This Yarn Bowl features a thick regular knit pattern on the sides and bottom. Use it to keep your ball of yarn from running away!
 
See here for video: https://youtu.be/N_JygGQk8I0 

When printing, you will need to set up supports for the top and bottom of the front swirl-shaped piece. Tree supports work well. You will not need supports elsewhere, but you might get small areas of print fail in some of the unavoidable overhangs within the knit geometry. These can be removed easily with a file if you wish.


Yarn Bowl

This Yarn Bowl features a thick regular knit pattern on the sides and bottom. Use it to keep your ball of yarn from running away!

See here for video: https://youtu.be/N_JygGQk8I0 

When printing, you will need to set up supports for the top and bottom of the front swirl-shaped piece. Tree supports work well. You will not need supports elsewhere, but you might get small areas of print fail in some of the unavoidable overhangs within the knit geometry. These can be removed easily with a file if you wish.


A knitting project for those of us that can’t knit.

See here for video: https://youtu.be/uQI1Cdas2Jg

Other Round Textile Bowls you might like:
Garter Knit  (Circumferential): https://social.thangs.com/m/507033 
Garter Knit (Vertical): https://social.thangs.com/m/507034
Rib Knit: https://social.thangs.com/m/450318
Regular knit: https://social.thangs.com/m/304075
Braided: https://social.thangs.com/m/348734 
Wicker (Vertical Stakes): https://social.thangs.com/m/475748  
Wicker (Circumferential Stakes): https://social.thangs.com/m/475733


Knitted Bowl

A knitting project for those of us that can’t knit.

Prevent frustration, hand cramps, and ruined work with this clever self-closing mock ring holder. No more paper clips, no more stiff pinkies, no more cutting out sections thanks to a ring that self-closed too early.

When creating a self-closing mock ring for your next tatting project, simply rest the SCMR holder in the thread loop to:

1. hold the loop open and prevent it from closing accidentally
2. prevent your thread from twisting on itself
3. prevent hand cramps now that you no longer need to hold the loop open with a finger

Suitable for both shuttle tatting and needle tatting, the SCMR holder is lightweight and compact to fit in any tatting bag or caddy. Tabs on either end of the tool help keep the thread in place while the tool is in use, and a built-in loop allows you to attach a jump ring for a lanyard or chatelaine. (Jump ring, lanyard, or chatelaine not included.)

3D print this ready-to-go STL file in your choice of material and color; I use PLA.

Printing recommendations:

* If you have adhesion issues, use a brim or helper discs on the two ends of the SCMR Holder.
* Printing with a 0.2mm or 0.25mm high-detail nozzle is highly recommended, since the catch tabs on the ends of the SCMR Holder will work better.

--

If you like my work and want to support me, please [check out my online store](https://shop.stephaniecervi.design) or [become a patron](https://www.patreon.com/stephaniecervidesign). Thank you!

--

Don't want to print your own SCMR holder and would rather buy a pre-made version? [I have the pre-made tools available here](https://shop.stephaniecervi.design/products/self-closing-mock-ring-holder-tatting-tool).

--

Licensed for personal use only. [Commercial licenses available here](https://shop.stephaniecervi.design/pages/personal-commercial-licensing). Please do not redistribute this file or any modified derivatives of this file in any way, or sell your own prints made from this file. Thank you.

Self-Closing Mock Ring Holder - Tatting Tool

Mock ring holder v8.STL

Ever wanted the best part of quilting where you mix colors, fabrics, and patterns but without the sewing?

With the Quilt Pattern Fidget Clicker Keychain you get to play with endless combinations and create unique quilt designs with just a click. Choose **one or four clickers**, experiment with colors, and watch your quilt come to life with no stitching required.  It is all the fun and none of the threading!

For extra stability, add a small dab of superglue to the base of switch so it sits firmly in place. It also fits a ball chain keychain so you can easily attach it to your bag or keys.

**This design requires an AMS.**

**Print Settings**
- No brims required
- No supports required
- 15% infill.
- 2-3 walls
- 0.4mm nozzle
- 0.12mm layer height

**Items Used:**
Pink: https://amzn.to/4hJLeJt
Pink: https://www.matterhackers.com/store/l/175mm-pla-filament-pink-1-kg/sk/M81ZR601?aff=7646
Dark Yellow: https://amzn.to/4fEIxYf
Tan: https://www.matterhackers.com/store/l/pro-series-pla/sk/MZE7T0ST

**Assembly Video:** https://youtu.be/Py1mjyTdV6c

fiber & textile arts

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Yarn Bowl

Knitted Bowl

Self-Closing Mock Ring Holder - Tatting Tool

Quilt Pattern Fidget Clicker Keychain – Mix, Match, and Create Modern Quilts, AMS Required