I recently released my ‘Mega’ Magnetic Tile Haunted House Collection but have been wanting to make a playful, scaled down version - so here it is 👻 This is my ‘Mini’ Magnetic Tile Haunted House that is ¼ the scale of my original. For extra fun, many of the windows have 2-sided window panes that rotate, there's a skeleton that greets you behind a hinged front door, tombstones to decorate the front yard and all the spiders, cats, rats, ghosts and skeletons you can handle 🕷🎃🐈‍⬛🐀👻 (These tiles are compatible with store bought magnetic tiles just fyi:)

****3D Print Settings****
PLA Filament
Layer height 0.2mm (for some of the more detailed pieces - like the rat windows and tombstones you can use a 0.16 layer height if preferred)
Infill 15%
Brim may be needed on larger pieces (like the 150x75 walls) if you notice any warping

****Neodymium magnets needed: 20x5x2 ****

- I specifically designed all these pieces to work with this size magnet

- Here is a link to these magnets on Amazon: ****https://amzn.to/3Nibhd3****

- Magnetic build plate highly recommended but not absolutely necessary.


****Printing Instructions for Inserting Magnets and Filament Pieces:****

- Every piece in this collection (except for the Porch Pillars and the Chimney Cap) need to be paused at layer 30 (layer height 4.8mm) to insert magnets. 
- The Front Door piece and all the window panes that rotate also need cut pieces of filament placed in the ‘filament chamber’ areas (see photos and video). 
- It helps to straighten the filament pieces that will be inserted into these pieces.  I have designed a separate 3D printed device to do that (I call it the ‘filament straightening block’) and will link a video below.

- After the magnets/filament are inserted, resume printing

****I have also included a 3mf print profile with the following print plates:****
Print Plate #1 Mini HH_75X75_Front Door: 4 colors, pause at layer 30, cut and insert filament pieces to fit into filament chamber areas
Print Plate #2 Mini HH_75x75_Curved Cat & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #3 Mini HH_75x75_Curved Spider & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #4 Mini HH_75x75_Curved (Plain) Window: 3 colors, pause at layer 30
Print Plate #5 Mini HH_75x75_Rectangle Spider & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #6 Mini HH_75x75_Rectangle Pumpkin & Ghost Window: ****5 colors!!****, pause at layer 30. Cut and insert filament pieces to fit into filament chamber areas.
This is the only piece with 5 colors. You will notice I colorized both the ghost and the pumpkin white.  After the white is done printing the ghost you will need to change out the white filament for orange before it starts printing the pumpkin.  Pause the print if needed to do this (on my Bambu printer I can do this while printing).
Print Plate #7 Mini HH_75x75_Rectangle (Plain) Window: 3 colors, pause at layer 30
Print Plate #8 Mini HH_75x37.5_Curved (Plain) Window: 3 colors, pause at layer 30
Print Plate #9 Mini HH_75x37.5_Curved Rat Window:3 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #10 Mini HH_75x37.5_Plain Wall Panel: 1 color, pause at layer 30
Print Plate #11 Mini HH_150x75_Curved Skeleton & Ghost Window: 4 colors, pause at layer 30; cut and insert filament pieces to fit into filament chamber areas
Print Plate #12 Mini HH_150x75_Curved (Plain) Window: 3 colors, pause at layer 30
Print Plate #13 Mini HH_150x75_Tree Wall: 2 colors, pause at layer 30
Print Plate #14 Mini HH_75x75_Floor Piece: 1 color, pause at layer 30
Print Plate #15 Mini HH_75x37.5_Floor Piece: 1 color, pause at layer 30
Print Plate #16a Mini HH Front Porch: 1 color, pause at layer 30
Print Plate #16b Mini HH Porch Pillars: 1 color, pause at layer 30
Print Plate #17a Mini HH Tombstone Noah&RIP: 2 colors, pause at layer 30
Print Plate #17b Mini HH Tombstone Ben&Waldo: 2 colors, pause at layer 30
Print Plate #18 Mini HH Front Door Awning: 1 color, pause at layer 30
Print Plate #19 Mini HH_75x85_roof: 1 color, pause at layer 30
Print Plate #20 Mini HH_90x85_roof (no chimney): 1 color, pause at layer 30
Print Plate #21a Mini HH_90x85_roof with chimney: 1 color, pause at layer 30
Print Plate #21b Mini HH Chimney Cap: 1 color, pause at layer 30

Have fun printing!

Mini Magnetic Tile Haunted House Collection

(21a) Mini HH_90x85_roof with chimney.stl

**9/1/24 Design Improvement: ** I've made assembling these cake boxes even easier. Previously, you needed to glue multiple separate bottom cream pieces, which could be time consuming and sometimes tricky to align. Now, all the cream details are part of the bottom plate, allowing you to print one large piece and glue it to the base. This update not only simplifies the assembly process but also ensures perfect alignment every time.

