Ghosty Skull Planter-Bowl

Ghosty_SkullPlanter.stl

 Glow in the Dark Ghostie

Glow in the Dark Ghostie.stl

Large Pumpkin Egg

Top_Giant_flat top.stl

Rose Skull

Rose Skull V2.stl

Invader Tray 02 by MODERN MACHINE

INVADERTRAY02SHARP.stl

Magic cloth shelf

Cloth_shelf.stl

Bulbasaur Skull - Pokemon - Solid & Hollow

Bulbasaur Skull.stl

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

The cauldron is bubbling, the potions are pouring, and this mystical kitty is up to no good.  With a twitch of its nose and a flick of its paws it weaves magical spells that defy natures laws.  

As the time slips away through a long boring day you may find that your fingers are growing quite bored.  You may reach for a widget but it doesn't quite fidget like the fun little friend in your pocket that's stored.  

So put that phone away and delightfully play with this witchy  and whiskered fun companion that can only be known by its true name alone, and that moniker is the Witch Hat Snappy Cat.

Witch Hat Snappy Cat is the newest playful pet on the prowl in the Snap-Flex collection.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows Snappy Cat to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snappy Cat is the fourth creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for Snappy Cat to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Tight** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Medium Tolerance Witch Hat Snappy Cat:**
Coming Soon
**Loose Tolerance Witch Hat Snappy Cat:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like Snappy Cat, be sure to check out its more mystical, magical twin: Witch Hat Snappy Cat:

**Tight Tolerance Snappy Cat:**
https://than.gs/m/940287
**Medium Tolerance Snappy Cat:**
https://than.gs/m/940289
**Loose Tolerance Snappy Cat:**
https://than.gs/m/940290

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Skeksis Skull (Pre Supported)

Skeksis_Skull.stl

The Wounded Ghosts

Ghost_1_Blood+Knife.stl

Print in Place Flexi Scorpion

Scorpion.stl

Nightmare Before Christmas - Fountain Lamp / Incense Holder

Dragon.stl

Awooga Party Glasses #throwback

Awooga Glasses V1.3mf

Frankenbunny

Frankenbunny.stl

Ornate Potion Bottle - Swoop - Print in place

swoopguildedflat.stl

Lattice Skull Wire Weave

This model is part of a series of Lattice Skulls designed for resin printing. Each model features a different complex lattice structure.

See here for videos:

Square and Diamond: https://youtu.be/2ApAvu3hb6U
Wire Weave and Tangle: https://youtu.be/bzIrmCZ9WpE 

Download 3D files:
Square: https://than.gs/m/948742 
Diamond: https://than.gs/m/948745 
Wire Weave:
Wire Tangle:

These models require an intermediate to advanced experience level to set up and print. 

The models with very thin structures use very little material to print but are delicate and require extra care when printing and processing.

To print, rotate the model 180 degrees upside down so that the top of the skull is oriented to the build plate. The skull is tilted slightly forward to reduce the need for internal supports. If you maintain the forward tilt of the skull you will only need to generate support to the top of the head. The rest of the model will print without the need for supports inside of the skull.


hALLOWEEN

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ghosty Skull Planter-Bowl

Glow in the Dark Ghostie

Large Pumpkin Egg

Rose Skull

Invader Tray 02 by MODERN MACHINE

Magic cloth shelf

Bulbasaur Skull - Pokemon - Solid & Hollow

Witch Hat Snappy Cat - Articulated Snap-Flex Fidget (Tight Joints)

Skeksis Skull (Pre Supported)

The Wounded Ghosts

Print in Place Flexi Scorpion

Nightmare Before Christmas - Fountain Lamp / Incense Holder

Awooga Party Glasses #throwback

Frankenbunny

Ornate Potion Bottle - Swoop - Print in place

Lattice Skull Wire Weave

Cutie Kittys & Halloween Collection

Cauldron Can Cooler / 3MF Included / No Supports

1.5GB Tangle of 260 Spiderwebs (Tight Strand Density)

Skeleton Hands Skull Planter-Bowl