Adipose

adipose.3mf

Weeping Angels

weeping angels.3mf

River Song Diary Book Deck Box 

Book Cover.stl

Tardis Cover for Prusa Core L

Glass-SLA (1)-v1_3Demon.stl

K-9, Doctor Who

k9headPart03antennaeRemake.stl

The TARDIS Dice Tower! (No Need for AMS, or Supports!)

The TARDIS 3 ( White ).stl

Baby Dalek

baby_dalek.stl

The TARDIS Storage Box

The TARDIS 2 ( White ).stl

Foldable K9 robot from Doctor Who

GOODesign_Robot-K9.stl

Doctor Who's TARDIS Stained Glass Light Box

Front Frame  (PETG).stl

Tardis in Space - Hueforge Hybrid Print

A wibbly wobbly timey wimey model for all the Whovians out here! 

 

This is another Hueforge Hybrid print, where the Tardis ‘pops out’ of the print for a little personality. This print combines Hueforge filament painting methods with traditional 3D printing to create a lovely pop art style print. 

 

**Note: **If you are using the 3MF for one click printing, all settings will have been applied to the model. I used 5 filaments for this on one AMS and swapped one spool out of the AMS when the colour was finished printing for the 5th colour. 

 
**Note 2:** This print also has steep overhangs with no supports. If you're not confident in your printer handling supports with my 3MF file settings, do not use the one-click printing function and import the 3MF file into your slicer and adjust the settings for the ‘Tardis_Export3.STL’ part of the assembly to suit your own supports/overhang settings. 

 

If you are not using the one-click 3MF, the print instructions and recommendations are as follows:

1. This printed without supports, but I enabled slow down for overhangs. This print DOES require your printer / filament to be dialled in to be able to print the overhangs for the Tardis effectively. If you're not confident, I would enable supports. You would not be able to see it or remove it as the supports should only be applied to areas inside the Tardis. 
2. I used a layer height modifier to modify the layer height specific to the Tardis (2.04mm - 33mm) to increase it to 0.16 to speed up the print.
3. I also modified the infill for the the Tardis and the ‘Generic Cube’ to only print at 10% with 4 walls and 4 top and bottom surfaces. 
4. Since this print re-uses the Blue and the Black, if you are using only 1 AMS, I suggest swapping out Slot 3 (should be orange) for the white when you are swapping the colours out. 
5. My recommendation is to have Black, Blue, Orange, Yellow in Slots 1,2,3, and 4 in the AMS, and then swap the orange for white when the orange is done printing. 
6. If you want to use a different colour for the Tardis, then you can swap out the Blue accordingly

**Filament Instructions**
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Polymaker Starlight Neptune (Blue) Transmission Distance: 1.8
- PLA CC3D Orange Transmission Distance: 7.4
- PLA CC3D  Lemon Yellow Transmission Distance: 8
- PLA Kingroon White Transmission Distance: 8

 

**Swap Instructions:**
- Start with Black
- At layer #8 (0.76mm) swap to Starlight Neptune (Blue)
- At layer #9 (0.84mm) swap to Orange
- At layer #15 (1.32mm) swap to Lemon Yellow
- At layer #17 (1.48mm) swap to White

- At layer #24 (2.04mm) swap to Black

- At layer #27 (2.52mm) swap to Starlight Neptune (for the Tardis!)

Doctor Who Tardis Tissue Box Cover 

2Box_Doctor_Who_Tardis_Tissue_Cover(153mmx296mm).stl

Doctor Who Monster Pawns

Adipose pen pot (no sonic)

Adipose pen pot

Tom baker figure sonic.stl

Action figure version for the classic Tom baker

Tom Baker cosplay sonic

After a fellow Whovian asked me to make this yesterday I decided to knock it up at work…shhh don’t tell the boss lol

4thsonic.stl

Doctor Who Adipose

I deleted the first one as it had a few imperfections so I’ve  corrected those and now I’ve re-uploaded this one.

Adipose (corrected)

TARDIS Styled Cookie Jar

TARDIS Cookie Jar body.stl

TARDIS VASE (support free)

Heres my TARDIS inspired vase made using Fusion 360, I hope some fellow Whovians like is. sadly this is smaller on the inside.

Cookie jar coming soon.

TARDIS VASE

doctor who

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Adipose

Weeping Angels

River Song Diary Book Deck Box

Tardis Cover for Prusa Core L

K-9, Doctor Who

The TARDIS Dice Tower! (No Need for AMS, or Supports!)

Baby Dalek

The TARDIS Storage Box

Foldable K9 robot from Doctor Who

Doctor Who's TARDIS Stained Glass Light Box

Tardis in Space - Hueforge Hybrid Print

Doctor Who Tardis Tissue Box Cover

View 25 new models

Adipose pen pot (no sonic)

Adipose pen pot

Tom baker figure sonic.stl

Tom Baker cosplay sonic

Doctor Who Adipose

TARDIS Styled Cookie Jar

TARDIS VASE (support free)