SKEWBITS // 001 (v1 OUTDATED)

This is problem 001 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 001

GAMES BOOK V2 | SWITCH, DS, 3DS, SD CARD & MICRO SD

GAMES BOOK - COVER - FRONT.STL

Minecraft Chest Box

Bot_Back.stl

SKEWBITS // 002 (v1 *OUTDATED)

This is problem 002 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 002

SKEWBITS // 003 (v1 OUTDATED)

This is problem 003 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 003

Open Chess - Smart Chess Board

Chess board - Chess Board.stl

Gengar -Michael Myers

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpts By @ChelsC423***
Gengar in Costume.

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech***

Labyrinth Puzzle Gift Box

Bottom - Hard - 18 x 18.stl

Collapsing Dice Tower

This dice tower prints-in-place in the retracted position with no supports but after printing it extends to three times its original height. The drawbridge opens to allow the dice through, but a detent keeps it closed when traveling.  The funnel on top and the angle on the bottom mixes the die and makes sure they exit the tower every roll. There is a button on the bottom that locks the tower in position so it wont accidently extended. There is compartment on the bottom for storing dies with a built in catch on the lid.

It is designed to be printed with a .4mm nozzle. The walls are four shells thick, two shells are used for the brick inlay.

Note: if your tower does not extend all the way, pull it apart until you have the desired extension and leave it for a day or two. The plastic will eventually "creep" and you'll get the perfect fit.
Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)

Ergonomic Switch Grip

Hands down the best Nintendo Switch Grip you can print. 
Print it in whatever filament you want. 
Reprint if you chose TPU, that was a bad idea.
I love you.

Parrot Minecraft

Parrot Minecraft.3mf

SKEWBITS // 005 (v1 OUTDATED)

This is problem 005 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 005

Espeon xmas - Pokemon - Fan Art

Espeon xmas - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

SKEWBITS // 010 (v1 OUTDATED)

This is problem 010 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 010

SKEWBITS // 006 (v1 OUTDATED)

This is problem 006 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 006

SKEWBITS // 007 (v1 OUTDATED)

This is problem 007 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 007

SKEWBITS v2.0 Puzzle Game // Preview Set

bit_A_red.stl

SKEWBITS // 008 (v1 OUTDATED)

This is problem 008 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 008

SKEWBITS // 009 (v1 OUTDATED)

This is problem 009 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

SKEWBITS // 009

SKEWBITS // 004 (v1 OUTDATED)

This is problem 004 for my puzzle game [SKEWBITS!](https://thangs.com/designer/Make%20Anything/3d-model/949147?manualModelView=true&source=All+Files)

---

Fit the four puzzle pieces within this silhouette to achieve victory

---

**_Printing Guidelines_**
- Print solid, 2 perimeters, 0.22mm layer height

**NOTE:** The default orientation of this puzzle is to print upside-down (so any squash on the first layers doesn't affect fit). Make sure you orient correctly when playing the game! The puzzle number is embossed on the bottom side of each problem, make sure it's upright. You can use a filament swap or mark the bottom with [markers](https://amzn.to/3tLyRso) if you need to make things more clear.

---

The photographed model was printed using [RepRapper Modified PLA+ ](https://amzn.to/3HzEXQT)

games

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

SKEWBITS // 001 (v1 OUTDATED)

GAMES BOOK V2 | SWITCH, DS, 3DS, SD CARD & MICRO SD

Minecraft Chest Box

SKEWBITS // 002 (v1 *OUTDATED)

SKEWBITS // 003 (v1 OUTDATED)

Open Chess - Smart Chess Board

Gengar -Michael Myers

Labyrinth Puzzle Gift Box

Collapsing Dice Tower

Ergonomic Switch Grip

Parrot Minecraft

SKEWBITS // 005 (v1 OUTDATED)

Espeon xmas - Pokemon - Fan Art

SKEWBITS // 010 (v1 OUTDATED)

SKEWBITS // 006 (v1 OUTDATED)

SKEWBITS // 007 (v1 OUTDATED)

SKEWBITS v2.0 Puzzle Game // Preview Set

SKEWBITS // 008 (v1 OUTDATED)

SKEWBITS // 009 (v1 OUTDATED)

SKEWBITS // 004 (v1 OUTDATED)