Uvas | Vase

Vase model Uvas.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (uvas.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and purple matte PLA)

Burbuja | Vase

Vase model Burbuja.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (burbuja.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and blue matte PLA)

burbuja.stl

Dama | Vase

Vase model Dama.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and PLA matte lady)

Magma | Vase

Magma vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (magma.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and black matte PLA)

Tronco | Vase

Tronco vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (trunk.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and green matte PLA)

Redvelvet | Vase

Red Velvet vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (redvelvet.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

(Recommended layer height of about 0.2 mm and red matte PLA)

Girasol | Vase

Sunflower vase.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (girasol.stl) modifying in the shell section of the slicer the following parameters:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (you can increase it if you want thicker walls)

(Recommended layer height of about 0.2 mm and orange matte PLA)

Anima | Vase

Vase model Ánima.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (anima.stl) by modifying the following parameters in the shell section of the slicer:
Top layers: 0
Bottom Layers: 5 (minimum)
Wall line count: 3 (can be increased if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of about 0.2 mm and matte black PLA)

Perla | Vase

Vase model Perla.

From the collection "32 vases".

Ideal for decoration, as well as being a useful vase to place flowers or anything you want.

**3D PRINTING PARAMETERS**
The model is created in such a way that no support is needed.

Use the solid model (perla.stl) modifying in the shell section of the slicer the following parameters:
- Top layers: 0
- Bottom Layers: 5 (minimum)
- Wall line count: 3 (you can increase it if you want thicker walls)

Or simply (and recommended) use the vase mode.

(Recommended layer height of around 0.2 mm
PLA matt white or light grey)

flower

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Uvas | Vase

Burbuja | Vase

Dama | Vase

Magma | Vase

Tronco | Vase

Redvelvet | Vase

Girasol | Vase

Anima | Vase

Perla | Vase

Sunflower of Hope

Sakura Cherry Blossom Phone Stand - Cute Desk Accessory

Miniature Vases - Vol. #1

Rosebud Cookie Cutter STL File - 4 inches

FLOWER BASE.3mf

Floral Swag Cookie Cutter STL File - 4 inches

Crayon Holder | Flower

Vibrant explosions of color made up of flowers - set of bookmarks

Pink Fairy Floral Openwork Vase

Crocus Resin Frame

Wild Poppy Resin Frame