Low-poly Chikorita Flowerpot and Tray

Chikorita Pot and Tray.stl

PRICKLY PEAR KEYCHAIN 002 - Cactus 

01.  PRICKLY PEAR KEYCHAIN 002 - WITH RING.stl

Flower Pot 1

flower-pot1.stl

Bunny Pot - Single and Multi-material

Bunny Lid_MM.stl

PRICKLY PEAR KEYCHAIN 001 - Cactus - Floors

01.  PRICKLY PEAR KEYCHAIN 001 - WITH RING.stl

KROMATIK Vase 001

KROMATIK_001_1.2mm.stl

Mushroom garden decoration “Morchella Esculenta”

Esculentafungus_deco_A.stl

Mushroom garden decoration “Boletus Edulis”

mushroom.stl

Abstract Pot

Pot.stl

 FLOWER POT SET

POT PICCOLA.stl

Planter “Double Glitch”

Glitch_double_planter.stl

Planter “Glitch”

Glitch_planter.stl

Wall planter “Glitch”

Planter_with_saucer.stl

Planter “Sylvatica Tree”

Planter.stl

Owl Planter and Owl Pencil pot

Owl Planter.stl

Hex vase | Vase mode

Hex vase.stl

Happy Halloween Tree

Gracewindale-halloween-tree.stl

Planter castle

**A castle inspired planter with water drainage via the moat.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 153 x 157 x 102 mm with a inner size of ca 96x96x90mm and a wall thickness/small feature diameter of 2mm minimum
- Downscaling (99% – 61%): works great
Minimum size (60%):  62 x 65 x 61 mm with a inner size of ca 58x58x54mm and a wall thickness/small feature diameter of 1.2mm minimum
- Everything smaller than that is not tested but maybe possible :D

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: 16h (100% scale): 16h

Material usage (60% scale): 50g
Print time: 16h (60% scale): 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 15%
Build plate adhesion type: none

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, callibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

flowerpot

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Low-poly Chikorita Flowerpot and Tray

PRICKLY PEAR KEYCHAIN 002 - Cactus

Flower Pot 1

Bunny Pot - Single and Multi-material

PRICKLY PEAR KEYCHAIN 001 - Cactus - Floors

KROMATIK Vase 001

Mushroom garden decoration “Morchella Esculenta”

Mushroom garden decoration “Boletus Edulis”

Abstract Pot

FLOWER POT SET

Planter “Double Glitch”

Planter “Glitch”

Wall planter “Glitch”

Planter “Sylvatica Tree”

Owl Planter and Owl Pencil pot

Hex vase | Vase mode

View 143 new models

Planter castle

View 31 new models

Cactus Monster