Print of STG-02M Machairodus and STG-03 Scimitar Tooth from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. File set is also separated for the different color palettes between the Machairodus and Scimitar Tooth builds with instructions included. Height of assembled model is approximately 4.00" (101mm) tall at the top of the head.

Machairodus and Scimitar Tooth

Scimitar_Tooth_Yellow.3mf

Print of STG-01 Exor from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head.

Exor

Exor_Beige.3mf

Print of STG-00 Sumilidon from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head and and 4.5" (114mm) at the top head ornaments.

Sumilidon

Sumilidon_Beige.3mf

Print of KLN-02M Maasai Moran and KLN-03 Maasai Laibon from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. File set is also separated for the different color palettes between the Moran and Laibon builds with instructions included. Height of assembled model is approximately 4.00" (101mm) tall at the top of the head.

Maasai Moran and Maasai Laibon

Maasai_Laibon_Leg_Waist_Brown.stl

Print of KLN-01 Unitrix from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head.

Unitrix

Unitrix-Leg_Rear_Skirt_Orange.stl

Print of KLN-00 Warbandit from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. "Head_Cylinder", "Barrel" and "Arm_Rivets" parts will need to be printed 2 times, and Toe and Leg Rivets 6 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.0" (101mm) tall at the top of the head and and 5" (127mm) at the top head ornaments.



Warbandit

Warbandit-Leg_Shin_Brown.stl

Print of MSM-04 Acguy from Mobile Suit Gundam Thunderbolt in roughly 1/144 scale. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. The holes in the knee and elbow joints and the "slots" for the hands should be reamed with a 4mm drill bit to ensure proper fit for the pins that are inserted through them during assembly.

Acguy Thunderbolt Version

Acguy_TB-Torso_Mid_Strip_Beige.stl

Print of KWG-03 Mach Massive from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. Horns will need to be printed 2 times, and Hammer Pins 3 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Mach Massive

Mach_Massive-Head_White.stl

Print of KWG-02 Solin from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts will also be labeled with "R" or "L" in their filenames. A few parts will need to be printed several times for the assembly including the Arm Rivets will need to be printed 12 times, Horn rivets and Arm Claw parts will need to be printed 4 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Solin

Solin-Head_Main_White.stl

Print of KWG-01 Rokusho from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. The "collar" part on the lower arms will need t be reversed when assembling left and right arms. None symmetrical parts will also be labeled with "R" or "L" in their filenames. Horns will need to be printed 2 times, Hammer Pins 3 times and Knee Rivets 4 times. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

Rokusho

Rokusho-Head_Main_White.stl

Print of KBT-03 Kantaros from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. Leg "Plug" part will need to be printed 10 times and go into the circular slots along the shins and waist. Arm "Barrel" and "Back Barrel" parts need to be printed 3 times, one for the right arm and 2 for the left arm. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4" (100mm) tall at the top of the head and and 4.5" (120mm) at the top of the horns.

Kantaros

Kantaros-Head_Main_Yellow.stl

Print of KBT-02 Bayonet from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in their own folders based on what color filament they are to be printed in. Height of assembled model is approximately 4.25" (108mm) tall at the top of the head and and 5.5" (140mm) at the top of the horns.

Bayonet

Bayonet-Head_Main_Black.stl

Print of KBT-01 Metabee from Medabots. Designed to be an articulated 3d printed model kit. Parts will require super glue to assemble. All joints are intended to be printed in PETG so that they may snap together properly. Arms and Legs are symmetrical for the most part and will require to print two of each for left and right sides. None symmetrical parts are labeled with "R" or "L" in their filenames. The model is designed to be color separated. Files are organized in zip file based on what color filament they are to be printed in. Height of assembled model is approximately 4" (100mm) tall at the top of the head and and 5" (127mm) at the top of the horns.

gundam

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Machairodus and Scimitar Tooth

Exor

Sumilidon

Maasai Moran and Maasai Laibon

Unitrix

Warbandit

Acguy Thunderbolt Version

Mach Massive

Solin

Rokusho

Kantaros

Bayonet

Metabee