Let It Snow Vase for Christmas Decor

Let It Snow Vase.stl

Spiral Christmas Stretch Ornament 2024

Stretch Spiral Whole.stl

Swirly Holiday Tree

SwirlyTree.stl

Flexi Gingerbread Darth Vader Ornament

FlexiGingerbreadVader.V2.stl

 Flexi Gingerbread Chewbacca Ornament

FlexiGingerbreadChewbacca_Ornament_02.stl

Diamond Christmas Ball

After creating a bell with this pattern (see Diamond Christmas Bell, I wanted to see what it would look like as a ball. I loved it, so I had to share it with you. It printed easily for me with just a little support. It looks great with multi-color PLA, but it'll also look great in solid colored PLA (opaque or transparent).

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

***PRINT SETTINGS***
* Walls: 0.4 - 0.8 mm (I made the walls of the ball 2 lines thick and the walls of the stem 1 line thick).
* Layer Thickness: 0.15 mm recommended. Anything from 0.1 - 0.2 mm should look good.
* Infill: None. Seriously. It doesn't need it. It just adds weight and print time.
* Rafts/Brim: I didn't use either. 
* Supports: I added normal supports with an overhang angle of 56 degrees. It holds the ball to the printing plate and supports the extreme overhangs at the base without adding a lot of time to the print.

Star Christmas Tree Ornament

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**WHAT IS IT?**
This is a fun Christmas tree ornament that would also make a fun suncatcher if it's printed with transparent filament. It's reminiscent of a cross, a star (it actually has 8 points), classical western architecture, and more. Using my settings, it's a nice weight at 100% and extremely light at 75% and smaller.

**EASY PRINT**
If you use my settings, you shouldn't have any problems getting this to print. If you print this with your printer's default settings, you'll get a paperweight with a mushy top.

**RESIZING**
At 100%, the ornament is a nice size for larger trees – especially for the base of the tree where you'd expect larger ornaments. However, you can scale this down to 50% and still get nice prints. At that size, the ornament looks good on miniature trees. I haven't tried printing it larger than 100%.

**PRINT TIME**
With my settings, it will take about 4.5 hours to print at 100% scale. At 50%, it takes a little over an hour.

**COLOR-CHANGE PLA**
I used TTYT3D's quick color change PLA. If you print one ornament with it at 100% with it, you'll get a subtle color change. For a more dramatic change, like in the size comparison photo, print several ornaments at once. To go all the way from gold to blue, you'll need the estimated print weight to be at least 75 grams (4 ornaments at 100%).

**HOW DO YOU HANG IT?**
I've concealed attachment points one the back of one of the points of the star. Just tie a piece of coat thread to them to create a loop.

**PRINT SETTINGS**
You'll generally want to print this at the lower end of your PLA's temperature range. I print TTYT3D PLA at 180 degrees, which is well below their recommended temperature. Maybe my printer just runs hot, but that temp prints more accurately with less stringing.

*Thickness*

* Layer thickness: .15mm
* Wall thickness: 0.4mm and choose the “alternate extra wall” option so it alternates between 0.4 and 0.8mm walls with each layer (if you're using Cura – other slicers may not have this option). The alternate extra wall seems to prevent gaps in the print while minimizing the overall weight of the ornament. If you print below 75% scale, I suggest printing at 0.4mm without the alternate extra wall. I would also print without the alternate extra layer if you're using transparent filament.
* Top/bottom thickness: 2 layers for opaque filament, 1 for transparent filament
* Initial bottom thickness: 3 layers

*Infill*
This doesn't need any infill. Seriously.

*Speed*
You'll want to use slow printer settings to that the print is accurate and to reduce the pull on the thin arms of the topper.

* Overall: 60mm/s
* Outer wall: 40mm/s
* Inner wall: 50mm/s
* Travel Speed: 100mm/sec

*Build Plate Adhesion*
I printed with just a skirt and it worked well every time. If you have difficulty getting the details of the first layer to adhere to your bed, try adding a raft.

*Supports*
I added supports to get the outer points of the ornament to print better, but you can do without them. The supports I added made little difference in print time or the amount of filament used. I found that adding supports on the side with the attachment points (for strings) was problematic (attachment points broke before supports separated) and unnecessary (model printed fine without the supports). So, I added a support blocker to that corner. Support settings:

* Placement: touching Buildplate
* Overhang: 69 degrees
* Pattern: Lines
* Density: 12%
* Enable Support Brim: Yes
* Brim Width: 4mm

*Common Problems*
* Uneven print: Reduce print speed or try scaling the print up in the Z dimension only. Scaling disproportionately may impact how the ornament hangs.
* Mushy print: Reduce print temp, increase cooling, or print more than one ornament at a time. 

Not so… XL Nutcracker, for smaller build plates

Not so.. XL Nutcracker.3mf

Not So... XL Elf,

Not so.. XL Elf.3mf

Diamond Kaleidoscope Easter Egg

Diamond Kaleidoscope Easter Egg Top.obj

LEt'sGO - Spider Decorations for MandicReally's Wreath

KAWAII.stl

Christmas Ball - Fine Diamond Lattice 

Christmas Ball Fine Diamond Lattice.stl

Snowdragon 2025

Snowdragon 25.stl

Not So XL Grinch 

Not So.. XL Grinch.3mf

Lattice Easter Egg 2024

Lattice Egg 2024 Top.stl

Not Soo XL Santa 

Xl santa a1 build.3mf

Not So XL Rudolph

Not so XL Rudolph.3mf

Diamond Christmas Bell

This is the third in this year's Christmas bell series. It prints quickly ad easily. Use a nice medium toned silky, metallic or multicolored filament to show off the geometry - or use translucent filament to make it glow.

This is based on my closed lattice, spiral and open lattice bells. It's roughly the same size (slightly taller) with a new loop at the top and a new lattice pattern. 

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**PRINT SETTINGS**
* Walls: 0.4 - 0.8 mm (I used 0.4 mm for the clear bell and added an alternating extra line for the opaque bell)
* Layer Thickness: 0.15 mm recommended. Anything from 0.1 - 0.2 mm should look good.
* Infill: None. Seriously. It doesn't need it. It just adds weight and print time.
* Rafts/Brim: I didn't use either. However, the first layer is just a single width circle, so you may need to add a brim or raft.
* Supports: None. I designed this to print cleanly without them.

XL Grinch

XL Grinch.3mf

XL Nutcracker for larger build plates 

XL nutcraker.3mf

holiday decoration

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Let It Snow Vase for Christmas Decor

Spiral Christmas Stretch Ornament 2024

Swirly Holiday Tree

Flexi Gingerbread Darth Vader Ornament

Flexi Gingerbread Chewbacca Ornament

Diamond Christmas Ball

Star Christmas Tree Ornament

Not so… XL Nutcracker, for smaller build plates

Not So... XL Elf,

Diamond Kaleidoscope Easter Egg

LEt'sGO - Spider Decorations for MandicReally's Wreath

Christmas Ball - Fine Diamond Lattice

Snowdragon 2025

Not So XL Grinch

Lattice Easter Egg 2024

Not Soo XL Santa

Not So XL Rudolph

Diamond Christmas Bell

XL Grinch

XL Nutcracker for larger build plates