Set the first layer to 0.10mm for better color infusion (if you are using filament like **Esun PLA-Silk Mystic** ,whic i used.)
For the rest of the print, set the layer height to 0.22mm.

**Add a pause at layer 3** to lay down the fabric and secure it with magnets.(https://www.amazon.com/dp/B096G9JN3X)

**Add another pause at layer 16** to place the magnets.
The magnet size is **20x10x2mm**. When the print pauses at layer 16, place the **4 magnets** for the lid.(https://www.amazon.com/dp/B0BMTZX4ND?th=1) 
**Ensure all magnets are placed facing the same direction; otherwise, the lid will not close properly.**

You can use the plate included with the file to cut the inner fabric of the bag (https://www.amazon.com/dp/B0BXSKQRZ4?th=1)
Once the fabric is cut, place it inside the bag accordingly and glue it using **Pattex Contact adhesive (plastic version) or E6000.**

Before assembling the side parts of the bag, press the tip of a sharp knife into the hole to make an opening for attaching the D-ring. You need to pierce the fabric from the inside of the bag outward. If you try to pierce it from the outside in, the fabric might come apart—though I haven't tested this myself. It's best to follow the method I used.
After making the hole in the fabric, you can super glue the side parts of the bag together. Once the bag is assembled, you will need these parts: https://www.amazon.com/dp/B0BM7D31RP?th=1    https://www.amazon.com/dp/B0CSN9CY8Y?th=1 


**I would like to extend my special thanks and respect to Kaizen3DPrints, who inspired me to create this model and allowed me to sell it as a model. I saw the clutch bag video on YouTube, and until that moment, the idea of 3D printing on fabric with an FDM printer had never crossed my mind. He showed me an entirely new ocean.**

The video I added is the video of **Kaizen3DPrints** assembling the bag, and my version goes through the same steps. By watching his video, you can also assemble this bag, which will also help his videos get more views. The main reason I added his video is that my speaking isn't fluent. If I could speak more fluently, I would have made my own video. (At this point, I'm saving your ears from the pain)










Polka Dot And Square Pattern Clutch Bag

3d clutch bag obj.obj

There are three versions- Edit - There are now two additional variations, one that has a thicker base and one with a thicker base and small frame around the design.

I have edited the top magnetic bars to have splits in them, so the clutch is able to be opened much wider than the previous version.
 
Version 1 if you'd prefer to use snap fasteners (size 15) instead of E6000

Version 2 with the jump ring holes that are closer to the top of the sides 

Version 3 with holes that are designed to fit the Chicago style screw fastener listed below (https://a.co/d/eJTBKzu) This is my preferred method.  

There is also a template you can print out for cutting your fabric that has two hole options depending on the print that you choose, both in STL and PDF format (A3 and A4 size)

This is printed at .24mm layer height. There is a pause command inserted at layer 2 to add the fabric (two variations now have the pause at layer 3), and another pause at layer 14 (or layer 15 depending on the model chosen) to add 10 magnets that are 10mm x 2mm, all facing the same orientation.

There are holes at the top of the clutch for either jump rings or Chicago style rings to attach your strap of choice. More details can be found in the attached printing guide.

This is intended to be printed face down on a build sheet that offers some effect, but the textured effect can be just as cool. I like using tri color silk PLA with these, with the bottom layer as octogram spiral - Change the bottom layer pattern to get a different effect! My favorites are octagram spiral and archimidean chords


foldable clutch

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Polka Dot And Square Pattern Clutch Bag