pumpkin fun .stl

BOOOO GLASSES - GHOST GLASSES - HALLOWEENWEARABLE CONTEST 

This is one of my remixes of my own model. If you would like to remix these glasses I uploaded them today at the same time. 

these are an EASY print, and say B O O O obviously and are hella cute. 

#halloweenwearable
halloween wearable
wearables
halloweenwearables 


Masquerade Mask -"Masquerade" (Sculptober Day4)

MasqueradeMask.stl

big bubble car (1).stl

This is a fun little car I made a few years ago when I was first learning CAD.  It's actually. for storing things, like candy or whatever you like.  Print the attached trunk that snaps into place.



Alchemist Gas Mask -"Potion" (Sculptober Day1)

Alchemist GasMask-Potion.stl

Remix of Gyroscope Gear Fidget - Basic

Gear-Fidget.stl

Double Print In Place (PIP) Bearing Gear Fidget

A fun print in place bearing gear fidget.  To break the bearing loose after printing, slightly press up on the middle.  

Check out my other designs for more styles of this fidget! 

Spider Pot Witch's Hat

A Witch's Hat for my Spider Pot

Print without supports

You can download the Spider Pot here: 

Spooky Demon Hand Tensegrity Shadow Box 3MF Painted - String Model

SPOOKY DEVIL DEMON HAND TENSEGRITY SHADOW BOX 3MF version for Bambu Studio- STRING MODEL PAINTED FOR BAMBULAB MMU
DESCRIPTION
This is the first of a Series of String Models I call the The Devil Hand Demon hand Tensegrity Shadow Box... Not only did I make the strings, I also made the frame look like an old picture frame to hang it on the wall.

Print at 0.2 layers, you must use Arachne wall generator OR thin wall detection for this to work.

When done you should have a hand reaching to greet you floating in space.

ENJOY.

Like and follow

PLEASE DO NOT SELL MY MODELS. IF YOU WANT TO SELL JOIN ME ON HERE IN THE MEMBERS AREA OR ON PATREON.

I love @3dprintbunny ... as a designer I have been trying to figure out how she does what she does for months. I finally have something that I am super proud of. SO PLEASE GO FOLLOW, LIKE AND SUPPORT HER TOO. She is a smart and talented modeler.



Goofy Skulls Skull Bowl/Planter

GoofySkulls_Skull-PlanterBowl.stl

Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Long Bony Basilisk:**
https://than.gs/m/936921
**Medium Tolerance Long Bony Basilisk:**
https://than.gs/m/937050

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling, the Short Bony Basilisk:

**Tight Tolerance Short Bony Basilisk:**
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk:**
https://than.gs/m/937047
**Loose Tolerance Short Bony Basilisk:**
https://than.gs/m/937048

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Long Bony Basilisk:**
https://than.gs/m/936921
**Loose Tolerance Long Bony Basilisk:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling, the Short Bony Basilisk:

**Tight Tolerance Short Bony Basilisk:**
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk:**
https://than.gs/m/937047
**Loose Tolerance Short Bony Basilisk:**
https://than.gs/m/937048

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Short Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Short Bony Basilisk: 
https://than.gs/m/936954
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Remix of Universal Monster Coasters - Creature from the Black Lagoon into a keychain

Cute Creature from the Black Lagoon Coaster designed for filament swaps.

Cuten up your Halloween table with these cute Universal Monsters Coasters.

Creatch just wants to be loved just like the rest of us. And he's great at mopping floors!

Multi-color Printing Tips (for 0.2 layer heights):
I started with white, then switched to black at 2.2mm, then switched to green at 3.4mm

Example printed in Hatch box white PLA, Hatchbox Black PLA, & Extrude Signal Green PLA on the Prusa MINI+

Universal Monster Coasters - Creature from the Black Lagoon

Pumpkin Springo C (3 sizes)

pumpkinc-large-supports.stl

Quadrahelix scribe runner

The Quadrahelix scribe runner.
A vessel to contain your instruments of creativity. 
I designed this using 4 helix and gave it a rounded bottom so creativity doesn't get lost in the vessel. This also has a bit of springiness to it when its printed. Kinda neat.
Printed with ProtoPasta metallic teal Mermaid's Tale


FHW: Mini Town Truck (Jason V)

Hello Tribe,
PLease njoy this Halloween themed turck for mini town.
Cheers
Maker Millwright

fun

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

pumpkin fun .stl

View 91 new models

Masquerade Mask -"Masquerade" (Sculptober Day4)

big bubble car (1).stl

Alchemist Gas Mask -"Potion" (Sculptober Day1)

Remix of Gyroscope Gear Fidget - Basic

View 39 new models

View 10 new models

View 89 new models

Goofy Skulls Skull Bowl/Planter

Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

Short Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

Remix of Universal Monster Coasters - Creature from the Black Lagoon into a keychain

View 78 new models

View 45 new models

Universal Monster Coasters - Creature from the Black Lagoon

FHW: Mini Town Truck (Jason V)

Springy Arm Ghost - Elastic Band Kit

View 11 new models