Jolteon halloween - Pokemon - Fan Art

Dragon Skull - closed jaw - Halloween Decoration

Candy Corn Stacking Candy Bowls

bottom_candy_corn_bowl.stl

Halloween Skull Rose / No Supports

Skull Rose.stl

Flareon Halloween - Pokemon - Fan Art

Dragon Head - Bust 

Kitschy Halloween Coffin Cake Box

pixelandpapier__coffin_cake__top.stl

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942802
**Loose Tolerance Extra Long Bony Basilisk:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Wolf Head Wall Mounted / Headset Holder

WOLF WALL MOUNTED WITH HOLES EYES (1).stl

Stretchy, Slinky Ghosts (3 sizes)

Large Ghost.stl

Espeon halloween - Pokemon - Fan Art

Pumpkin Ball (No Supports, Snaps Together No Glue Required)

Pumpkin Ball Top v1.stl

Wickedwing Dragon

Cinderwing3D_Wickedwing.stl

SCP-049 - The plague Doctor - Fan Art Bust - 10cm 

"SCP-049" by Gabriel Jade and Djkaktus, from the SCP Wiki. Source: scp-wiki.wikidot.com/scp-049. Licensed under CC-BY-SA.

Charmander horror - Pokemon - Fan Art

Cute Ghost Dock Switch - OLED & Classic Version

UNI_Ghost_Dock_Switch_OLED-Holoprops.stl

Skull Book Box

Book cover.stl

Skull & Cones (Pre-Supported)

icecream.stl

Zombie Head (Pre-Supported)

ZombieHead.stl

"Boo" Spinner Fidget Keychain 

A Halloween spinner/keychain made from the word "Boo."  This model prints in place quickly and with no supports needed.  It features independently spinning hoops embedded in the O's of Boo and a built-in hole for a keychain.  I used a multi-color printer to get the different colored embedded hoops.  

**Printing Info:**
**These are just the settings I used to test the model, feel free to use whatever settings work best for you.
- FDM or Resin: FDM or Resin
- Scaling: Can be scaled up, scaling down may not work well.
- Supports: None
- Infill/Perimeters: I just used 10% infill with 2 perimeters, but I would use extra perimeters for more strength.
- Nozzle Size: 0.4
- Layer Height: 0.2

**Printing Assembly:**
Just slice and print, no supports needed.  The embedded hoops in the O's should spin freely.

STL List (1):
- boo_spinner_keychain

hALLOWEEN

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Jolteon halloween - Pokemon - Fan Art

Dragon Skull - closed jaw - Halloween Decoration

Candy Corn Stacking Candy Bowls

Halloween Skull Rose / No Supports

Flareon Halloween - Pokemon - Fan Art

Dragon Head - Bust

Kitschy Halloween Coffin Cake Box

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Wolf Head Wall Mounted / Headset Holder

Stretchy, Slinky Ghosts (3 sizes)

Espeon halloween - Pokemon - Fan Art

Pumpkin Ball (No Supports, Snaps Together No Glue Required)

Wickedwing Dragon

SCP-049 - The plague Doctor - Fan Art Bust - 10cm

Charmander horror - Pokemon - Fan Art

Cute Ghost Dock Switch - OLED & Classic Version

Skull Book Box

Skull & Cones (Pre-Supported)

Zombie Head (Pre-Supported)

"Boo" Spinner Fidget Keychain