Standard Hanger

Standard Hanger Display Only.stl

The "Rota" Wall Planter

2.75 Wall Design 5.3mf

Toilet paper holder print-in-place

**A quick and easy toilet paper holder. The design is print-in-place and uses very little material.**

**Instructions:**
- Print the thing
- Glue it on the wall with 3M tape or wall mount glue.

Don't forget to post your makes!

**Print settings**
Required build volume: 130 x 160 mm
Material usage: 35g
Print time: 2h – 3h

Material: PLA
Print direction: stl is rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 5
Infill: 30%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Coathanger S-Hook

S_Hook_35mm.stl

WPM Accessory - Folding Hooks

WPM Acc Folding Hooks 1v00a main.stl

EZPZ Pegboard Hook // 10mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Donut Disturb - Door Hanger 

Donut Disturb 3mf.3mf

Towel hanger

Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a hook - it is often a struggle to find the loop and the towel is probably still wet after a few hours.
This simple and well working solution is a mix between the two options. Just throw the towel over and don’t worry about it not drying or falling down.
 
You can either screw or glue it onto your wall or cabinet. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size: ca 175 × 75 × 50 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 180 x 180 x 60 mm
Material usage: 40g
Print time: 4h – 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Minimalist Design Headphone Stand, Headset Holder

Base.stl

Camel Hook LARGE

LARGE Wire Rack/ Shelf Hooks / Hangers.
Camel Hooks have humps, those humps have purpose, humps hold more infill, humps make you strong like bull!

Poster Hangers

angolare.stl

Universal towel hanger

Universal towel hanger.stl

Multi hanger Snake same - BackToSchool

This is a space saving hanger for a clothes rail.
This is a small device which you can hang you clothes on and reduce the number of hangers taking up precious space on a rail. 
Hangers can be hung on the lower levels of this design.
Great for college or uni students or even anyone who wants to save space.

Multi hanger Snake same

EZPZ Pegboard Hook // 15mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Keychain Loop // 8mm Raindrop

Loop_8mmID_Raindrop.stl

EZPZ Keychain Loop // 8mm Ring

Loop_8mmID_Ring.stl

Teardrop Pod (FCC Lattice)

This Teardrop Pod can be used to hang plants, moss, or any other small object. It is part of a series of three featuring delicate lattice structures that use very little material to print. These models are designed for resin printing.

See here for video: https://youtu.be/ZT0Dhcexz80 

Download the full set:
Teardrop Pod FCC Lattice:
Teardrop Pod Reentrant Lattice:
Teardrop Pod Truncated Cube Lattice:

This design is sponsored by Resins3D. Models shown are printed on an Elegoo Saturn 2 8K with Phrozen Dental Study white resin.


hanger

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Standard Hanger

The "Rota" Wall Planter

Toilet paper holder print-in-place

Coathanger S-Hook

WPM Accessory - Folding Hooks

EZPZ Pegboard Hook // 10mm Reinforced Hook

Donut Disturb - Door Hanger

Towel hanger

Minimalist Design Headphone Stand, Headset Holder

Camel Hook LARGE

Poster Hangers

Universal towel hanger

Multi hanger Snake same - BackToSchool

EZPZ Pegboard Hook // 15mm Reinforced Hook

EZPZ Keychain Loop // 8mm Raindrop

EZPZ Keychain Loop // 8mm Ring

Teardrop Pod (FCC Lattice)

Belt Hanger

DaveMakes Modular Building Set – Closet and Storage

Over Door Double Hook - Strong Door Hook