CHACHAPOYAS POT - ANCIENT PERUVIAN CULTURE DESIGN

TIMUX_MA_PACHAMAMA.stl

Impact Base Pack (8pcs) - Round and Square Versions

Impact Base 30sq.stl

Set of 3 Bookmarks depicting Mother Earth as a Living Tree with energy into the World

motherearth.3mf

Shenlong - Dragon of Earth with Scenic Base (Pre-Supported)

Earth Dragon Body Whole.stl

Lava and Wasteland Printable Bases

Morthan-Base-Oval-B.stl

Female Earth Genasi Paladin / Fighter - Zara the Genasi Paladin ( paladin with spear and shield )

Moonlight Minis Logo Coin.stl

Articulated Mushroom Dragon

Mushroom Dragon_w_wings_dec.stl

Tropical Flower Square Base Pack (4pcs)

cobramode-43-tropicalflower-base-50sq.stl

(32mm) Eva, Dryad of the Emerald Grove

supported-32mm-eva-main-supported.stl

Earth Elemental - Tabletop Miniature (Pre-Supported)

Elemental_Earth_54mm.stl

Earth Badge Token

Earth Badge.stl

Moon.stl

Solar System Display

Solar System Display.stl

Icosahedron Earth // Folding Polyhedra

large-full-land-all.stl

Prowler logo Mile morales Earth-42.stl

Earth-42 Miles morales - The Prowler logo.



Earth 42 Spider

This is a model of the Spider that bit Miles Morales.

Fong Hai, The Lie Collector

FongHai_v02.stl

Earth Lithopanes

This is a Earth Lithopane for you to remix.
There are different sizes 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 225, mm and 250 mm on there.
It's designed for an FDM printer with a 0.4 mm nozzle. You may be able to print this with bigger nozzles, if you use the layer height and width i recommend.
Print settings:
Domes are quite hard to print. I never printed this as a whole, I always cut it into pieces first.
Layer Height 0.2 mm
Layer Width 0.4 mm
No supports.
I always decrease the speed at the top of the dome (when the bridging occurs) to 50%. You can do this in Cura using the extension post-processing.
I use standard white PLA for these. If you are unsure if your filament works, just shine through the walls of the print with your phone lamp at something like 10% print completion. You should see the Lithophane effect.

Remember to add me when you remix this, I'm eager to see what you do with this. I made some ready to print lamps with this, you can check them out at my site.

If you used this, please consider buying me a coffee at https://www.buymeacoffee.com/Ri0m0

Hybrid Hanging/Desk Earth Lamp

Introducing the mesmerizing Hybrid Earth Lamp. With its versatile design, you have the option to either screw the legs out and hang it from the ceiling or use the convenient leg holder to keep them safe when not in use. (it's kind of pointless for this model earth will be upside down if you hang it from the ceiling)

To bring the Hybrid Earth Lamp to life, you'll need a lamp socket and a bulb. For an enchanting display, I recommend using a Multi-color LED bulb. Depending on your location, you can find suitable options through the following links:

EU Plug:
https://ebay.us/PRcPvm

US Plug:
https://ebay.us/hBRN1i

You support me by suing these Links! :D

Enhance the ambiance with the perfect bulb:

EU:
https://ebay.us/yB4Acp

US:
https://ebay.us/oTWuS1

You support me by suing these Links! :D

Print Settings:
To create this, you only need to print the numbered files. The additional files are included in case you require separate prints. When printing the Mercury model, use a 0.4 mm nozzle or set a line height of 0.2 mm and a width of 0.4 mm. The domes can be challenging to print, but I recommend slowing down the layers at the top to 50% print speed (around layer 670). Achieve optimal strength by using 100% infill with concentric infill, or you can set your wall count to a higher value, such as 40. Basic white PLA works perfectly; I used Sunlu White PLA+ for my model. Avoid matte or glitter filaments as they may not produce the desired effect. No supports are required for printing.

For the legs and plate, no supports are needed. For a visually appealing result, try positioning the seam on the inside of the legs. Feel free to choose any color that suits your taste.

Enjoy the captivating beauty of your completed Hybrid Earth Lamp! If you find joy in this creation, please consider supporting my work by buying me a coffee at https://www.buymeacoffee.com/Ri0m0. As a struggling student, every contribution helps me continue my filament-fueled endeavors.

Check out my profile for more incredible lamp designs or stay tuned for upcoming releases. Here are some other mesmerizing hybrid lamps you might like:

Mercury: https://www.thingiverse.com/thing:6062935
Pluto: https://www.thingiverse.com/thing:6058417
Sun: https://www.thingiverse.com/thing:6036612
Mars : https://www.thingiverse.com/thing:6036600
Jupiter: https://www.thingiverse.com/thing:6036586
Football: https://www.thingiverse.com/thing:6036569
Asteroid Vesta: https://www.thingiverse.com/thing:6036559
Basketball: https://www.thingiverse.com/thing:6036547
Venus: https://www.thingiverse.com/thing:6034731
Moon: https://www.thingiverse.com/thing:6034515

Each lamp combines the beauty of space with stunning design. Explore the universe of possibilities!

Please note that this design is provided under a non-commercial license.

Earth Desk Lamp

Hey!
This is my Earth Desk Lamp.

You will need a lamp socket, and a bulb. I like to use a Multi color LED. These parts will only work with this Lamp Socket from Ebay. (it has an EU Plug)

EU Plug:

https://ebay.us/ASMco5

Bulb:

https://ebay.us/yB4Acp

You Support me by using these links!
US version coming soon!

Print Settings:
You only need to print the numbered files.
Earth: Use a 0.4 mm Nozzle! or a line height of 0.2 mm and a width of 0.4 mm.
Domes are quite hard to print. I always slow down the layers at the top to 50% print speed (at layer 670).
Use 100% infill with concentric infill, or set your wall count to something ridiculous like 40.
Any Basic white PLA will do the job just fine. I used Sunlu White PLA+ if that helps. Don't try Matte or glitter stuff, it will not work.
No supports!

Holder:
Print with supports.

That's it. Enjoy your Lamp. :D If you made one, please consider Buying me a coffee at https://www.buymeacoffee.com/Ri0m0
I'm a poor student in need of filament.

I also have other lamps on my Profile (or they are coming soon!) check them out.
Don't be afraid to ask if something doesn't work, or you have suggestions.

Please note, this is provided as a non-commercial license.

earth

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 30 new models

View 12 new models

Set of 3 Bookmarks depicting Mother Earth as a Living Tree with energy into the World

View 58 new models

View 626 new models

View 39 new models

View 17 new models

View 61 new models

View 65 new models

View 45 new models

Earth Badge Token

Moon.stl

Solar System Display

View 78 new models

Prowler logo Mile morales Earth-42.stl

Earth 42 Spider

Fong Hai, The Lie Collector

View 15 new models

Hybrid Hanging/Desk Earth Lamp

Earth Desk Lamp