**Support My Work**
If you appreciate my designs and would like to support my work, or if you're interested in purchasing individual models instead of a subscription, here are some options available:
Cults3D: [Purchase individual models here](https://cults3d.com/en/users/fulv/3d-models)
Thank you for your support! If you have any questions, feel free to reach out at fulv@me.com.

**Haunted Hill Model Overview**
Introducing the Haunted Hill Model!

This add-on is designed to complement my Haunted House 1 & 2, enhancing your spooky decor.

**Key Features:**
- Lit Graveyard: Includes gravestones, pumpkins, a devil skull, and lanterns to create a haunting atmosphere.
- Customizable Entrance Gravestone: Personalize your spooky entrance.
- Lighting Integration: Designed to accommodate simple and wire Christmas lights, widely available.

**Printing Details:**
- Bambu Lab Project File: Now included, with all settings and color changes pre-configured for your convenience! 😊
- Easy Assembly: The model prints easily and comes with clear, step-by-step instructions.
- Color Options: Choose your favorite spooky colors for printing—no painting required (unless you want to customize further). Just a bit of glue is needed!

**Bundle Option:**
- This model is available as a bundle with Haunted House 2 for a complete spooky setup.

**Print Requirements:**
- Build Plate Size: Minimum of 204mm x 199mm x 130mm to print all parts as is.
- Scaling: If your build plate is smaller, you can scale down by 5% to 7%. Note that this may affect the layer heights for color changes, so double-check in your slicer.

**Lighting Recommendations:**
- LED Lights: Use small USB or battery-operated LED lights. I’ve used inexpensive battery-operated wire Christmas lights for the graveyard (see picture).
- Wiring: Wires can be routed out of the model through the cutout at the back.

If you have any questions or need assistance, don’t hesitate to reach out! I’m here to help. Happy haunting! 👻✨

Video:
[https://youtu.be/a9ce4f6dlAQ](https://youtu.be/a9ce4f6dlAQ)

**Printing Details for the Haunted Hill Model**

**Print Specifications:**
- Layer Height: All parts have been printed at 0.2mm. The base parts can also be printed at 0.3mm if you prefer a quicker print.
- Filament: Recommended filament is Polymaker PLA for optimal results.

**Included Resources:**
- Color and Material Guide: A PDF document with the list of colors and materials used is provided.
- Slicer Compatibility: The model can be sliced using any Slicer.

**Printing Times:**
- Longest Print: The front left base part takes approximately 12 hours.
- Other Parts: All other parts have shorter print times.

**Build Plate Requirements:**
- Minimum Size: Your printer should have a build plate no smaller than 204mm x 199mm x 130mm to print all parts as designed.
- Scaling Option: If your build plate is smaller, you can scale the model down by 7% to 10%. Note that scaling may affect the layer heights for color changes, so be sure to double-check in your slicer.

If you have any questions about the printing process or assembly, feel free to reach out! Happy printing! 🎃✨

Haunted Hill

STL Demo Placeholder (Use Master File Instead).STL

**Support My Work**
If you appreciate my designs and would like to support my work, or if you're interested in purchasing individual models instead of a subscription, here are some options available:
Cults3D: [Purchase individual models here](https://cults3d.com/en/users/fulv/3d-models)
Thank you for your support! If you have any questions, feel free to reach out.

### Haunted House 2 & Haunted Hill Bundle

#### Overview
Introducing the **Haunted House 2 & Haunted Hill Bundle**, a perfect addition to your Halloween decor! This updated model features a charming garden complete with a graveyard and is designed to accommodate lighting, transforming it into a spooky lamp that’s perfect for any time of year. 

#### Design Features
- **Bambu Lab Project Files Included**: All settings and color changes are pre-configured for your convenience, ensuring a seamless printing experience.
- **Interactive Lighting**: Designed to incorporate various types of lights, including simple wire lights that can illuminate the graveyard and house beautifully.
- **Stunning Visuals**: When the moon and lights are turned on, the combination creates an enchanting atmosphere that’s perfect for Halloween or year-round decor.

#### Model Components
- **Haunted House 2**: An updated design from the original, now featuring a garden and graveyard.
- **Haunted Hill**: A companion piece that enhances the spooky scene.

#### Printing Specifications
- **Easy Assembly**: The model is designed for straightforward printing and assembly, with full step-by-step instructions provided.
- **No Painting Required**: Choose your favorite spooky colors and print—no painting necessary unless desired!
- **File Organization**: All STL files are neatly organized in a zipped folder for easy navigation.

#### Dimensions
- **Assembled Size**: 
  - Approximately **280 x 360 x 400mm** (with the moon) 
  - **450mm** including the pumpkin.

- **Build Plate Requirements**: 
  - Minimum size of **204mm x 199mm x 130mm**. 
  - If your build plate is smaller, the model can be scaled down by 5% to 7%. Note that scaling will affect the layer heights for color changes, so adjustments in your slicer will be necessary.

#### Lighting Options
- **Versatile Lighting**: Use any small LED USB or battery-operated lights.
- **Recommendations**:
  - For the graveyard, inexpensive wire Christmas lights work well.
  - For the house, two USB Toolmoon light bulbs are recommended one vertical and one at a 90 degree angle.
- **Wire Management**: Wires can be routed out of the model through a cutout at the back next to the steps.

