1/4 Quater inch jack holder collection

Holder for 10 1/4" headphone jack accessories.

1/4 Quater inch jack holder 10

Headphone Hook holder hanger wall mount

A compact headphone hanger with a 3.5mm screw hole

Headphone Hook

Desktop Headset "T" Hanger

desk top T hanger v1.stl

Vertebrae - Skull Candy Headphone Stand 

Skull Vertibrae Headphone Stand.3mf

Gyroid Cones for Head(amame) Headphones - Dual Extruder Files

Gyroid Cone Bottom Right no Mic - Infill.stl

Gyroid Cones for Head(amame) Headphones - Single Extruder Files

Gyroid Cone Bottom Right no Mic.stl

Prismatic Headphone Stand - Geometric Headphone stand

Triangle Stand - One Piece Back.stl

Aux Headphone Jack Plug 3.5mm

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

---

For some reason the headphone jack on my HTC vive was giving me a slight electrical shock when resting on the back of my neck, so I made this little plug to cover it up. Perhaps it could also be used to keep dust out of aux jacks while not in use or for other purposes.

----

Photographed model was printed with [MatterHackers Light Blue PRO Series PLA](https://bit.ly/PRO-PLA)

goose_Head_PrintStart3D.stl

Easy 1 piece design - no supports
Give your headphones some company with this 3D printed Goose holder!

Attaches to the wall with double sided 3M tape.

I painted mine orange with acrylic paint.

Make money by signing up for the PrintStart3D commercial license and sell this 3D printed model!
www.printstart3d.com

Voronoi Cones for Head(amame) Headphones

Display only do not print.stl

Barbie-inspired Headphones Stand

DISPLAY ONLY.stl

Headset holder 

headset body.stl

Spiderman Headphone Stand

Spiderman top.stl

ATH-M40x/50x Earcup Shells

ATH-M40x Earcups (Left and Right Sides).3mf

Game of Thrones Headphone Stands (3 options)

DISPLAY ONLY (13).stl

Mandalorian Headphone Stand

Magnetic Headphone Stand

Arm.stl

Headphone Horns

A fun little accessory for your headphones, headband, or whatever.  Designed to hold a velcro strap to keep them in place.

Headphone Stand

Simpler_headphone_stand_full.stl

Headphone Rest - v3 (for Laptop, Notebook)

The goal of my design is to create some kind of rest or hook for a headphone / headset while you are working on your notebook/laptop.
My headphone was always laying arround and i wanted a cleaner desk.

The headphone rest have to be placed / double tape glued onto the backcover of the notebook/laptop.

The headphone rest can be slided out to hang on your headset to the hook and if you put your notebook/laptop in a bag for travel etc.. you can just simply slide the rest in.

The example pictures will show you where to place it and how to use it :)

If you like my design, i would appreciate it if you buy it to support me for my time to create it and make future designs possible.

Note: Double side tape - i used a 0.8mm thin double sided tape with a width of 30mm (which fits perfect for the design), you may use a 3M or a similar tape from amazon, aliexpress, local store etc.

Befor you glue it onto the notebook/laptop - make sure both have temperatures > 20°C and the spot where you tape it onto the notebook/laptop is free of dirt, dry and cleaned (like with isopropylalcohol ...) to get a nice bond. (Make sure you do not damage the backcover by the material used).

If you like the design, you can fill out the offset surfaces with a white/colored waterproof pencil to give it a highlight.


Print material: PETG (recommended)
Nozzle size: 0.4mm
Layer height: 0.16mm or 0.12mm works perfect. (maybe 0.2mm works too, but i have not tested it since the parts are small)
Print duration: 1 set (base + slider) was 42min on my Prusa MINI+

Postprocessing:
- Place the double sided tape on the back of the base
- Put a very very small dip of grease / oil onto the "inner rails" of the base
- Connect the slider into the base with a little force to "snap in"
- Try to move the slider from side to side, if it runs smooth all good, if not, maybe a little sanding/mechanical smoothing is needed.

headphone

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

1/4 Quater inch jack holder collection

View 24 new models

View 40 new models

View 27 new models

Gyroid Cones for Head(amame) Headphones - Dual Extruder Files

Gyroid Cones for Head(amame) Headphones - Single Extruder Files

View 10 new models

View 66 new models

View 11 new models

Voronoi Cones for Head(amame) Headphones

Barbie-inspired Headphones Stand

Headset holder

Spiderman Headphone Stand

ATH-M40x/50x Earcup Shells

Game of Thrones Headphone Stands (3 options)

Mandalorian Headphone Stand

Magnetic Headphone Stand

Headphone Horns

Headphone Stand

Headphone Rest - v3 (for Laptop, Notebook)