Twisted Vase

Just a vase with a cool twisty pattern.

Print Settings:
DO NOT use vase mode
.1 - .2 mm layerheight
no supports
the model is scalable to any size you want to print it at

Soap Holder Squared - NO SUPPORT

SOAP HOLDER!

Print it vertical!
No support needed!

Soap Holder Squared.stl

Egg Bunny Buddy

BunnyBody.stl

Card Case Top.stl

Beginner Set.3mf

DRIO - Magnetic Desk Organizer - Fluted pattern

DRIO - Fluted pattern - Flowalistik Studio.3mf

Living Room Gaming Sideboard / Suitable for PS5, XBOX and SWITCH Controller

Sideboard.stl

Wood Pint Glass Koozie - Axe Head Handle

Wood with Riveted Bands - Axe Handle - Pint.stl

Christmas Train Cart – Festive Holiday Multi-Purpose Holder

Christmas Train Cart.stl

Replacement Microphone Holder

If your mic holder snaps like mine did hopefully this print can save the day. The connecting hinge is 5.8mm wide with a 7.2mm hole. I used my heat gun to better form the clip to my microphone, [as shown in this video](https://youtu.be/bxhblZbzzjM).

 

I printed at 0.15mm layer height with 7 shell thickness for a strong print that should last a long time.

#gridfinity Testclip holder

Holder for 3x7 of these test clips
[https://www.aliexpress.com/item/33060152163.html](url)

Fusion 360 link
https://a360.co/3S4rcwJ


Holder by Kasper Tulstrup
Gridfinity by Zack Freedman

Hand Held Fan Display Holder

MyFanHolder1.stl

SCHNAUZER GLASSES HOLDER V2

TIMUX_SCHNAUZER_V2_FRONT.stl

(Multifunctional) Lotus Flower

(Multifunctional) Lotus Flower_Full.stl

Interchangeable Vase Hexagon Design

Display Only Interchangable Vase.obj

Daisy Bloom Organizer - Floral Storage

organizer_and_camomile.3mf

SSD Holder Gridfinity

GridfinitySSDHolder1.3mf

Basic Knife Holder V2

DRIO - Magnetic Desk Organizer - Dot pattern

DRIO - Dot pattern - Flowalistik Studio.3mf

Spray Bottle Hangar 

This is a Spray bottle hangar I designed around a basic idea with a strict guideline. 
No brim, rafts or supports required.
These are capable of holding 1KG and can withstand roughly 1G of force applied to them In this revision if you have good layer adhesion. Printed upright I found minimal to no stringing even on an untuned machine. This is a 1-2 hour print depending on the machine. Light on material and strong I print this at 3 wall, 3 top/bottom and 10-20% infill. Tested in Esun PLA+ and in Esun PETG. Please share with attribution and give feedback as this was my first design taken to testing and commercial phase. Some early concepts are in photos and had many issues, early revisions can be provided if wanted for some reason. Best mounting practice is 2 x 8G 16mm Button heads, Remove mouse ears after print.
 

** Update
V1_6
Re sketched and reformatted some of the features for increased slicer reliability and modified how the different facets of the design interact. This has reduced file size from  9.64Mb to 1.06Mb. Changed Mouse ear generation from eye balled placement to a grid deploy and changed the 2 sides from separate sketches to a mirrored sketch increasing the symmetry by 0.05mm. 
Again any issues or notes please comment, Makes are always appreciated. 

Magnetic Tack // Peg Anything

peg-magnet-6x3mm.stl

holder

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Twisted Vase

Soap Holder Squared - NO SUPPORT

Egg Bunny Buddy

Card Case Top.stl

DRIO - Magnetic Desk Organizer - Fluted pattern

Living Room Gaming Sideboard / Suitable for PS5, XBOX and SWITCH Controller

Wood Pint Glass Koozie - Axe Head Handle

Christmas Train Cart – Festive Holiday Multi-Purpose Holder

Replacement Microphone Holder

#gridfinity Testclip holder

Hand Held Fan Display Holder

SCHNAUZER GLASSES HOLDER V2

(Multifunctional) Lotus Flower

Interchangeable Vase Hexagon Design

Daisy Bloom Organizer - Floral Storage

SSD Holder Gridfinity

Basic Knife Holder V2

DRIO - Magnetic Desk Organizer - Dot pattern

Spray Bottle Hangar

Magnetic Tack // Peg Anything