Li'l Batman Who Laughs - #MASKtober - Comic Fanart Collectible

Lil_LaughBat.3mf

Cthulhu Head (Pre-Supported)

Cthulu_Head.stl

Little Big Head- Samara (The Ring)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***New Series 'Little Big Heads' 
Sculpted by @ChelsC423***
***
If you would like to support us and receive exclusive to Patron models and more Little Big Heads every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

LBH-Samara (The Ring).stl

kirby link 3mf

Fluffy Stitch

I like Fluffy!  This is a counterpart to Experiment 626. Sitting curiously holding a small baby duckling, This is the cute version of Stitch. 

Twisted vase mode can cup 12oz

This is my entry for the Thangs Workspace Design Challenge.

I have modified MandicReally's 12oz Can Cup   design to be functionally printed in spiral vase mode. This modification allows for a fast print and almost half as much filament used while maintaining the structure and still fitting a 12oz can.

I printed it with a 0.8mm nozzle, 0.4mm layer height, 1.0mm line width, no top/bottom layers and one continuous outer line (spiral vase mode).

Original can cup 12oz

Poison Apple Snail- (Little Big Head Series)

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***

Bioshock Splicer Mask -"Underwater" (Sculptober Day 6)

BioshockSplicerMask.stl

Totorock (The Rock + My Neighbor Totoro) - Support Free

Totorock (The Rock + My Neighbor Totoro Mashup) - No Supports Needed

Remixed from:

https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson &
https://www.thingiverse.com/thing:2855260

Size: 118 x 73 x 124

If you would like to support my work, or have access to all of my files you can consider joining my Patreon!

patreon.com/thinair3D


Wooper (Pokemon)

Wooper_Whole.stl

Vishnu & Lakshmi resting on the Divine Snake Sesha

One of the most recognizable images of Hindu mythology, Lord Vishnu relaxing in the Kshira Sagara (the Milky Ocean) symbolizes bliss, diversity and the powers of creation. This exquisite model depicts Lord Vishnu relaxing on a bed made by the mythical five headed snake Seshnaag. Vishnu is often depicted as resting on Shesha. Shesha is considered a devotee or bhakt of Vishnu. Goddess Lakshmi is also seen accompanying Vishnu on his bed.
Shesha is generally depicted with a massive form that floats coiled in space, or on the ocean of bliss, to form the bed on which Vishnu lies. Sometimes he is shown as five-headed or seven-headed or ten-headed serpent; but more commonly as one thousand-headed, or five thousand-headed, or ten thousand-headed, or fifty thousand-headed, or one hundred thousand-headed, or even five hundred thousand-headed, or even as many as one million-headed serpent; sometimes with each head wearing an ornate crown.
His name means "that which remains", from the Sanskrit root śiṣ, because when the world is destroyed at the end of the kalpa, Shesha remains as he is. Shesha is also depicted as floating in the ocean of the changing world, forming the bed of Mahavishnu. Since he is known as Adishesha (the foremost of snakes) and because he is Anantashesha or simply Ananta (endless, as He is known to remain in existence even after the end of the Kalpa, when the whole universe is destroyed).

[Support MGOI, become a Patron!](https://www.patreon.com/bePatron?u=52346760)


Lizard Keychain

Lizard with movable head that has a hole for a keychain. We used a 16mm jump ring but the hole also worked for with the 1" key ring. 

Nintendo switch crystal cartridge holder

Here is Nintendo switch crystal cartridge holder. Inspired by similar models I've seen but none of them had the cartridges inside the crystals, this holder fixes that problem. Now you can fell like a hero as you pull your favourite game out of a crystal. No Supports needed, Print Speed 50ms, Nozzle 0.4, Infill 10%.

Kirby Coaster

BASE.stl

Rockward (Squidward + The Rock)

Just a fun mashup I slung together.  Supports are needed for this model. Remixed from these two files: 
1) https://www.prusaprinters.org/prints/32751-dr-smolder-bravestone-dwayne-johnson

2) https://sketchfab.com/3d-models/squidward-tentacles-8d8cae9fd10f40878df75bcea30ba2eb

**Printing, Assembly & Post Processing**

**FDM or Resin:** FDM or resin			
**Scaling:** Current Size: 44 x 46 x 128. Scale up or down as you please!			
**Supports:** Supports needed everywhere, including the head!		
**Nozzle Size I Used:** 0.4			
**Infill/Perimeters:** 15% with 2 perimeters 
**Layer Height:** I used 0.20, but any layer height should be fine.

**This design is uploaded with a non-commercial license. Purchasing this file does not grant you the rights to sell commercially.

If you would like to consider gaining access to ALL of the models and the rights to print and sell, you can check out my Patreon at https://thangs.com/user/ThinAir3D/profile		

Lattice Skull Wire Weave

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


head

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Li'l Batman Who Laughs - #MASKtober - Comic Fanart Collectible

Cthulhu Head (Pre-Supported)

Little Big Head- Samara (The Ring)

kirby link 3mf

Fluffy Stitch

Twisted vase mode can cup 12oz

Poison Apple Snail- (Little Big Head Series)

Bioshock Splicer Mask -"Underwater" (Sculptober Day 6)

Totorock (The Rock + My Neighbor Totoro) - Support Free

Wooper (Pokemon)

Vishnu & Lakshmi resting on the Divine Snake Sesha

Lizard Keychain

Nintendo switch crystal cartridge holder

Kirby Coaster

Rockward (Squidward + The Rock)

Lattice Skull Wire Weave

Skeleton Hands Skull Planter-Bowl

Springy Ghost || Halloween

Gaboon Viper Snake Skull (Bitis gabonica)

Nightcrawler (X-MEN).stl