Dark Knight Halberd - With Free Dragon  - 5e DnD Inspired for RPG and Wargamers

Dark_Knight_Halberd_Melee_Minion_Monster.stl

Articulated Crab in Shell 

Crab_in_ShellFinal.obj

Spiral Christmas Balls

#Summary
These are a quick, fun, and are very lightweight. Each ball has the same cross-section and twist. The main differences are the size and number of arms.

* Large ball: 80mm diameter, weighs less than 17g, takes about 6 hours to print
* Small ball: 56mm diameter, weighs less than 9g, takes about 3 hours to print

These are part of my [Christmas Collection](https://www.thingiverse.com/dazus/collections/christmas-collection).

I designed these using Affinity Designer (for cross-sections) and Blender (everything else).

The arms need support at multiple points to keep from warping and breaking if you're using an FDM printer. To make this quick and easy, I provided a version of each ornament with built-in supports. I still had Cura add supports, but only where the balls touch the build plate. For details, se the print settings below.

#Print Settings
##Basics

* Layer Thickness: 0.15mm
* Walls: 0.4mm (1 line)
* Top/Bottom thickness: 0.45mm (3 layers)
* Build Plate Adhesion: Brim

If you have holes in your print (from the thin walls), I recommend increasing flow and/or print temperature. You might also decrease print speed and travel speed (I use 30mm/second and 80mm/second).

##Infill

Infill is optional. They should print OK without it, but I added some just at the bottom of each ball. I used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill (Lines pattern) for the first 51mm for the large ball and 37mm for the small ball.

##Supports

I recommend using the versions of the balls with built-in supports. You'll still need a little support for the first few layers (where the ball touches the build plate), but my supports make printing the arms of the ball easy. You can remove my supports with your bare hands (no tools) and they leave little or no marks on the print.

I recommend printing these with Cura-generated supports "touching buildplate" with a 60-65 degree overhang angle and a brim for the supports.

For support infill, use Concentric pattern, 10% density. Roof density of 75%, floor density of 50% works well and releases cleanly.

The small ball doesn't need any supports for the inside roof. I found it printed very cleanly. 

The large ball printed well enough for my taste without supports for the roof. It print was a little rough, but it only shows if you pick the ornament up and look up from the bottom of the ornament. When it's hanging on a tree, you'll never see that part of it. There's enough space between the arms of the ornament that you could get tools in to cut up and remove supports if you want to add them, but I don't think it's worth the effort.

Ochot - a geometrical planter/base combo

Plate.3mf

Knurled Fidget Bolt Keychain

Bolt (Long, Knurled, Wide).stl

Small V-Tail Indoor Glider

MicroThunder-MkI.stl

Li'l Wolverine - XMen97 Fanart Collectable Figure

LilWolverine_HarperCrafthall.3mf

3D Printer Tool Holder Multiboard

3D Printer Tool Holder Multiboard.stl

Messy Mushroom (Diamond)

Messy Mushroom Cap Diamond.stl

VENOM STRING-ART / MARVEL / COMICS

VENOM_STRING-ART.stl

Viking Skull Book Box

Viking Skull Cover.stl

Charlie Brown-Halloween Costume

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
***
If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chaoscoretech

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

bowser kirby

I’m back with another amazing Kirby mashup, and this time it's none other than Bowser Kirby! That's right, we're merging the iconic power of Bowser with the adorable and versatile abilities of Kirby.

**this model can only be printed in a single color, for those who prefer multicolor printing, there's a multipart version available on my Patreon page at:  https://www.patreon.com/pressprint
meaning that you can print in multicolor using your ender 3.**

• min scale should be 80%

• use supports for the body

Happy printing.



e

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Dark Knight Halberd - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

Articulated Crab in Shell

Spiral Christmas Balls

Ochot - a geometrical planter/base combo

Knurled Fidget Bolt Keychain

Small V-Tail Indoor Glider

Li'l Wolverine - XMen97 Fanart Collectable Figure

3D Printer Tool Holder Multiboard

Messy Mushroom (Diamond)

VENOM STRING-ART / MARVEL / COMICS

Viking Skull Book Box

Charlie Brown-Halloween Costume

bowser kirby

18 mm Mid Thread, Flat Head, Small Thread Hole, Shank Bolt

Coaster Set Type 7

Bi-Fold Door Hook

Spider Relic - Farcry 3

strawberry with articulated feet - FREE

Small Building B - With Free Dragon - 5e DnD Inspired for RPG and Wargamers

Gridfinity Storage and Carrying Trays