Bearded Dragon Chibi Keychain

This is the keychain version of Our Chibi Bearded Dragon. The hole in the mouth fits a 16mm jumpring or a 1" keychain ring. 

 Tree Dragon Articulating

TreeDragonArticulating.stl

Arc Raiders Anvil Hand Cannon

Hammer t.stl

Print in Place Articulated Cute Baby Dragon Fauna

Cute Baby Dragon Fauna.stl

Ember Guardian Dragon Jar

Dragon_Base.stl

Articulated star Dragon 032 - Print in place - No supports - 3mf - STL

ARTICULATED DRAGON 032.stl

Dragon Mini Keychain

This is the keychain version of our mini dragon

Sonic - Fan Art - PRINT IN PARTS - FULL COLOR

sonic adventure 2.stl

Mini Winged Dragon

Printzee_MiniWingedDragon_15mmClearance.3mf

Tree Dragon Keychain

TreeDragonKeychain.stl

Articulated Dragon Keychain 018

ARTICULATED DRAGON KEYCHAIN 018 - WITH RING.stl

Dragon of Flowers

DragonofFlowers.stl

cute baby dragon!!

result (6).obj

Little Grass Dragon - Articulated - Print in Place - Flexi - No Supports - Fantasy

LittleDragon1+EndK7.stl

Flexi Pug - Articulated Dog, Style #1

FlexiPug_ArticulatedDog_Style1.stl

Headless Horseman  - Articulated Snap-Flex Fidget (Medium Tightness Joints)

PumpkinSpine_MediumTightness.stl

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: https://than.gs/m/933823

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933820
Loose Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933822


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Dragon Jar

dragon_jar.stl

Dragon Egg Lamp

Hey, I'm glad you found my Dragon Egg Lamp.

You will need to buy a lamp socket and a bulp to assamble this.

EU Plug:

https://www.amazon.de/kwmobile-Lampenfassung-Schalter-Lampenaufh%C3%A4ngung-Pendelleuchte/dp/B07GJNQFTV?keywords=kwmobile%2Be27%2Blampenfassung&qid=1684505382&sr=8-5&th=1&linkCode=ll1&tag=ri0m0-21&linkId=eaf75460ed09825a9367f5ff362a73a5&language=de_DE&ref_=as_li_ss_tl

US Plug:

https://www.amazon.com/-/de/dp/B0BTY6VDYN/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=17E68V4WROX8K&keywords=Plug-in%2BLight%2BCord%2Be27&qid=1684505658&sprefix=plug-in%2Blight%2Bcord%2Be27%2Caps%2C173&sr=8-3&th=1

Bulb:

EU:

https://www.amazon.de/Kolbenform-dimmbarkeit-Farbsteuerung-Fernbedienung-Warmwei%C3%9F/dp/B07CNMGXGP?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=osram+led+mehrfarbig+e27&qid=1684505912&sr=8-4&linkCode=ll1&tag=ri0m0-21&linkId=07abaf8ee1dddbd81da2bca540915fc3&language=de_DE&ref_=as_li_ss_tl

US:

https://www.amazon.com/-/de/dp/B07NW17W9V/ref=sr_1_2?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2R8ILT0PASFEX&keywords=e27+Multicolour+LED&qid=1684505841&sprefix=e27+multicolour+led%2Caps%2C195&sr=8-2


Print Settings:
You need the Egg and the holder assemble them like you can see in the last picture.
Egg: Use a 0.4 mm Nozzle! or a line height of 0.2 mm and a width of 0.4 mm.
Domes are quite hard to print. I always slow down the layers at the top to 50% print speed (at layer 670).
Use 100% infill with concentric infill, or set your wall count to something ridiculous like 40.
Any Basic white PLA will do the job just fine. I used Sunlu White PLA+ if that helps. Don't try Matte or glitter stuff, it will not work.
I use a brim of 10 lines to get this to stick.
It prints 16 hours for me. Be patient. The nosse usally scrapes the print at some point but thats kinda normal. This happnes beouse the curve of the print creates a spring effect.
No supports!

Holder: Print with supports.

Happy printing!
That's it. Enjoy your Lamp. :D If you made one, please consider Buying me a coffee at https://www.buymeacoffee.com/Ri0m0
I'm a poor student in need of filament.

Articulated Flexible Red Dragon Toy

red dragon (1).3mf

dragon

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Bearded Dragon Chibi Keychain

Tree Dragon Articulating

Arc Raiders Anvil Hand Cannon

Print in Place Articulated Cute Baby Dragon Fauna

Ember Guardian Dragon Jar

Articulated star Dragon 032 - Print in place - No supports - 3mf - STL

Dragon Mini Keychain

Sonic - Fan Art - PRINT IN PARTS - FULL COLOR

Mini Winged Dragon

Tree Dragon Keychain

Articulated Dragon Keychain 018

Dragon of Flowers

cute baby dragon!!

Little Grass Dragon - Articulated - Print in Place - Flexi - No Supports - Fantasy

Flexi Pug - Articulated Dog, Style #1

Headless Horseman - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Round-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Dragon Jar

Dragon Egg Lamp

Articulated Flexible Red Dragon Toy