Introducing the Kitschy Halloween Coffin Cake Box! Get into the spirit of Halloween with this delightfully kitschy coffin-shaped cake, perfect for holiday decor or creative storage. This unique design features a fully 3D-printed hinge, allowing for easy assembly with just a bit of super glue. Crafted with the charm of retro Americana, it’s an ideal addition to any Halloween enthusiast’s collection or a fun, spooky centerpiece for your festivities. Whether you're stashing treats or treasures, this coffin is ready to add a touch of whimsy to your Halloween décor.

**Print Settings**
- I recommend using a brim for large items with corners to prevent warping.
- No supports needed for printing. To see the best printing orientation, check the .3mf file.
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12 - 0.2 mm layer height

**Assembly**
Watch assembly video here: https://youtu.be/9UebHzEXlmM
**_Note: With the new design update, you can now skip the step where separate cream pieces are glued individually. Instead, simply glue the entire bottom plate, which includes all the cream details, onto the cake for a faster and easier assembly._**


Kitschy Halloween Coffin Cake Box

pixelandpapier__coffin_cake__top.stl

pixelandpapier__coffin_cake__bottom_cream.stl

**This 3D design is for personal use only if purchased individually. To obtain the rights for commercial sale, you must join the Commercial Maker Thangs Membership.**

Get ready to celebrate Halloween in retro style with the Halloween Advent Calendar! Designed with a midcentury horror kitsch vibe, this advent calendar is perfect for loading up with your favorite treats—whether it’s candy, spooky trinkets, or other fun surprises. Each day reveals a new delight, making the countdown to Halloween even more exciting!

What’s even better? You don’t have to add numbers if you prefer to use it as a a spooky drawer decor piece!

I’ve put a lot of love into crafting this design, inspired by the bold, nostalgic decor of the past. It’s a fun and unique way to add a touch of vintage charm to your Halloween celebrations!

**Quantity of Each Item to Print for Halloween Advent Calendar**
- Type A Shelf Piece: 1
- Type B Shelf Pieces: 5
- Type C Shelf Piece: 1
- Digit 0: 13
- Digit 1: 14
- Digit 2: 14
- Digit 3: 5
- Digits 4-9: 3
- Small Drawers: 30
- Large Drawer: 1
- Skulls: 31

**Optional Components**
C-Clips: 12 (only if using the clipping method for assembly)

**Print Settings**
- I recommend using a brim for large items with corners to prevent warping.
- No supports needed for printing. To see the best printing orientation, check the .3mf file
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height for the drawers and numbers. 0.12mm to 0.2mm for the shelves

**Assembly**
Watch the assembly here: 
https://youtu.be/JU5uE7ZXDKc

**PLA Used Here:**
Polymaker Peach: https://amzn.to/3ZcBEs6
Polymaker Periwinkle: https://amzn.to/4cQx5ac
Matterhacker Orange: https://www.matterhackers.com/store/l/175mm-pla-filament-orange-1-kg/?aff=7646
Polymaker Muted Red: https://amzn.to/3Za9EVW
Elegoo Black: https://amzn.to/3MwGKIg

Halloween Advent Calendar – Treat Countdown Box or Drawers for Spooky Retro Home Decor

pixelandpapier__halloween_advent__small_drawer.stl

pixelandpapier__halloween_advent__AMS.3mf

Embrace the spirit of Halloween with this kitsch retro-inspired skull gelatin container. This unique piece features a playful gelatin mold-style container, perfect for storing candy, jewelry, or serving as a standout Halloween decoration. Its eye-catching design makes it a versatile addition to any festive or everyday interior. Whether you’re looking to spice up your Halloween decor or need a charming storage solution, this skull container merges functionality with a whimsical, retro charm that’s sure to captivate and delight.

**Print Settings:**
- No brims are needed
- No supports needed
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12 to 0.2mm layer height. **I recommend 0.12mm layer height for the skull to keep the intricate details.**
- Use 3MF file if you want to use your AMS for the skull and display stand 

PLA:
- Polymaker Muted Red: https://amzn.to/3yNF2ib
- Polymaker White: https://amzn.to/3Aqk2Pa
- Elegoo Black: https://amzn.to/3Aqk6hS
- Polymaker Matte Pink: https://amzn.to/4fIO6pj

**Assembly:**
https://youtu.be/VbofIUfNZ0E

halloween decor

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mini Magnetic Tile Haunted House Collection

Kitschy Halloween Coffin Cake Box

Halloween Advent Calendar – Treat Countdown Box or Drawers for Spooky Retro Home Decor

Kitsch Halloween Skull Gelatin Container: Candy, Jewelry Storage, or Spooky Halloween Decor