun suncatcher if it's printed with transparent filament. It's reminiscent of a cross, a star (it actually has 8 points), classical western architecture, and more. Using my settings, it's a nice weight at 100% and extremely light at 75% and smaller.

**EASY PRINT**
If you use my settings, you shouldn't have any problems getting this to print. If you print this with your printer's default settings, you'll get a paperweight with a mushy top.

**RESIZING**
At 100%, the ornament is a nice size for larger trees – especially for the base of the tree where you'd expect larger ornaments. However, you can scale this down to 50% and still get nice prints. At that size, the ornament looks good on miniature trees. I haven't tried printing it larger than 100%.

**PRINT TIME**
With my settings, it will take about 4.5 hours to print at 100% scale. At 50%, it takes a little over an hour.

**COLOR-CHANGE PLA**
I used TTYT3D's quick color change PLA. If you print one ornament with it at 100% with it, you'll get a subtle color change. For a more dramatic change, like in the size comparison photo, print several ornaments at once. To go all the way from gold to blue, you'll need the estimated print weight to be at least 75 grams (4 ornaments at 100%).

**HOW DO YOU HANG IT?**
I've concealed attachment points one the back of one of the points of the star. Just tie a piece of coat thread to them to create a loop.

**PRINT SETTINGS**
You'll generally want to print this at the lower end of your PLA's temperature range. I print TTYT3D PLA at 180 degrees, which is well below their recommended temperature. Maybe my printer just runs hot, but that temp prints more accurately with less stringing.

*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.4mm and choose the “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer (if you're using Cura – other slicers may not have this option). The alternate extra wall seems to prevent gaps in the print while minimizing the overall weight of the ornament. If you print below 75% scale, I suggest printing at 0.4mm without the alternate extra wall. I would also print without the alternate extra layer if you're using transparent filament.
* Top/bottom thickness: 2 layers for opaque filament, 1 for transparent filament
* Initial bottom thickness: 3 layers

*Infill*
This doesn't need any infill. Seriously.

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce the pull on the thin arms of the topper.

* Overall: 60mm/s
* Outer wall: 40mm/s
* Inner wall: 50mm/s
* Travel Speed: 100mm/sec

*Build Plate Adhesion*
I printed with just a skirt and it worked well every time. If you have difficulty getting the details of the first layer to adhere to your bed, try adding a raft.

*Supports*
I added supports to get the outer points of the ornament to print better, but you can do without them. The supports I added made little difference in print time or the amount of filament used. I found that adding supports on the side with the attachment points (for strings) was problematic (attachment points broke before supports separated) and unnecessary (model printed fine without the supports). So, I added a support blocker to that corner. Support settings:

* Placement: touching Buildplate
* Overhang: 69 degrees
* Pattern: Lines
* Density: 12%
* Enable Support Brim: Yes
* Brim Width: 4mm

*Common Problems*
* Uneven print: Reduce print speed or try scaling the print up in the Z dimension only. Scaling disproportionately may impact how the ornament hangs.
* Mushy print: Reduce print temp, increase cooling, or print more than one ornament at a time. 

holidays & Seasonal Events

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 23 new models

Christmas House

Christmas ornament cookie man

Christmas ornament House

Santa Claus Ornament

Merry Christmas Tree

Empty Christmas Ornament

Mistletoe Variant 1

Xmas Tree Star⭐

Articulated Print-In-Place Christmas Nutcracker v1

Mimic Christmas Present Decoration

Santa's Sleigh Ornament Variant 1

Christmas Tree🎄

Spiral Christmas tree with Star - Print in vase mode

Christmas Tree WIth Star - Print in Vase mode

Christmas decoration frame

Recessed Spindle Ornament

View 14 new models

Star Christmas Tree Ornament

View 31 new models