Hero Me Gen7 Release 4 ZIP

**This STL is an example of a completed Hero Me Gen7 printhead mounted to the X carriage of a 3D printer.**

Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: **[MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)**

The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. 

But If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs. 

by becoming a member you will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Hero Me Gen7 Example Model 1.stl

Batwing Ornament - Batman - Christmas Day 9

batwing-ornament-top.stl

Hydra Tool Box Multipart with Flipped Logo

Hydra Tool Box Lid Multipart Frikarte3D.stl

Coral Snowflake Wall Sculpture

This sculpture, entitled Coral Snowflake, is crafted from 30 identical 3D printed forms that are assembled into an interlocking hexagonal grid. From: http://herschelshapiro.com/coral-snowflake/

Assembling a 30 piece sculpture as shown in the picture requires 140pcs of #4 x 1/2" Stainless Steel Flathead Self Tapping Screws.

ClampDock Accessory - Design Blank

ClampDock 1v00a accessory blank (with support).iges

FREE Proxy marine - Very Modular

Helmet.stl

sv06_light_arms_v2.stl

A led bar light mount for the Sovol SV06. Includes holes to use either a 3mm bolt or setscrew to tighten it to the machine.

Vase “Betulus Tree”

Vase_betulus_tree.stl

40 mm, Mid Thread, T-Rod

40 mm - Mid Thread - T-Rod.stl

Wereraven - Tabletop Miniature

Wereraven_04_32mm.stl

Schoens Gyroid Egg

Schoens Gyroid Egg.stl

6x6 MU - Center Grid Interfitted - MultiBoard Octagon Plate - 4x Multi-Material Stack

6x6 Multiboard Core Tile - x4 Multi-Material Stack.stl

Bart Simpson Skateboard.stl

Bart Simpson Model with Skateboard 
Ready to Print

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

3x1x0.5 CU - Simple Walls - Multibin Shell

3x1x0.5, No Lock Holes, Multigrid Bin.stl

BMO - Print In Place

BMO - Print In Place easy to print. no support needed.

happy printing 

3D Printable Mushroom Baby Figure: Game of Shrooms 2024

Baby Mushroom.stl

GEN2 Table Top Kit V2 - 115

Cover - Upper - Single -  MEDIUM.stl

Bloom Planter Pot by MODERN MACHINE

BLOOMPLANTER.stl

FREE Z-MINIS PACMAN

Ghost 2.stl

CHEP 2-Color PTFE Cutter Top Section (1 of 2)

This the top section of the two-color PTFE cutter Chuck hellebuyck showed on his Filament Friday YouTube show. You will also need the bottom half to complete the print. 

CHEP 2 Color PTFE Cutter Top Section

e

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hero Me Gen7 Release 4 ZIP

Batwing Ornament - Batman - Christmas Day 9

Hydra Tool Box Multipart with Flipped Logo

Coral Snowflake Wall Sculpture

ClampDock Accessory - Design Blank

FREE Proxy marine - Very Modular

sv06_light_arms_v2.stl

Vase “Betulus Tree”

40 mm, Mid Thread, T-Rod

Wereraven - Tabletop Miniature

Schoens Gyroid Egg

6x6 MU - Center Grid Interfitted - MultiBoard Octagon Plate - 4x Multi-Material Stack

Bart Simpson Skateboard.stl

3x1x0.5 CU - Simple Walls - Multibin Shell

BMO - Print In Place

3D Printable Mushroom Baby Figure: Game of Shrooms 2024

GEN2 Table Top Kit V2 - 115

Bloom Planter Pot by MODERN MACHINE

FREE Z-MINIS PACMAN

CHEP 2-Color PTFE Cutter Top Section (1 of 2)