#### Support
If you have any questions or need assistance, feel free to reach out. I’m here to help!

#### Conclusion
Elevate your Halloween spirit with the **Haunted House 2 & Haunted Hill Bundle**. With its enchanting design and interactive lighting features, this model will be a delightful addition to your seasonal decor. Happy printing! 🎃👻

Haunted House 2 Bundle

**Support My Work**
If you appreciate my designs and would like to support my work, or if you're interested in purchasing individual models instead of a subscription, here are some options available:

Cults3D: [Purchase individual models here](https://cults3d.com/en/users/fulv/3d-models)
Thank you for your support! If you have any questions, feel free to reach out.


### Haunted House 2 Model Overview

**Introducing Haunted House 2!**  
This updated model features exciting new options and enhancements, including Bambu Lab Project files with all settings and color changes pre-configured! 😊

#### Key Features:
- **Multiple Variants:**
  - Haunted House 2 with a 3D Lithophane Moon
  - Haunted House 2 with no moon
  - Haunted House 2 with a big Lithophane Pumpkin
- **Texture Options:** Choose between rough and clean texture walls for the main house.
- **Fewer Parts:** Streamlined design compared to the original Haunted House Mark 1.
- **Bundle Compatibility:** Fully compatible with the Haunted Hill model, available as a bundle.

#### Lighting Integration:
- **Spooky Lamp Design:** The model is designed to incorporate various lighting options, creating a stunning effect when illuminated—perfect for Halloween or year-round.
- **Lighting Options:** Use small LED USB or battery-operated lights. An adapter is included for LED strip lights.
- **Recommended Lights:** Two USB Toolmoon light bulbs (one vertical and one at a 90 degree angle) were used for optimal effect.

#### Printing Details:
- **Easy Assembly:** The model prints and assembles easily, with full step-by-step instructions provided.
- **Color Choices:** No painting is necessary unless desired—simply choose your favorite spooky colors and print!
- **File Organization:** All STL files are zipped and organized for easy navigation.

#### Build Plate Requirements:
- **Minimum Size:** Your printer should have a build plate no smaller than 205mm x 191mm x 128mm to print all parts as designed.
- **Scaling Option:** If your build plate is smaller, you can scale the model down by 5% to 7%. Be mindful that scaling may affect the layer heights for color changes, so check in your slicer.

#### Wiring Management:
- **Wire Routing:** Wires can be directed out of the model via the cutout at the back, next to the steps of the back door.

If you have any questions or need assistance, please don't hesitate to reach out! I’m here to help. Happy haunting! 👻✨




Haunted House 2

These are the roof pieces for the Magnetic Tile Haunted House. 

****3D Print Settings****
PLA Filament works great
Layer height 0.2mm
Infill 15%
No supports need 
****Neodymium magnets needed for all Roof Pieces (except chimney): 20x5x2 and 10x5x2****
****Neodymium magnets needed for chimney: 10x5x2 OR 12x5x3****
Magnetic build plate highly recommended but not absolutely necessary.

Here is a link to Amazon for the magnets needed for these prints: https://www.amazon.com/shop/3dpmom
 
****How to Print Roof Pieces****
For the roof pieces , you will need to use 20x5x2 and 10x5x2 neodymium magnets only.  I strongly recommend using these size magnets. If you go larger it may not allow the magnets to rotate within their chambers. 

For all of these pieces, add a pause print to insert the magnets as shown in the photos for each design. When the print is paused insert the magnets.    

For the Roof Corner Piece, Roof Dormer Piece,  Roof Deep Dormer Piece and Roof Panel Pieces you will need to ****pause the print twice****: the first pause will be at layer height 7.8mm; the second pause print will be at 87.2mm. 

****Note:**** For the second set of magnets to be inserted at the 87.2mm height you will need to to place a magnet on the outside of the print to hold the ‘inside’ magnet in place. (Otherwise the magnet may ‘jump out’ and stick to the print head.)  

After the magnets are inserted/secured, resume the print. When you are done with the print simply remove the magnets off from the outside of the print. That's it:)

I have also included a 3mf print profile with the following print plates:
Print Plate #1 (Roof Corner Piece): one color, pause inserted at layer 39 (layer height 7.8mm) AND Layer 436 (layer height 87.2mm)
Print Plate #2 (Roof Dormer Piece): one color, pause inserted at layer 39 (layer height 7.8mm) AND Layer 436 (layer height 87.2mm)
Print Plate #3 (Roof Deep Dormer Piece): one color, pause inserted at layer 39 (layer height 7.8mm) AND Layer 436 (layer height 87.2mm)
Print Plate #4 (Roof Panel Piece): one color, pause inserted at layer 39 (layer height 7.8mm) AND Layer 436 (layer height 87.2mm)
Print Plate #5 (150x75 Roof Piece): one color, pause inserted at layer 30 (layer height 6.0mm)
Print Plate #6 (75x75 Roof Piece): one color, pause inserted at layer 30 (layer height 6.0mm)
Print Plate #7 (75x37.5 Roof Piece): one color, pause inserted at layer 30 (layer height 6.0mm)
Print Plate #8 (Chimney): one color, pause inserted at layer 30 (layer height 6.0mm)

Have fun printing!

haunted

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Haunted Hill

Magnetic Tile Haunted House: ROOF