---

**📦[Keychain Blaster Gift Crate](https://than.gs/m/1155174?affiliateCode=Jaatinen3D) — a stylish storage and gift box that has an insert designed for this blaster!**

---
&nbsp;

_The Desert Eagle is pure excess — massive, unmistakable, and built to make an impact. More icon than sidearm, it’s all about presence._

&nbsp;

---

A compact Desert Eagle -inspired keychain blaster designed for maximum fun in a minimal form factor!

This tiny hand cannon shoots standard 6mm airsoft BBs and features a removable magazine with a 5-round capacity, making it surprisingly satisfying to load and fire despite its size. The design focuses on clean mechanics, reliable function, and a crisp tactile feel.

Perfect as a desk toy, fidget gadget, or just a pocket-sized conversation starter.

&nbsp;

---

**Printing tips:**
No AMS required to make this multicolor, all the different colored parts are separate!

All the parts are already in the optimal orientation for printing!

The following parts require supports:
- _Frame_ — Normal supports
- _Hammer_ — Normal supports
- _Front Slide_ — Normal supports, just a little for the front sight

_Rear Slide_ has small built-in supports you have to remove before assembly.

I recommend brim for the _Rear Slide_ because it warps very easily at the back and the contact area is pretty small. It's also a good idea to use brim for _Barrel_, _Front Slide_, _Rear Slide Spring Cap_ and _Grip_ depending on your bed adhesion.

If you use Bambu Studio or OrcaSlicer, a handy print project file is included with the settings I used to print this!

&nbsp;

---

**Assembly:**
You'll need superglue and two small 5mm diameter springs 20-25mm long.

See the included assembly video (listed above the promo pics)!

&nbsp;

---

_**If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. [Please check out my membership plans!](https://than.gs/u/803093?plans=true&affiliateCode=Jaatinen3D) ❤**_

Desert Eagle Keychain — Functional Blaster Toy

Frame.stl

Stop hanging your life on the floor! 🎒🚫

Tired of those flimsy, plastic bag hooks that snap the moment you hang a real backpack? I designed The Royal Hook for those who need strength, elegance, and reliability.

This isn't just a hook; it’s a high-performance mechanical accessory for your daily life. Whether you are in a classroom, a restaurant, or at your studio desk, this hook keeps your gear safe and off the ground.

Why it’s "Royal":
✅ Extreme Strength: Engineered with reinforced stress points to support heavy backpacks and professional bags. 🏋️‍♂️
✅ Foldable & Portable: A clever mechanical design that folds into itself, making it easy to toss in your pocket or bag. 📐
✅ Universal Grip: Designed to fit perfectly on most tables and desks with maximum stability.
✅ Elegant Design: A bold, royal aesthetic that looks like a piece of modern gear, not a cheap toy. 👑

Technical Note: After 4 iterations of prototyping and stress-testing, the tolerances are now perfect. It’s a smooth, satisfying mechanical movement that won’t let you down.

Stop compromising. Give your bag the throne it deserves! 👑🔥

The files are not permitted for commercial use. Anyone interested can contact me privately.

3D printing settings
The attached 3MF file is already perfectly set up with Orca slicer with all the parameters to guarantee your large regal hook has the right strength and lightness it needs

Foldable Bag Hanger – Heavy Duty Table Hook for Backpack & Purse

Foldable Hook.stl

# The R7Makers Ledger V2 | Tickets Closed

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Tickets Closed**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Tickets Closed | R7Makers

BooksCountedBook_Pages.stl

# The R7Makers Ledger V2 | Practice Completed

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Practice Completed**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Practice Completed | R7Makers

BooksCountedBookFront.3mf

# The R7Makers Ledger V2 | Projects Completed

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **BProjects Completed**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Projects Completed | R7Makers

# The R7Makers Ledger V2 | Debt Paid

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Debt Paid**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Debt Paid | R7Makers

# The R7Makers Ledger V2 | Chores Completed

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Chores Completed**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)




The R7Makers Ledger V2 | Chores Complete | R7Makers

# The R7Makers Ledger V2 | Books Read

**Refinement meets function. The Ledger V2 is a modular, mechanical tracking system designed for those who find satisfaction in the tactile "click" of progress. Whether you are tracking milestones, inventory, or personal goals, this V2 update brings a smoother, more ergonomic feel to your favorite desk companion.**

### 🛠️ **The V2 Architecture**
This isn't just a counter; it's a piece of "Slicer Engineering." 
* **Rounded Ergonomics:** Version 2 features slightly rounded corners, removing the sharp edges of the original design for a premium, retail-quality hand-feel.
* **Textured Pro Finish:** This model is optimized for **Face-Down** printing. When used with a textured PEI plate, the layer lines disappear, leaving a professional matte finish.
* **Filament-Pin Hinge:** Uses a simple strand of 1.75mm filament as the hinge pin. No complex hardware required—just thread it through and "mushroom" the ends with a heat source for a permanent bond.

### ⚙️ **The Tracking Face**
This specific Ledger is labeled for: **Books Read**. 
It features a high-contrast mechanical counter (0-999) that stays securely closed thanks to four **9mm x 3mm magnets**.

### 📦 **What You Get**
* **Tuned 3MF File:** Pre-painted and pre-oriented for the best tactile results.
* **Modular STL Parts:** Includes the V2 rounded cover, internal pages, and mechanical spine.

---

### 🚀 **Complete the Collection**
This Ledger is part of a growing modular system. Check out the other variations in my store to track:
* **Books Read**
* **Chores Completed**
* **Debt Paid Off**
* **Practice Completed**
* **Projects Completed**
* **Tickets Closed**

### 🏆 **Merchant Rights & Chapters**
Interested in selling physical versions of the Ledger? This model is part of **Welcome Pack** of the R7Makers Membership.
* **Subscribers** get every Ledger variation automatically.
* **Merchant Tier** members earn the right to sell physical prints of my entire library, while subscribed.

👉 [**Join the R7Makers Journey**](https://thangs.com/designer/R7Makers/memberships)


edc

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Desert Eagle Keychain — Functional Blaster Toy

Foldable Bag Hanger – Heavy Duty Table Hook for Backpack & Purse

The R7Makers Ledger V2 | Tickets Closed | R7Makers